similar to: problems using the 1.4 version of meetme

Hello, Is there a way to change the format from the default? 'r' - Record conference (records as ${MEETME_RECORDINGFILE} using format ${MEETME_RECORDINGFORMAT}). Default filename is meetme-conf-rec-${CONFNO}-${UNIQUEID} and the default format is wav. - requires chan_zap.so Many thanks ******************************************************************** This email and any attachments

Hello List, I have seen from the following link that, for SIP channels there is no audio communication possible in MeetMe with AGI_BACKGROUND. http://www.voip-info.org/wiki/view/Asterisk+cmd+MeetMe Currently we are using asterisk-1.6.2 and the problem still persists. Is there any solution available to overcome this problem? According to our requirement, we have to run an AGI script in MeetMe.

Has anyone here done any work on clustering Meetme conferences over multiple Asterisk boxes? The scenario I am thinking of is where there are two or more boxes connected to a set of PRIs that all answer to the same PSTN number, and where it's not possible to know in advance on which box a call would arrive. So it would be possible to have some calls on one box and some on another, that should

Hi Peoples I am having problems with meetme, in that it responds with "conf-invalid" when I dial a conference number. I notice that there is a note with regards to ztdummy, and the need for that to be loaded. Is this still the case? Is meetme dependent on this module? I do NOT use zaptel cards in my system, and there for zaptel is not loading. Can anyone shed some light

On Wed, 25 Mar 2020 12:42:00 -0400, Doug Lytle wrote: > > > >>> he problem is that there is some sort of distortion in the audio > > Has been been going on for a while or is this a new setup? Do you have a timing source? > > I bit the bullet around a year ago and moved to CONFBRIDGE; it wasn't as horrible as I thought it would be to setup. Well, this has

Hi All! I am facing some delay in conferencing. Using DIAX for Voip calls ,no hardware used yet I am using MeetMe to achieve conferencing and am having a lot of delays. Can anyone tell me how to reduce the delay Regards, Amna Saleem -------------- next part -------------- An HTML attachment was scrubbed... URL:

Thanks a lot Tony and Dhaval for your much appreciable suggestions. Regards, Rajib Rajib Deka SIEMENS Ltd. Robert V Chandran Tower, First Floor, West Wing, #149, Velechery Tambaram Main Road, Pallikaranai, Chennai-100, INDIA. www.siemens.com Mob: +91-9176780669 | E-Mail: rajib.deka at siemens.com Date: Wed, 20 Apr 2011 13:55:25 +0530 From: DHAVAL INDRODIYA <dhaval.it01034 at gmail.com>

I have today reported a bug with the latest channel.c (1.134) that affects music-on-hold for the first user in a MeetMe room when calling from a Grandstream BT102. The music is broken up about 5-10 times a second. It doesn't happen when calling from Firefly. It is also fine on both clients with 1.133 of channel.c. I am using the ALAW codec. Mark at Digium can't reproduce the problem,

Hi there I am using IAX2 softphones dialing into meetme conferences. I also have jitterbuffer=yes, with typical jitterbuffer settings. The problem I am having is that as soon as there is a delay from a participant, then the delay continues until the participant hangs up and dials in again. When dialing in again the delay seems to go. It seems to me as though as soon as the server registers

Just a trivial question: was the term "Meetme" invented for Asterisk as something like a brand name for its conferencing? Or was it an existing generic term for dial-in conferencing? Cheers Tony -- Tony Mountifield Work: tony@softins.co.uk - http://www.softins.co.uk Play: tony@mountifield.org - http://tony.mountifield.org

One of the features that I thought would be popular with the Web-MeetMe suite is the ability to start all non-admin callers in a muted state and selectively unmute them. For example any large conference that is of an announcment nature with a Q&A session. It's probably a feature I should have tested better, but I just discovered that a caller that is joined to a MeetMe with the |m flag

Hi All, I'm still having trouble trying to figure out if it is possible to define (in the dial plan) a context for meetme? I'm using 1.4.4 with dialplan logic of: exten => 123,1,Meetme(,Msa,) This defaults to conferences defined within the rooms context of meetme.conf Is it possible to specify another context as with voicemail? Or can any one think of another

I am reading comments on the Wiki for meetme http://www.voip-info.org/wiki-Asterisk+cmd+MeetMe from 2004 about how and AGI does work with non zap channels. Is this still valid 3 years later and 1.4.4? How do I bring people into a meetme and play a message to all of them when they are on SIP channels? Jerry

has anyone done caller announce in MeetMe's before? Dave P >>> brian@bkw.org 5/18/2004 5:50:49 PM >>> With multiple parking lots you can give each person their own lot thus exten 800 for everyone will connect them with just their call passing the lot name which you know for X customer. bkw ----- Original Message ----- From: "Andrew Kohlsmith"

hi all, is there a kind of application can let asterisk call out fellows, and invite them to come to join the meetme. these fellows do not need to call in asterisk , just wait for a call. 3x welemon

On Thu, 26 Mar 2020 06:54:37 -0400, Doug Lytle wrote: > > >>> I never moved to confbridge because they don't have an option for controlling the volume of other > >>> participants audio > > I have menu options in my confbridge configs that has increase and decrease conference volume. > > I'd still configure a small confbridge and test if you still

Hi. I have a problem with my audio in meetme conference under asterisk 13 using Debian buster compiled from source. The problem is that there is some sort of distortion in the audio -- a workaround is always to lower the listen volume (*4). I see nothing in the log and so I wonder what is happening. I have dahdi loaded so I can record the conferences. Thanks in advance for any suggestions and

Hi there, I know this question is kind of stupid. But, I don't know anywhere else to ask. I've received some answers when I asked about the need of having a zaptel interface to make the meetme application work, that said that it was better to have a real hardware then the zaptelrtc software modules. So, my question is, would any of the following cards work with the meetme

I am playing around with dynamic meetme conferences, and wanted to have one person constantly in the conference, with calls "popping in and out". Is there an option / any way of playing enter / leave sounds to the person who created the conference only, and not the people leaving / joining ? TIA Julian.

Hi, If there are 5 asterisk servers on the local net and each server runs meetme, eg. 3311,3321,3331,3341,3351 respectively. Can I connect these 5 meetme conferences to one meetme using IAX2? Regards, Zen