similar to: GXP2000, Linksys RV082 Firewall / NAT, Registrations

Hi all gusy, i have a big problem with gxp2000 and asterisk 1.0.9 The phones after a few go in "busy" state, if you call it get the busy tone but the phone can male any type of call. This is my sip.conf [502] language = it username = 502 secret = <password> host = dynamic type = friend context = local canreinvite = yes dtmfmode = info callgroup = 1 pickupgroup = 1 callerid = 502

I just downloaded the zip file from grandstreams website to upgrade my gxp2000 firmware from 1.0.0.3 to the latest but seems there are some files missing on the zip file... Anybody been able to upgrade their firmware? My website shows this files as missing: 201.133.125.152 - - [11/May/2005:16:47:16 -0500] "GET /firmware/ring1.bin HTTP/1.0" 200 12737 "-" "Grandstream

I have 20-30 GXP2000's connected to * over a T1 line. Neither end is NAT'd and there is plenty of bandwidth available over the line. The GXP's are 1.1.5.15, which is the latest. I have a problem where the phones keep dropping off of * and I get a "failed to register" message in the log of *. Sometimes they eventually connect and sometimes, I have to reboot them to

Asterisk 1.0.7 Has anyone got the hint function working, and maybe with the GXP2000. I am testing with 2 GXP2000 phones (firmware 1.0.1.9) at the moment trying to get the LED's to light up. On ext 690, button 1 is setup for ext 691, I did this using both methods 691, and <sip:691@192.168.69.1> On ext 691, button 1 is setup for ext 690, I did this using both methods 690, and

I've tried to use a Cisco power injector to supply power over Ethernet to a GXP2000 phone without success. Although when I plugged these phone to a PoE capable Cisco Switch it worked without a problem! Knowing that all these three equipments implement IEEE 802.3af protocol, why doesn't it work with the Cisco power injector? Anyone also had this problem before? Thanks, Ricardo Carvalho.

1. We just dial the extension directly and have speed dials setup for the first 6 parked positions. We don't use *8 at all. 2. Change the config on the phones under Account to "Send DTMF via RTP (RFC2833)" -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Noc Phibee Sent: Thursday, February 08,

All, I have AAH 1.0 installed using Digium TDM04B and Grandstream GXP2000 phones. All seems well other than the phones have to be reset up to 5 times per day. It is like they lose thier ip connection or maybe thier SIP connection. Has anyone else experienced this issue? I have the phones set for static IP addresses and that doesnt seem to help either. Any help would be greatly

We are doing a medium sized office in NYC with 80 phones. The customer originally requested Polycom 601 phones. The COO also authorized us to purchase 2 Grandstream GXP2000 phones for the mail room. We find these phones much easier to configure and work with asterisk . They support BLF & intercom right out of the box. They can also be centrally managed and provisioned. They also sound great

Hi I have a grandstream gxp-2000 and trying it on an asterisk 1.6. When I call internally between extensions I can hear the other person in the gxp2000, but when I call externally from the gxp I can't hear the person on the other end, but he can hear me. How do you configure the grandstream 2000 to work on asterisk 1.6? Regards /ralf ________________________________________________ Ralf

I am looking to setup paging using the auto answer feature on the Grandstream GXP2000. I am thinking I will follow the method as described here: http://www.voip-info.org/wiki/index.php?page=Asterisk+cmd+page I will setup the 4th account on the phone to auto answer. Does anyone else have a method that works better? I also looked at the allpage AGI written on Voip-Info. But it seems

I am trying to set up the BLF on a GXP2000. Currently what I have is extensions.conf: [globals] polycom430=SIP/101 [internal] exten => 101,1,Macro(voicemail,${polycom430}) [macro-voicemail] exten => s,1,Dial(${ARG1},10,tT) exten => s,2,VoiceMail(u${MACRO_EXTEN}@default ) exten => s,102,VoiceMail(b${MACRO_EXTEN}@default) [ext-local-custom] exten => 101,hint,${polycom430}

Hi i use a lot of Grandstream GXP2000 with BLF How to set up on the same key BLF blinking call interception? So that someone is able to take a call that is destinated to another user phone Thanks bye

Hi i have two problems with my Grandstream GXP2000 : 1- When i wan pickup a call, that's don't work's (*8EXTEN) and when i test whit Softphone, i have a error too, he say me *8201@MyContext not found .. in features.conf, i have: [general] parkext => 700 parkpos => 701-720 context => parkedcalls

Hi, what's thereal use of cfg.txt file during Grandstream GXP2000 provisioning? Thanks -- Domenico Viggiani

Does anybody have a good link how to connect Sipura with Asteriks, both behind NAT? I'm using FWD but their connection is like a weather (especially IAX), I need something more reliable. I was thinking of using stun and/or proxy but can not find any good link explaining how to setup Linux server -- #Joseph

Sorry if you see this message repeated twice. I would like to set up hard phones and softphones with the same extension so that when anybody in the company dials an extension, each user's hardphone and softphone will ring at the same time. I've tried setting this up before, but I noticed that the last sip device to register with the same extension is the only one that rings when the

Version - Asterisk SVN-trunk-r12793M (1.2.4) I have 4 Grandstream GXP 2000 phones configured. However at the moment, I have had to disable BLF, Hints, and Call Limiting due to an extremely annoying bug which seems to make the phones channels "lock" in busy after a call has been hungup. If I do a show hints after say extension 200 has hung up I get the following -= Registered

One of our clients is using a Grandstream GXP2000 with an attendant console. We have used the same phone with past clients successfully however this particular operator processes around 200 calls a hours and the GXP2000 for sure does not like the quick line shuffling and call volume. We get the following problems randomly: 1. menu stops working 2. transfer key stops working 3. Line 1 LED gets

I've got my asterisk server in the DMZ of my local LAN - I've used my Budgetone and GXP2000's from the Internet- on direct IP connections with no problems. However, I'm about to deploy about 5 phones (either budgetone or GXP2000's) all on a LAN behind a NAT- on a different network than the Asterisk server. Should I look into using STUN servers? Will this setup be a

Hi, I've had a bit of a problem with one way audio, and it happens exactly when I believe it shouldn't (and works perfectly when I would guess I could have issues. Setup: GrandStream GXP2000-------Linksys Router-----------Internet------Asterisk box (hosted somewhere, fixed IP, no NAT) ----------- VoIP provider -------PSTN When a call comes in from the PSTN, the call goes all the way