similar to: Single BLF for ALL trunks in use

Hi, I used Grandstream (gxp2000, gxp2020) and Snom (370) SIP Phones, but with 2 extensions BLF status does not work correctly. have someone ever tested a Sip Phone with more then 60 BLF without problems? Can someone suggest me model and brand? Thanks, bye. -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi The blf-crypt password schema mentioned in the docs could be a solution to my auth problem. However, the docs state that actual support depends on the glibc. Mine apparently doesn't. Does support depend on the glibc's version (mine is 2.15-r2)? Maybe someone with access to a box with a good enough glibc could do the following and post the hash for the plain password "test"?

Is there anyway to "spoof" a BLF signal to a phone from within a dialplan? That being so I can turn a BLF light on or off on a phone when a certain thing happens in a dialplan?

Hi, Does anyone have any experience with a Cisco 7961 + 7914 Operator Console setup and speeddials/BLF on Asterisk 1.4? Would appreciate feedback if this works reliably. I have a 7961 on skinny registering on an 1.4.19 box with chan_sccp and speeddials work fine so that part seems ok. I have no experience with the BLF part. >From googling around it seems that BLF on the 7914 only works with

Hello list, Can I do something like this for BLF functionality : [test-blf] exten => _XX,hint,Macro(GetSIPaccount,${EXTEN}) exten => _XX,hint,SIP/${SIPACCOUNT} GetSIPaccount is a macro that looks at a MySQL-database for the realtime table sip_buddies where the SIPusername is taken from. It works great for internal calls... but how about BLF-functionality ?? Feedback is appreciated !

has anyone done it? -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20080528/ff622d28/attachment-0001.htm

I understand that the Asterisk SLA implementation is somewhat different from most key systems and PBX systems. I also understand that in Asterisk, one does not put an SLA line on hold since it is just a MeetMe conference. However, is there any way to make the BLF flash when the answering party on the Asterisk system presses the hold key on their set and leaves the calling party alone in the

Hello, I have some trouble with the BLF indicator. I have two phones that use the same hint: 13 => hint,1,SIP/phone13&SIP/phone13-wlan This works great from the asterisk side, but it seems the status change is too quick for the attached Grandstream-phones. When I ring the extension the hint changes to "Ringing". The Grandstream blinks. Great. Now, when someone picks up one of

Dear all, I've implemented BLF for use with some Grandstream GXP-2000 phones and it works fine in 1.2.x versions of Asterisk, although I tested it with version 1.4.0 and it doesn't work! Has the needed syntax changed for configure BLF for this version of Asterisk? It it a bug of this version? Or should it be misconfiguration that I'm doing? Thanks, Ricardo.

Hi. Does anyone have a patch or workaround for the 50 BLF limit of Aastra phones? I have a couple 57i with the 560M console and only the first 50 BLF lines get registered. I am using the latest firmware from Aastra but I read that this limit was imposed because of a memory leak. Obviously my customer is complaining about these last 10 lines not showing their status. -- Telecomunicaciones

I have a setup with Yealink phones & Asterisk Server (all latest patches). I am using BLF to display the states of other phones. While this works MOST of the time (busy, being called) it does NOT work when a phone is NOT regisstered at all, the yealink phones display a green dot EVEN if a phone is turned off (try explain this to users, they are shaking their heads!!!) I can see on the

I'm trying to get the BLF to work correctly on my Polycom phones. I have the buddy watch working correctly, but can't get the BLF to change based on the state... Example: When an extension is ringing, I get the same 'red light' that I get when the extension is actually in use... I was wondering if anyone had any experience with getting the Polycom phone to

Hello We have recently upgraded our internal PBX from 1.4 to 1.8. This made the BLF lamps on our Polycom phones stop working. After a lot of googling and a lot of testing, I have been unable to find a solution. I did try to change the call-limit value from 4 to 1, and this actually made BLF work (noone suggested this, and what documantation I can find states that this option is deprecated). This

I am running 1.8.3 and my BLF lights have stopped working. The hints appear to be intact when I use core show hints. But none of the phones are getting the BLF updates. This has happend in the past and I have had to restart my server. What could be causing this to occur. It did not do this with the 1.6.x builds. Is there a way to reload the hints or force a refresh without re-starting

Hello Is het possible to assign blf to a misdn channel? I want to watch the status of my external misdn channels on a linksys 962, e.g. green = available , red = in use and as an extra I want when I press the blf use the external line or when busy i want to barge in that call. Did somebody do this before?

Hello, I've seen several references in IP phones manuals to Broadsoft's BLF-List URI feature (also referred to as List-Oriented BLF). With this mechanism, a server is able to update the BLFs an IP Phone is supervising without asking the IP phone to reboot, as for a reason I don't know, most phones send BLF-related SUBSCRIBEs during boot time. Is this feature compatible with Asterisk

Mostly to debug/test BLF, is there a softphone or another app. which can subscribe to hints on Asterisk? Heck, it doesn't even need to be able to do calls :-) Leif

Hello all, Just wondering if anyone ever solved the Aastra 50-BLF limit when used with Asterisk (any flavour)? I know it's not strictly and Asterisk question - but I'm sure there's plenty of you out there using Aastra's on the end. Cheers, Andrew Thomas dCAP #1473

Hi Guys we have a system that uses a lot of custom hints based on the extension the extensions use the format of ext-system for example 200-pbx01 when starting asterisk the "core show hints" show the correct hints and blf works as expected in the extensions.conf we have _.,hint,Custom:${exten} when running dialplan reload all the hints lose the dashes (-) they become 200pbx01 of course

<!doctype html> <html> <head> <meta charset="UTF-8"> </head> <body> <div> <br> </div> <blockquote type="cite"> <div> On 6 March 2019 18:16 Kristijan Savic - ratiokontakt GmbH via dovecot < <a href="mailto:dovecot@dovecot.org">dovecot@dovecot.org</a>> wrote: