similar to: Hanging up a 3-way conference when middle user hangs up

We have working in a rural project and I have selected Asterisk. Because * will work with a prepay system we need a precise answer supervision for outgoing calls. The pilot system will have 8 trunks to PSTN. The Telephone Company provides EURO BRI and analog CO trunks. On CO trunks the answer supervision is reversal polarity. The village to be served will be connected through a WLAN. Thus,

Hi all, Muppet from the UK asking for help We are just about to have a T1 line installed in our office in Dallas and "Advantex" the supplier has sent a questionnaire asking a number of questions. I have put the question area at the bottom of the email, we will be using Digium's hardware. could anybody help :-) In the UK when I asked for a E1, number of trunks required and the

As far as I can tell, after discussing this matter with other asterisk users in my area, my telco _does_ provide disconnect supervision.. It seems that the problem is actually related to the Sangoma A200 card I'm using, as two other people both using this same card have expressed the same problem.. Are there any other users on this list using the Sangoma A200 FXO port card, and experiencing

I'm starting to shop for my first channel bank and one of the features that eveyone seems to recommend is "far end disconnect supervision". What other terms do various manufactures use to describe this same feature ? Is "calling party disconnect" the same as "far end disconnect supervision" ? Thanks

Hello everyone, I'm hoping someone can help me with this. I have a business customer in the U.S. (Michigan, AT&T Territory). I need to get 4 trunks into an asterisk Box. My intention is to use an Eicon Diva Server card with 2 BRI Circuits. The reason for this is that the business needs DID's on the trunks (20 of them). A full or fractional PRI is overboard for them, as they will

Asterisk 1.0.6-BRIstuffed-0.2.0-RC7k is installed I have a x100p card and it doesn't detect a hangup from the calling party when going in voicemail(). My PSTN provider is sending open loop disconnect (voltage decrease for a given moment of time). Actually Progress Detection is HIGHLY EXPERIMENTAL so it should not be required to fix this problem. I wonder if disconnect supervision is the

Hello Astrites, I was just about to send out a long email about not being able to detect hang-up with my CAC II FXO module on my PSTN POTS lines. I had tried many configurations. I had attached a toner to the line to see if I was getting this "disconnect supervision" signal after hang-up. (toner has a line powered light in the off position) It seemed that I was getting the signal,

Hi, I have a legacy Norstar system that I'm looking into integrating with my Asterisk setup. My first attempts have worked, which involves a Wildcard X100P FXO card in the * box connected to the Internal ATA (FXS port) on the Norstar system. Calling from SIP -> Norstar works fine, since the SIP caller initiated the call and generally will be sane enough to hangup the phone when

Hi, Just finished watching the season finale of '24' the TV series. Throughout the series they have been showcasing Cisco hardware especially Cisco IP phones (7970's). On the last episode or two they showed what seemed to me a new cisco IP video phone. It stands just as a 12" lcd screen with the cisco branding/logo and letters just as the 79xx series. I wonder if this is a

> > > > I would be grateful if anybody could tell me what I should > > tell Verizon > > in NJ so they would enable "disconnect supervision" for my lines. > > > > Apparently "remote hangup notification" or "disconnect > supervision" or > > "calling party control" is NOT the magic phrase for them. Although >

so i have been running v1-0 on all of my test boxes for about a month now testing iax/sip/res_xxx. I decided to put it into production so I updated a box that was running 0.9.? that had been working perfectly for months and low and behold the inbound line from telco now intermittantly doesn't clear and none of the other channels can dial out on that line. I have tested the line in this

Hi, Reporting from Astricon, Mark uploaded the 1.0 release while giving his speech a few mintues ago.. Bring out the champagne :) Lethol

Package: xen-utils-3.0 Version: 3.0.2+hg9697-2 Severity: wishlist Hi, it would be nice to run xend under the supervision of runit. xenconsoled and xenstored already provide relevant switches (-i and --no-fork). Thanks Andras -- Andras Korn <korn at chardonnay.math.bme.hu> <http://chardonnay.math.bme.hu/~korn/> QOTD: Paranoid: someone

Hey all, anyone know the status of disconnect supervision on POTS lines in India? Set up an asterisk box, TDM cards, in Mumbai, and doesn't seem to have disconnect supervision...... Thanks -- Chris Earle System Solutions Specialist

Hello, I'm trying to run mailfront SMTP (http://untroubled.org/mailfront/) under Dovecot 2.x process/service supervision My intention was to utilize the fact that dovecot2.x seems to have some kind of generic process/service supervision as well as builtin ssl support. But I cannot get the most simple generic service setup (without ssl) to work. Currently running dovecot 2.0.11 on FreeBSD

Anyone tried this, I put in an Asterisk/FreePBX phone system to replace one of those el cheapo Bizfon analog key systems. The Bizfon was able to do follow me to analog lines but I do not believe the capability is in Asterisk. Of course now it becomes the one feature they cannot do without. Somehow the Bizfon is able to detect if an analog line is answered (without answer supervision). If not

I was playing around with conferencing tonight. I was able to place a bunch of SIP phones and a couple of my Zap FXS phones into a conference. So I thought, "Let's see what it's like when people come in from outside." So I called a friend and had him call in on one of my Zap channels, WHICH IS CONNECTED TO MY POTS LINE THAT DOESN'T DO DISCONNECT SUPERVISION. When he

Thanks for the reply. Forgive me for being na?ve, however have jumped in to this asterisk project at work due to some circumstances beyond my control and I don't know a lot about carriers and how this all works. I am figuring it out, but it's a lot of trial by fire. As far as I know, we only use 1 carrier for our system. We have a PRI from NuVox and we use 7 channels for our asterisk

Ok so this is officially driving me crazy. I have an Asterisk 1.6.1.6 install with DAHDI/DAHDI tools (latest) and an OpenVOX TDM400 card with 1 FXO port and 1 FXS port. I have a POTS line from my phone company attached to the POTS line. I have asked for "disconnect supervision" to be provisioned on my line and they claim to have added it. However, my scenario is as follows: I receive a

This is Hide. This is the first contribution. I'd like to configure cluster file system by OCFS2. The number of nodes are two. CompactFlash card(CF) is used as shared DISK. Guarantees of the writing frequency to CF are up to 100,000 times. However, it exceed in two day, due to the disk_heart_beat executed every two seconds. I tried following procedures to solve that. It seems solved. 1.