similar to: MWI, Realtime SIP, Voicemail and Extensions, UAs registered with SER

Hi, we a have a SER (OpenSER) in front of 2 real-time Asterisk. SER simply forward SIP messages to 1 of the Asterisks: UA --> SER --> Asterisk We have a problem with REGISTERs: Asterisk answers with 200 OK, but changes the Contact header, inserting the IP of SER instead of the original IP (the IP of the UA). It seems that performs a sort of NAT-traversal, but all the elements are on

Trying to find a solution to a sticky problem here. We have 3 OpenSER systems. Phones register with the OpenSER systems, and after they authenticate the user, pass the registration info using OpenSER's send() command to all Asterisk boxes sitting behind them. Each asterisk system then knows about every phone. For this to work, I had to turn off authentication in Asterisk for both

Hi! Meanwhile also the location is fixed: it is happening at metalab (http://metalab.at/) - a place for geeks. Thus, we meet there at Thursday, 20.9.2007, 19:00 CEST (=local Vienna time). Metalab is located next to the city hall: http://metalab.at/wiki/Lage Metalab is no pub/restaurant. Thus, don't come hungry! Nevertheless liquid food (drinks) is available. We meet in the library (in

Hi, Please help me understand the following applications and what are its advantages if we compare between each of them. Asterisk, FreeSWITCH, TrixBox, SER, OpenSER, sipX, CallWeaver, and YATE. Regards, Kaushal -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20120103/ffad2be6/attachment.htm>

One of the above is frequently used to front-end Asterisk. I used OpenSER to front-end a farm of Asterisk servers and was very happy with it. The ability to take a box out of service or to route a specific DNIS to a box for testing rocks. Since OpenSER has died (I don't care about the politics/personalities/trademarks), Kamailio and OpenSIPS have risen from the ashes. What are you using?

Hi, I need some help, getting to work asterisk MWI. I set up Asterisk as voicemail server for Openser as this tutorial shows : http://www.voip-info.org/wiki/view/Realtime+Integration+Of+Asterisk+1.4+With+OpenSER+1.3 . My voicemail system is working but, I can't get to work the message waiting indicator. It doesn't seems to send the Asterisk any NOTIFY message to the Openser box. How can I

Here's a link to it: http://forums.digium.com/viewtopic.php?t=4363&highlight= Regards, Scott -----Original Message----- From: Scott Keagy Sent: Monday, December 04, 2006 5:05 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: RE: [asterisk-users] mwi for voicemail not showing up for realtimeconfig. A while back I posted a fully functional though somewhat elaborate

HI, I'm not able to find some good doc or manual regarding Integration of Asterisk with SER. Bacially, I want to forward my calls from SER to asterisk. If some one already done this please guide me. thanks in advance arun -------------- next part -------------- An HTML attachment was scrubbed... URL:

Sorry if this hit the list twice, sent out yesterday, but didn't see it show up. Hi All, Can Asterisk be used as a SIP proxy, blah, blah, blah??? I've glanced over questions like this through the years, with a good idea on what a SIP proxy is and what Asterisk is and IS NOT. I never really took the time to lab-up SER and test drive it to see what advantages might be gained from using

What's wrong with ARA (asterisk realtime architecture) from voip-info: Asterisk, SER and MWI http://mail.iptel.org/pipermail/serusers/2004-December/013727.html Actually I wrote a patch for this and it supports ast_data too. What you do is tell asterisk that all of your phones IP addresses are your SER machine. Then when a message gets left Asterisk sends the NOTIFY to username at

While reading about how to maximize capabilities in asterisk i have read about SER and OpenSER. The sites do not explain to newbies (maybe that's on purpose) what are the benefits of using those products tied with asterisk (or is SER an asterisk replacement??) Can someone give me an idea of what's the usage for open(ser) and asterisk? is it for scalability? should I run it in the same

Hi Friends, I want to setup multiple SIP accounts. How can I do this? I have installed Asterisk, created Asterisk SIP extensions and registered in www.sipgate.co.uk. Now, what I have to do? 1) Am I need to install SER or OpenSER in my server along with Asterisk? 2) If yes, can you please recommond SER or OpenSER? 3) I searched in Internet. But, I didn't find good tutorial for this. Can you

Greetings, As a developer and consultant who spends considerable time on projects involving the fusion of Asterisk and products derived from the SER ecosystem (OpenSER, Kamailio, OpenSIPS, the new SIP-Router), I have found that there is a great volume of interest in this topic on the mailing lists associated with all communities involved, but a comparative lack of focus that results in

I am running Asterisk and would like to add SER to register my (sip) DID and connect it to asterisk; but I'm not sure if this is the correct forum. I have as DID, sip account with one VoIP provider; currently I"m using just stand alone SIP phone and register with the VoIP provider via: stun.fwdnet.net Is it possible to use SER to register with the provider and forward the call

http://vuc.me Kamailio, Open SER and Asterisk walk into a bar... The bartender is Alex Balashov, someone whose posts I have long admired on this list. Alex has agreed to take us through the following areas: - Relationship of Kamailio to OpenSER project history. - What is Kamailio/OpenSER? - SIP proxy - SIP server (for certain purposes, such as registrar, presence user agent, etc.) -

hello, can anybody help me with folloving problem I have asterisk with the public IP and two UAs (snom100, x-lite) in the same private network behind the same FW/NAT. All is working good, but whan I tried to establish call between these two UAs, first 10-15 second is nothing to hear and then is the quality terrible :( Can anyone tell how to get it work with normal quality ? best regards

Hi all This question is not connected directly wiht Asterisk but I didn't find another place. Sorry, I would like to determine state of UA ( DND, forward calls turned on my remote sip phones.) Which tools should I use ? sipsak ? maybe something else. When I send options method to remote sip phones I always receive SIP/2.0 200 OK response regardless of activated call features (DND, forward)

I am curious if it is advisable to use implement Asterisk as a Session Border Controller for a VoIP reseller environment. Users will terminate calls SIP to my server, which will authenticate them via RADIUS, perform a LCR lookup, select an appropriate trunk (based on LCR), and terminate the call (update RADIUS accounting at end of call). All while acting as a B2BUA to prevent the users from seeing

I'm reading some information that recommends using SER / OpenSER for large installation to offload SIP traffic from the Asterisk server. http://www.voip-info.org/wiki/view/Asterisk+at+large However, it looks like the information might be dated. I'm looking at a potential 750 SIP phone and 150 Analog installation, all internal network, PRI trunks, and am trying to nail down an

I have my peers registered to SER.asterisk seems to be sending mwi for the peers seen in the sip show peers CLI command. i have my ser server registered with asterisk as a type=friend and all clients register to ser.how do i get mwi to work for these clients registered to SER. Thank you, -AA