similar to: Possibleto use zaptel 1.4 with asterisk 1.2?

I'm trying to learn to use fxotune and am getting the error: Could not fill input buffer - got -1 bytes, expected 4000 bytes Failure! when I run it. This is a new install of Asterisk 1.4 and zaptel 1.4. Also I can't really find an up to date how to on it. Am I supposed to place fxotune on my startup path and run fxotune -s once it is working correctly. Any nuggets of info are most

Hi, everyone: I am developing a system using Asterisk, TDM-400 analog cards, analog lines, and Polycom SIP phones for internal extensions. Initially there was bad echo but after a series of efforts, I've managed to reduce it to a negligible level (it only happens when both parties speak simultaneously, and even there, only for a few hundred milliseconds). From an echo standpoint, things are

I go to my Zaptel 1.4.0 folder and run ./configure; make linux26; make install and I don't see any errors. This is out of my modprobe.conf: install tor2 /sbin/modprobe --ignore-install tor2 && /sbin/ztcfg install torisa /sbin/modprobe --ignore-install torisa && /sbin/ztcfg install wcusb /sbin/modprobe --ignore-install wcusb && /sbin/ztcfg install wcfxo

Hello! I have problems compiling zaptel (tried 1.2.11, 1.2.10 and 1.4.0-beta2 -- all give the same error) with 2.6.19 kernel CC [M] /home/roman/install/asterisk/zaptel-1.4.0-beta2/xpp/card_fxo.o In file included from /home/roman/install/asterisk/zaptel-1.4.0-beta2/xpp/xpd.h:26, from /home/roman/install/asterisk/zaptel-1.4.0-beta2/xpp/card_fxo.c:28:

HiI don't have any digium cards and only want to install ztdummy with all asterisk functions. What I will need with ztdummy and what I can disable?Thanks a lotDmitri************************************ Zaptel Module Selection ************************************* Press 'h' for help.

Hi all, I'm pretty new to linux and compiling modules, but I've scoured the web for help on compiling the zaptel modules from source and I get the following error... make -C SUBDIRS=/usr/src/modules/zaptel modules make: *** SUBDIRS=/usr/src/modules/zaptel: No such file or directory. Stop. make: *** [linux26] Error 2 Any ideas? /usr/src/modules/zaptel is the dir I'm

Hello, I just made a asterisk / dahdi fresh install on Debian 8.4, and ended up with the following packages : $ sudo dpkg -l|grep -Ei 'dahdi|asterisk|libpri' ii asterisk 1:11.13.1~dfsg-2+b1 amd64 Open Source Private Branch Exchange (PBX) ii asterisk-config 1:11.13.1~dfsg-2 all Configuration

Does anyone know where I can get an rpm spec file for zaptel 1.4.x? Thanks, Doug. ____________________________________________________________________________________ Be a better sports nut! Let your teams follow you with Yahoo Mobile. Try it now. http://mobile.yahoo.com/sports;_ylt=At9_qDKvtAbMuh1G1SQtBI7ntAcJ -------------- next part -------------- An HTML attachment was

I noticed the following came into cvs head yesterday: > Update of /usr/cvsroot/zaptel > In directory mongoose.digium.com:/tmp/cvs-serv2118 > > Modified Files: > fxotune.c wctdm.c wctdm.h > Log Message: > More TDM card echo API modifications. Making the fxotune program automatically > find the correct coefficients for the module. Lots of neat stuff. I did a complete

Hello About every three months, my dad's little Asterisk server that handles his business phone line with an OpenVox PCI card stops taking calls. To check if it's the cause, I'd like to run a CRON job every night to restart Zaptel and Asterisk. Before I go ahead, I'd like to know if I can just send the following commands, or if there are issues I should know about:

Hi With an FXO module + Zaptel, I'd like to know if there are ways to know when the remote party has answered the phone, whether calling through a callfile or by sending DTMF's. I read about {CHANNEL(state), ChanIsAvail(), and ${DIALSTATUS}: Are those reliable ways to know when the channel is available for dialing out and the call has been answered?

Skipped content of type multipart/alternative

Is there a zaptel mailing list? Here's the error: CC [M] zaptel-1.4/xpp/xbus-core.o zaptel-1.4/xpp/xbus-core.c: In function ?debugfs_open?: zaptel-1.4/xpp/xbus-core.c:171: error: ?struct inode? has no member named ?u?

Well, I'm experiencing a similar problem with my setup... debian etch, asterisk 1.4.2, zaptel 1.4.1, ... I cannot find the chan_zap.so module file anywhere, tried recompiling with zaptel 1.4.0... no change... I tried 'make menuselect', and going to the channels-part, chan_zap is marked XXX -> dependencies missing: and this is the message for it, as an explanation. Zapata Telephony

Hey guys, I'm having some trouble with gain settings using a Wildcard X100P and Zaptel 1.4 Beta 2 on Asterisk 1.4 beta 3. My transmit volume between an IAX client (idefisk) and a POTS device through my 1.4 box is great, but my receive volume is terrible. I can hardly hear a word they say. I've cranked my gains up to 100, inserted the wcfxo module with boost=1, but haven't had

Hello 1. I don't have deep knowledge of either Linux or Asterisk, but I seem to have successfully installed 1.4 with Zaptel (for support for an OpenVox PCI FXO card) on a stock Ubuntu 7.04 Server Edition: ======== dmesg ========== [ 25.990943] Zapata Telephony Interface Registered on major 196 [ 25.990948] Zaptel Version: 1.4.5.1 [ 25.990950] Zaptel Echo Canceller: MG2 [ 27.523605]

Don't you just hate it when something was working and when you come to use it in anger it's broken :-( Something in the, fairly, recent series of Asterisk updates has broken DIGITAL call passthrough. I've an ISDN PBX behind my Asterisk Box (PRI ISDN comes into port 1 of a Digium Wildcard and the PBX it connected to port 2 via an ISDN crossover cable). This PBX used to be able to

I have a TDM400 with an FXS and FXO interface. I have adjusted the TX and RX gain for both the FXS and FXO channels so that everything is balanced. I hear myself very loudly with no lag. I also get alot of background noise when the bridge is formed between the FXS and FXO channels. I have read the following articles: http://www.voip-info.org/wiki/view/Asterisk+echo+cancellation

Group Having trouble installing zaptel. Below is my server specs Intel Motherboard D101GGC TE405P CentOS-4.2-i386 Here is the output trying to do a 'make' =============================================== make clean rm -f torisatool makefw tor2fw.h radfw.h rm -f ztcfg torisatool makefw ztmonitor ztspeed zttool zttest fxotune rm -f *.o ztcfg tzdriver sethdlc sethdlc-new rm -f

FYI: I am trying to build zaptel-1.2.4 against the recently updated kernel version 2.6.9-34.EL on Centos 4.2. but I am getting errors and it will not build. This is apparently due to a typo in a kernel header spinlock.h although I have not successfully modified the kernel and built zaptel against it yet. https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=180568 This bug report has a typo