similar to: Asterisk, SpanDSP and RXFax

Hey All, I've been using Asterisk for a couple years now, but have always had some unsolvable audio problems. I get audio stuttering and popping quite often. Even if I have just one call up! The server is a Dual Duo-Core 3.0ghz Xeon Processor PC with 4 GB or ram. It just seems to me that this should NOT be happening. The server resources are nearly 98% idle. I've tried using

Hey All, Is there an app available, or another method, to stream an audio file to a caller while performing additional actions in the background? Regardless of whether DTMF is received or not from the caller. I had originally thought that I could use the "Background" app for this but after further investigation found that Background is primarily for playing audio and waiting for

Hello , Went to /etc/dovecot/dovecot.conf, hunted down "ssl_listen =" which I had set it up to "ssl_listen = required" and commented it out. Tried "service dovecot start" and it started. The USD2,000,000 question being : what does this do (I know , I know, I cannot remember, I documented all this for v1.2.14) and will I need it in the future ? THank you people,

Hello all, Can this be done ? Would setting the variable FAXRESOLUTION to a appropriate value affect this change ? > http://www.asteriskguru.com/tutorials/rxfax.html Variables connected with the application LOCALSTATIONID - used by to application to identify itself to the remote end LOCALHEADERINFO - used to generate a header line on each page REMOTESTATIONID - set by the application, the

Hi all! I built dovecot-1.2.14 on Solaris 10 with gcc as well as cc and had reproducible crashes of imap-login: Aug 31 19:00:05 dovecot: Info: Dovecot v1.2.14 starting up Aug 31 19:00:10 imap-login: Info: Login: user=<someuser>, method=PLAIN, rip=<remote_ip>, lip=<local_ip> Aug 31 19:00:10 IMAP(someuser): Error: ld.so.1: imap: fatal: libgcc_s.so.1: open failed: No such file

http://dovecot.org/releases/1.2/dovecot-1.2.14.tar.gz http://dovecot.org/releases/1.2/dovecot-1.2.14.tar.gz.sig + virtual mailboxes: Added support for IDLE notifications. - master: Don't crash on config reload when using dict processes. - IMAP: QRESYNC parameters for SELECT weren't handled correctly.

http://dovecot.org/releases/1.2/dovecot-1.2.14.tar.gz http://dovecot.org/releases/1.2/dovecot-1.2.14.tar.gz.sig + virtual mailboxes: Added support for IDLE notifications. - master: Don't crash on config reload when using dict processes. - IMAP: QRESYNC parameters for SELECT weren't handled correctly.

Hey all, Quick Question. I have heard mention that Asterisk has the capability to store voicemail inside a database, instead of storing each voicemail in a separate file under a spool directory. Is this true? If so, does it (or can it) use MySQL? Is there any documentation available showing how to do this? The problem that we are having is that we need redundant voicemail servers

Hey All, We are looking to expand our usage of Asterisk and I am trying to make as much of the configuration dynamic as I possibly can. The only part that I'm having problems with is sip.conf. I can get asterisk to register each extension with our local SER SIP proxy dynamically by using the "sipfriends" table in the database, but I'm having trouble with the message waiting

Dear Steve i have try SpanDSP from the first version to the last one (1k) with my Canon FAX and with my modem but every time i see a lot of message like this: ----- I send a Fax from my Canon B150 i have the following error: -- Starting simple switch on 'Zap/33-1' -- Executing RxFAX("Zap/33-1", "/home/user/testfax.tif") in new stack Changed from phase 0 to 1

Hi Steve, You are a legend !!! It is properly disconnecting now. Although I am having problem with the fax detection. Somehow fax will only be detected if NO CLI was sent from the PSTN line but if the line received the CLI, fax tone is ignored. Does anyone had the same experience? Is there any workaround or fixed for it? Rey > Message: 11 > From: Derek

Hey All, I've been trying to get SpanDSP / RxFAX to work in order to set up a soft-fax machine on my asterisk system. I have asterisk CVS-04/08/04-10:06:15 and spandsp 0.0.1. This is on a Fedora Core 1 with 2.4.26 kernel. I have tried to look for a newer version of the spandsp stuff, but opencall.org does not seem to exist in DNS any more. (If it's moved location, can someone please

I compiled libtiff version 3.6.1 and spandsp and spandsp version k. When trying to load asterisk I get the folloein error: Jun 7 10:15:03 WARNING[16384]: loader.c:408 load_modules: Loading module app_dtmftotext.so failed! Ouch ... error while writing audio data: : Broken pipe [root@zapata root]# Warning, flexible rate not heavily tested! Please help! -- Manuel Marin Garcia TRANSTELCO S.A.

Hello All, I have downloaded and installed spandsp and downloaded rxfax, etc and rebuilt asterisk with app_rxfax. I have added the following to my extensions.conf: [macro-faxreceive] ; ${ARG1} - sendto e-mail exten => s,1,Wait(2) exten => s,2,Answer exten => s,3,SetVar(FAXFILE=/var/spool/asterisk-fax/fax-${MACRO_EXTEN}-${TIMESTAMP}) exten => s,4,SetVar(EMAILADDR=${ARG1}) exten =>

Hello, group: I install spandsp and the respective applications in my asterisk box running Redhat 7.3. Rxfax received the fax but when I display on my application the only thing I get is a long Black line in the midle of the page like the fax is being shrink to one Black line. Has any one experience the same problem, and what should I do to fix it???.. Am using

Hi, using HFC cards, mISDN/chan_misdn and spandsp lib fax retrieval works, but some log file entries are missing. There should be one of the lines: Fax successfully received. Fax receive not successful. Dail Plan config used: [fax] exten => _.,1,SetVar(FAXFILE=.............) exten => _.,2,SetVar(LOCALSTATIONID=......) exten => _.,3,rxfax(${FAXFILE}) exten => _.,4,NoOp,XYZ exten

I've recently started playing with the RxFax application on my Asterisk box. I've had success, mostly, but I've had some failures, too... The most recent failure is specific to receiving from a particular fax machine -- a "Canon Laser Class 9000S". The TIF images received are readable, but the aspect ratio is stretched horizonatlly (or squished vertically). Is this a

Hi there, I have installed RxFAX/TxFAX with Asterisk CVS 02/16/04 and it works just fine, i installed it successfully. Now i have Asterisk CVS 10/08/04, i installed spandsp-0.0.1 with no errors. When i reinstalled asterisk i got the following error: In file included from app_rxfax.c:14: ../include/asterisk/lock.h: In function `ast_mutex_init': ../include/asterisk/lock.h:311:

Hello: I have been using the asterisk system now for almost 5 months. I'm very happy with it's performance, however I have been using the RXFAX on and off for the last month or so. I gave up after a while and just had it route to my analog fax machine in the fax context. However, I have always had the implementation that it would go to a macro.. macro-faxreceive, and to the rxfax of the

I have asterisk 1.0.7 and I made the required patch and got everything installed. I have libtiff 3.7.0, and I'm using the zaptel stuff. When I send a fax to it, it autodetects the fax and starts rxfax, however, the fax machine just sits at 1% and then disconnects. I don't have any error messages or anything. Any ideas as to why this isn't working or any suggestions for