similar to: Cisco Call Manager 4.0 to Asterisk, Anyone have SIP Reinvite working?

I have experience problems like this in a different scenario. It is usually due to codec translation problem. What is the default codec set on CCM for the IP Phone and the default set in Asterisk? Make sure the defaults are the same. Try G.711 Michael

Some of you may remember back in May the thread on using Asterisk as a voicemail server for a Cisco Callmanager system. My own Callmanager system is integrated into an Asterisk server for voicemail (and other things). Back in May I was using H323 for integration, but since I've upgraded to CCM 4.1 I have switched over to SIP. The integration with H323 required using Call forwarding to send

Hi All, We are using asterisk 16.5 and having an issue with the first re-invite after the call has been established. We can see the call gets up and you see in the logs the bridge type has changed and after that a re-invite is triggered. Is there any possibility to deactivate this kind of reInvite? We have some race conditions while have multiple asterisk in the call flow and the different

Hi, I just ran into what seems to be an issue on re-invites. I'm not sure if it's a bug or as designed, so I thought I'd ask the question. Here's my setup: - Asterisk 1.8.13.0 - Phone A: Polycom ip331, only allowed to use ulaw, canreinvite=yes - Phone B: Polycom ip330, only allowed to use alaw, canreinvite=yes Phone A calls the extension of phone B. After the normal call setup

Hi all, So the scenario is: A -> Asterisk -> B after B send back 200 OK Asterisk is answering the call to A. Directly after the Answer Asterisk generates a ReInvite to A and the only difference between the 200 OK sdp and the reInvite sdp are the offered codecs which are forwarded from B to A. Here i do not understand why this could not be done in the 200OK to A? As far as i understood

Hi All, I'm having a really weird can reinvite issue. I've been banging my head around on this for days now.. I have two asterisk servers. One at 172.20.0.11 One at 172.20.2.5 172.20.0.11 is a hosted box and serves multiple offices 172.20.2.5 is a box on site at a customer's office. A phone at 172.20.128.10 makes a call using server 172.20.0.11 to a phone at 172.20.2.80 via server

Hello, I have Cisco CallManager 3.3.4 and Asterisk@Home latest version. I have earlier tried getting Asterisk to register with CCM via H323 and failed. Back then, I learned that this is a known bug in Asterisk. Also people who tried doing that had also succeeded in getting calls to go through only one direction like from CCM to Asterisk. I am not that expert so excuse my ignorance with this

Hi Siggi, > > 7960 and then "Call Ended" on the Display (curious about that !!!). > > That seems to be normal for the 7920. I've sniffed the registration > procedure with Cisco's newest 3.3(3) CallManager (+patches), and it's > doing the same thing. Maybe that's some odd way of testing if the > CallManager ("CCM") really works... >

On Wed, 23 Jul 2003, Yifang Dai wrote: > I wish! My company just spend a lot $$ on the shinny CCM phone system, so I > don't think I can change that easily... But if I can get asterisk to > talk to CCM via h323, and prove it's usefulness, I might have a chance > to use * in the branches... Well, good luck, then! > By the way, do you know if we can get *'s VM to

Hi My call flow is T38 static IP gateway --> Asterisk --> Sip Provider--> PSTN Call is placed in reverse direction - from PSTN to T38 Gateway. T38 GW reinvites with T38, and asterisk passes it along to the SIP provider. The SIP provider challenges it and asterisk reponds to the Challenge with INVITE with Auth credentials...however, the Asterisk changes the SDP and replaces the T38

Here is the setup: Phone A (in NYC) on own bandwidth. Phone B (in LA) on own bandwidth. Asterisk box in Houston,TX on own bandwidth. Both phones contact asterisk to register. Not much bandwidth used for this as it is a few packets every hour or so. Phone A calls Phone B. Phone A sends a call request to asterisk and asterisk calls phone B. Both phones are connected and both people are talking.

Hello, I know there's a problem with Asterisk at the moment in that while it's easy for one caller to dial another (using the dial command), it's tricky to connect two calls that are already in progress. I've been using MeetMe to achieve this (with each caller's call being directed to a dynamically created conference room programatically), and this is working - kind of -

It can be done. 1. Setup a new Vm profile on CCM with a mask of XXXX 2. Setup a CTI route point: a. Set the directory number to a pattern. I use *27XX but any pattern that you can send from * is good, ie. 88XXX b. Set the VM profile to the newly created profile c. Set the line to forward all calls to VM 3. Change the dialplan in * to append the extension called to the

Hi All, I have a lab setup with two asterisk servers and a MAX TNT in the middle like this: asterisk sip >< sip TNT pri >< pri asterisk The TNT is running 11.0.6 and the asterisk servers are running 1.2.9.1. I can get calls to pass from asterisk sip to tnt to pri to asterisk but not the other way. The call from asterisk to pri to tnt is good, the TNT is passing SIP invite to the

Hi, I'm trying to connect Asterisk 1.4 and Cisco CallManager 5 using SIP Trunk without MTP (media termination point). Howerver, Cisco 79xx phones do not support RFC2833, they always notify CCM5 via SKINNY channel no matter where they send RTP to. For non-MTP trunk there's Out-of-band DTMF support in CCM5 called "kpml". I wonder if Asterisk can support it. I found an

I've an Asterisk server running in my office, which forwards all long distance calls to a third party SIP service using an extension rule: exten => _1XX0.,1,Dial(SIP/{EXTEN:4}@external_sip_server.com) (1XX0 is the international calls rule for Chile) Also, in my sip.conf, I've defined canreinvite=yes to decrease the network load to the server caused by the RTP. However, the external

Hi! I'm trying to communicate a Cisco CCM 4.0 with Asterisk 1.2.11, I 've followed the info in http://www.voip-info.org/tiki-index.php?page=Asterisk+Cisco+CallManager+Integration but still not able to make Asterisk communicate with Cisco. I keep on receiving --- SIP/2.0 400 Bad Request - 'Malformed/Missing URL' --- and --- SIP/2.0 404 Not Found --- messages

Hello! I'm facing ReInvites as caller from UAS despite configured session-timers=refuse (which can be seen in the SIP trace) always after 900s. (The behavior is the same if session-timers is set to accept). This just happens with one provider (German Telekom to callee at kabelbw). - The incoming ReInvite is answered immediately by asterisk (Status 100 / Status 200 - 0.02s). Media stream

Hi All, Just wanted to share a story: We turned up a new customer yesterday evening, typical situation, Cisco 2600 Router with T1 PRI card pointed to the customer's analog PBX with 2 data T1's linked back to our network. The router PRI was configured as a gateway on our CCM 4, like we've done numerous times in the past. The customer needed LD Authorization codes enabled, got

Has anybody successfully (or I guess unsuccessfully for that matter) implemented Cisco Call Manager and used an * box for voicemail? I checked the wiki and google and I see some references to Call Manager Express and *, but CME is completely different than CM. If anybody has done this or has any insight, it would be appeciated. We are trying to migrate ~ 300 users off of Cisco Unity and