similar to: Timeout in IAX vs SIP

Ok so I've just built and installed a CVS (HEAD) version of asterisk on RHFC2 running a 2.6.13.3 kernel.org kernel. I installed the samples via "make samples". Everything seems to work except one thing. I'm trying to do the connect to the Digium IAX demo server portion of the demo (dial 500) and I just get the following messages. I am behind a NAT server and did NOT change

Hi, I am fairly new at working with Asterisk. I am having a call quality issue that I really need to get ironed out before we go to rollout the system in a week. Any help would be greatly appreciated!!! Even if it is just pointing me in the right direction. My current setup: I have Asterisk Setup on a Dell Server. It has 2 T100P cards. One will be for out T1 PRI from the Phone Company (We

On 1/2/2024 4:03 PM, thelma at sys-concept.com wrote: > I'm using asterisk-16.30.1 > > When I try to call another asterisk server over IAX I get a busy signal, > > chan_iax2.c:4739 __auto_congest: Auto-congesting call due to slow > response >     -- IAX2/192.168.143.1:4569-656 is circuit-busy > > Asterisk-16.16 is working normally, no congestion error. There is not

I'm using asterisk-16.30.1 When I try to call another asterisk server over IAX I get a busy signal, chan_iax2.c:4739 __auto_congest: Auto-congesting call due to slow response -- IAX2/192.168.143.1:4569-656 is circuit-busy Asterisk-16.16 is working normally, no congestion error. -- Thelma

> On Jan 2, 2024, at 23:17, thelma at sys-concept.com wrote: > > On 1/2/24 15:13, asterisk at phreaknet.org wrote: >>> On 1/2/2024 4:03 PM, thelma at sys-concept.com wrote: >>> I'm using asterisk-16.30.1 >>> >>> When I try to call another asterisk server over IAX I get a busy signal, >>> >>> chan_iax2.c:4739 __auto_congest:

Hey Guys, Whenever i calling any extension i am getting following WARNING messages do you have any idea they coming from where? -Satish shirley*CLI> == Using SIP RTP CoS mark 5 -- Executing [7623 at from-sip:1] Macro("SIP/7527-00000008", "stdexten,7623,sip/7623&sip/7624") in new stack -- Executing [s at macro-stdexten:1] Dial("SIP/7527-00000008",

I tried to update and build 1.4 (SVN-branch-1.4-r45775) tonight. I took the additional step of nuking my modules directory first... When I used the command asterisk -v to start asterisk, it seemed to go along and get to the point where asterisk is running(ie Asterisk Ready). At that point it was eating all available CPU. I went ahead and tried to register a softphone to it via IAX2, which

I am using Asterisk CVS from last week and have been using Realtime SIP for a couple weeks now without any problems. Yesterday I decided to turn on Realtime IAX but I am having problems dialing to my long distance providers like Voicepulse, Sixtel or Nufone. I get the following: -- Executing Dial("SIP/2001-3761", "IAX2/password@voicepulse/19566680301") in new stack

Hi.... I'm having a extrange problem.... I cant register with Iaxtel or call to digium... But i cant make or recive IAX calls... ( I made some one with irc users ) Any idea why? At my logs i have this from iaxtel: NOTICE[196621]: File chan_iax2.c, Line 2832 (register_verify): No registration for peer 'xmarts' (from 192.168.0.11) NOTICE[196621]: File chan_iax2.c, Line 4389

Hi, I'm still hassling with the consultative/attended transfer stuff. Someone please help me identify this A lot has already been said about the ATA186. Some report it works fine, others say it doesn't. Lets get clarity on this. My scenario is reasonably simple (I think) Phone A: SIP/video1 Phone B: SIP/werkkamer Phone C: IAX2/provider Phone A calls phone B, they chat: *CLI> show

I tried putting this as the ata's dailplan: *St4-|#St4-|9|^9t4>$.- this is sip.conf [ata2001] type=friend username=ata2001 secret=SoMeSeCrEt host=dynamic context=fromata canreinvite=no and this in extensions.conf [fromata] ignorepat => 9 exten => _91700NXXXXXX,1,Dial(IAX2/${IAXINFO}@iaxtel.com/${EXTEN:1}@iaxtel) exten =>

Sorry for posting this again, but it seems to have become attached to another thread. Guess I replied to another message instead of starting a new one... Hi, I'm trying to setup a call forwarding rule so that when an extention doesn't answer the call is forwarded to my mobile. I'm using voiptalk.org for incoming and outgoing calls and SIP phones for extentions (so all IP based -

I know I must be being daft, but is there a way to set which context the queuing system uses when it dials the operators/agents? By default it appears to use the default context. I've looked through voip-info.org and can't find anything, someone please put me out of my misery.

Well misery loves company but still...just truly unfathomable! Time for a change. _______________________ Sent from MzK's phone. On Sat, Aug 1, 2020, 13:04 david <david at daku.org> wrote: > At 12:50 PM 8/1/2020, Kay Schenk wrote: > >Totally and completely on my HP microfiber. Wouldn't get past anything to > >even get me into the grub menu. NOT AMUSED! > >

Hi All, I am using Asterisk 1.4.26.2 and I am getting the following problem making connections to this server. My other servers are Version 1.2.x which have no problems and this 1.4.26.2 server can call the other 1.2.x servers. The error is: chan_iax2.c:4251 handle_call_token: Call rejected, CallToken Support required. If unexpected, resolve by placing address 192.168.25.250 in the

Hi R Graphics Gurus I am unable to figure out this issues with unevaluated expressions. I'm trying to create a graphic where I calculate the residual from a regression and want to mark each residual with its observation number. So something like plot(0,0, type = "n", xlim = c(0,10)) for(i in 1:10){ text(i, 0, substitute(paste(epsilon[i]))) } except that i end up pasting

Hello, I`m trying to make a call from the snom 100( SIP mode) but whatever number I dial I get a 404 error from Asterisk. Here are my configs and a dump from "sip debug" . But if I make a call from a Zap line (see extension 2382031), it rings the snom phone sip.conf: ------------------------------------------------------------------------------ ; ; SIP Configuration for Asterisk

Hi - I'm running CVS-HEAD from 2005-08-11 20:17:17 UTC, and I'm trying to set up some redundancy on IAX connections between locations. I have two IAX peers set up that work correctly by themselves: "ast551-out" and "ast551-out-backup": [ast551-out] type=peer secret=secret username=ast551 host=X.X.X.X qualify=1000 disallow=all allow=gsm allow=ulaw trunk=no

I'm using .C() and .External() and have no problems sending integers, reals or strings from R to C. Nor do I have problems sending integers or reals back from C to R. But I'm pulling my hair out trying to set a string value in a C function and then sending it back from C to to R. I've searched the usual sources and tried various casts, macros and allocation schemes, but I'm

Hello, I'm blotting a series of growth curves into a multiplot environment created with layout(). since I want the four plots to be easily visually comparable, I do the following: #first plot plot(x,y,<stuff>) standarduser<-par()$usr ... <some fitting> ... lines(spline(x, <fitted_equation>)) #everything all right till here # second plot plot(x,y,<stuff>)