similar to: Asterisk 1.2.11 - ResponseTimeout being ignored

Hello all, I have seen some chatter again about DTMF. I see most of the talk about DTMF around not being able to get an external IVR to recognize digits, not a big issue for me at this time but sill interesting. My issue though, is with talk off on a zap channel. It seems to be getting worse or maybe my patience is thinning. All my calls go out and come in pstn through an FXO as I do not

Ok asked this earlier with no response so I will phrase it a different way. I am sure someone had to deal with this and there is a "best way." I want to let Asterisk make the decision on best path based on local exchange - xxx-yyy - where xxx is one of my local area codes and xxx is exchange designator. The problem is that the list is rather large. Maybe 50-100. The idea is that I can

Being rather new to Asterisk I was wondering what the current status of AEL2 is? I see reference to it back in January but that was many versions ago. Is it in the current code? Doug **************************** * Doug Crompton * * Richboro, PA 18954 * * 215-431-6307 * * * * doug@crompton.com * * http://www.crompton.com * ****************************

Ok trying this again... is there anyone using the SPA-3000 with * ???? I am not sure if this is a specific problem to it or not. This is something I really need to fix!!! When dialing out using * interfaced to an SPA-3000, fxs,fxo, I cannot access (reliably) DTMF menus at the called party, after call completion. Dialing DTMF is fine. I checked by calling myself. Listening to either end on a

Does it matter if you use upper or lowercase rules - I.E. - "x" vs. "X" or mix them? Not that I would do that as a rule but sometimes you make mistakes! Doug **************************** * Doug Crompton * * Richboro, PA 18954 * * 215-431-6307 * * * * doug@crompton.com * * http://www.crompton.com * ****************************

If you asked this question on the biz list you would get a lot of people that will tell you that they offer services where you can set the caller ID to what ever you want. To name a few:: Nufone Teliax Voipjet ----- Original Message ----- From: "Doug Crompton" <doug@crompton.com> To: "Asterisk Users Mailing List - Non-Commercial Discussion"

Hi all, I need to simply use Asterisk to receive incoming calls in an IVR manner. It should authenticate users and read data from MySQL table that match their ID through Text-to-speech. I already have Asterisk 2.6 (Asterisk@home). I understand that I need to use Festival and AGI but do not know what to do exactly. Any help is appreciated. Thanks

Hi, I have a system that connects to the PSTN. What do I need to do so that when a call comes in, the system will start ringing the hunt group I have setup but not actually answer the call? The problem is the system is answering the call, and then passing 'ringing tones' back to the caller, so this makes the phone companies call-forward-no-answer not work since the telco thinks they

Three months ago, I was experiencing all sorts of issues with my Asterisk box maintaining a connection to multiple trunks, etc. I also experienced various timing issues as well. In addition, Asterisk would sometimes take almost a minute to fully load and register its SIP and IAX trunks. Puzzled, I recompiled several times. No result. I checked my hardware. Didn't find anything. However, I did

Hello, Before throwing in the towel with my Sipura 3000 has anyone had much success with that adapter connected to a door phone? In our setup a doorphone is connected to the SPA's fxs port. When a visitor rings, asterisk calls a group of Polycoms and the person who answers has to enter *1 to trigger the door opening. However it seems the SPA doesn't relay the DTMF's to the

Hi list, I tried to use DISA in order to get the line when I call with my mobile phone but the system doesn't recognise my DTMF tones when I call to a SIP trunk. Everything is working Ok if I use a ZAP Trunks. I tried to google to find a solution but I wasn't able to find any. Any idea? I'm using trixbox 2 with 4 SIP trunks and a Zaptel TDM 400 card. Bye

Is what I am trying to do in this context possible. That is changing the incoming CALLERIDNUM. In this case if the incoming CALLERIDNUM is not preceeded by a "1" I want to add a "1". Often calls come in without the preceeding "1" and this plays havoc with my redial if the 3 digit area code matches a local 3 digit extension. All my outside calls are 10 digits or 1+10

Hi List; My Asterisk version is 1.4 and I am trying to use the ResponseTimeOut() application to control the response time of the Background function, but when the running arrive for the ResponseTimeOut() then the call drop and my debuging says: No Application 'ResponseTimeout' for extension (Test_Bilal,s,3) Spawn extension (Test_Bilal,s,3) exited non-zero on 'Zap/1-1' Hangup

I'm experiencing a strange problem. My inbound calls are hanging up right after Background() message even though response timeout is set to 10 sec. [voicepulseincoming] exten=>_X.,1,Answer exte=>_X.,n,GotoIfTime(9:00-17:00|mon-thu|*|*?business-hours,s,1) exten=>_X.,n,GotoIfTime(9:00-15:00|fri|*|*?business-hours,s,1) exten=>_X.,n,GotoIfTime(*|*|*|*?after-business-hours,s,1)

My SIP phones can dial out through Sipura SPA3k to POTS for local and 911 calls _but_ incoming POTS calls are being swallowup somehow. Am I on the right track with the code snippit below? sip.conf: --------- In sip.conf the following code is _supposed_ to ring the SIP phones when a POTS line call comes in through Sipuara to Asterisk. [spa3k-pstn-in] ; Pots-line-in from Sipura ; If

I've been working with a telco for the past two days trying to get a PRI span up and running. This is a small-ish telco and I get the feeling they don't do this very often. Anyway, they specified a pretty standard setup: ni2 switchtype, esf framing, b8zs coding, etc. All of my b-channels are up, but we're having a heck of a time getting the d-channel to come up. He finds out that

Asterisk Users, I am thinking about selecting CALLWITHUS as my sip provider. Has anybody ever used them? How was the call quality? DTMF Tones issues? Thanks in advance. -John _________________________________________________________________ Gear up for Halo? 3 with free downloads and an exclusive offer. http://gethalo3gear.com?ocid=SeptemberWLHalo3_MSNHMTxt_1

Ok, I am back from my thanksgiving holiday, and I find there was a big snow storm here in Seattle. Apparently during the storm there where multiple brown out/black outs. I have struggled since day one to get a high quality PSTN gateway configured with my very long loop and Mac based asterisk. I originally tried the HT-488, which had multiple issues, and was unacceptable. I then purchased

At work, I have 4 branch offices at which I've deployed asterisk. Call termination/origination at each branch office is handled either through a frac PRI or 3rd party SIP provider. Soon, I'll be replacing the legacy PBX at our HQ with asterisk. Each branch office has between 3 and 20 employees, each with their own extension and DID, and at headquarters, we have about 70 people, again

Hi List; Can someone advise me why in the below context, it does not run the Background step? Once I dial 1000, then it hangup and give congestion signal? If I comment the ResponseTimeOut, then it run the Background but it does not wait till caller enter the digits, once the sound file finish, then it hangup (congestion signal), also in all the situation, it does not go for the t extension, why?