similar to: Page + ParkAndAnnounce

Hi everybody. It is possible to announce the parking position through a paging to a group of extensions? I would like that when someone parks a call, some phones will announce with the speaker the position. Something like: exten => s,1,ParkAndAnnounce(call-parked-at:PARKED|30|PAGE(LOCAL/PAGEyyyy@custom-auto page&LOCAL/PAGEzzzz@custom-autopage|) Is there a way, maybe with a

I have been testing * with some Cisco 7912G's, in hope to trash our Nortel system. One feature our Nortel system has that I will need to fiqure out on the * system is paging. Is it possible to page a group of phones (all phones) with announcements? We are a k-12 school and we use our current phone system to make announcements on the phones monitor speaker. Any direction I can be pointed in

I am looking to setup paging using the auto answer feature on the Grandstream GXP2000. I am thinking I will follow the method as described here: http://www.voip-info.org/wiki/index.php?page=Asterisk+cmd+page I will setup the 4th account on the phone to auto answer. Does anyone else have a method that works better? I also looked at the allpage AGI written on Voip-Info. But it seems

Has anyone else had problems with the Page() application not working under Asterisk 1.2.3? We use Cisco 7960 phones and set one of the lines to auto answer. When someone dials the paging extension it calls the page app and invites all the lines on the phones that are set to auto answer into a meetme conference where all the members are muted except the original caller. When I try to use the

I'm using a mix of Cisco 7960, Linksys SPA-942, Cisco 7961, Cisco 7970 phones in a paging group. I have all the phones set up with an extra line that auto answers the dial from my paging extension when the primary line is not in use. All of these are operating correctly however the 7961/7970s all ring once and then auto answer so the person paging all the phones has the first part of his

Hi, the following from extension.conf does not work correctly: exten => 301, 1, Dial(SIP/455&SIP/456, 15) That is the console output: -- Executing Dial("mISDN/1/105", "SIP/455&SIP/456&SIP/456| 10") in new stack -- Called 455 -- Called 456 -- SIP/455-46a8 is ringing == Spawn extension (incoming, 301, 1) exited non-zero on

Hi All, When a call comes into my FXO port (Zap/1), it goes into the ParkAndAnnounce app and gets parked. This is OK. Then the app announces the file I selected through the (Console/dsp). This is OK. If I go to another extension FXS (Zap/2) and dial the parked call, then I get connected OK (Zap/2 & Zap/1). The problem is the Announcement through the (Console/dsp) doesn't stop, it

Hi everyone I'm very, very, very, ... very new to Asterisk and I need some help with the ParkAndAnnounce command. Here's what I would like to do. I would like to specify an extension in the extension.conf file which is using the ParkAndAnnouce command (something like this) exten => 200,1,Answer exten => 200,2,ParkAndAnnounce(PARKED|60|SIP/${EXTEN}|some_context,${EXTEN},1)

Hi everyone I'm very, very, very, ... very new to Asterisk and I need some help with the ParkAndAnnounce command. Here's what I would like to do. I would like to specify an extension in the extension.conf file which is using the ParkAndAnnouce command (something like this) exten => 200,1,Answer exten => 200,2,ParkAndAnnounce(PARKED|60|SIP/${EXTEN}|some_context,${EXTEN},1) exten

Hi Guys, I've been trying to get this application to work but I'm getting inconsistent results. My music on hold works fine by itself, I can park calls all day, works every time. I can dial the Console/dsp all day by itself and it works every time, sounds great, even play announcement gsm recording through the console, it just works. When I invoke the parkandannounce app, the

I have ParkAndAnnounce set up to call my cell instead of Console/DSP and this works fine. If a caller tries to get me on my cell, they are parked... I am called and told where they are holding, but then ParkAndAnnounce hangs up. So I have to call my system back and dial the parked extension to be bridged with the caller. Is there anyway to make the announce jumpto something else so I can just

I have an office up and running with 40 SIP handsets. Currently when an incoming call is parked, they then dial ext 9876 which I have setup to do a page (it does this through an agi script that uses the Polycom autoanswer to page via the phones). What I would like to be able to do is transfer the call to a new extension #699 for example, and have that park the call and then connect the

In theory ParkAndAnnounce has a lot of usefulness, however, that we've had very little success with application... Our application is similiar to the local Walgreens pharmacy.. Dr. Calls in, selects the "Im a doctor with a prescription option"... call is parked, and announcement overhead is given.. "Doctor holding on ${EXTEN}" exten =>

Regarding my earlier email (for some reason, I don't get my own emails from the list), I looked at the code and although I'm no programmer, I see that this is meant to hangup after the announcement. If I comment that line out, the call remains on the line, but I'm in limbo. I tried to add a chan->priority = 101 in place of the hangup and get this on the cli: = Spawn extension

Hello everybody I'm trying to enable the Digium res_fax app at my *11.7 Server. a fax show stats comes up with FAX Statistics: --------------- Current Sessions : 0 Reserved Sessions : 0 Transmit Attempts : 0 Receive Attempts : 1 Completed FAXes : 1 Failed FAXes : 1 Digium G.711 Licensed Channels : 1 Max Concurrent : 0 Success : 0 Switched to

Perhaps I've got the whole concept wrong, but here goes: Using 1.4, when someone from the outside dials my direct line (123456), I want it to call my extension at work (SIP/456), my extension in my home office (vpn connection to corporate lan, SIP/678) and my mobile (654321). So my dialplan is thus: exten => 123456,1,Dial(SIP/456&SIP/678&Zap/G3c/07803654321,30) exten =>

Hi *, I hope this is not a FAQ, but I couldn't find any solution until now. I need to set an escape character to stop digits timeout to let phone calls start immediately. Something like '*'. I saw that in many SIP phones it is possible to set timeout and escape character and the most have a "send" button. But in an analog phone connected to a Digium TDM?

All: Some of the people who dial into to our system will press the pound key when entering an extension for the directory key. When waitexten gets that, I get an error messages as, for example 123# doesn't match any extension. I was going to use ${EXTEN} to just use the first three numbers, but I'm not sure how to use this with WaitExten. so I have exten =>

The Wine maintenance release 1.4.1 is now available. What's new in this release (see below for details): - Translation updates. - Various bug fixes. The source is available from the following locations: http://prdownloads.sourceforge.net/wine/wine-1.4.1.tar.bz2 http://mirrors.ibiblio.org/wine/source/1.4/wine-1.4.1.tar.bz2 Binary packages for various distributions will be available

The Wine development release 1.5.0 is now available. What's new in this release (see below for details): - New version of the Gecko engine. - Partial support for using the Trash on Mac OS X. - Support for path gradients in GdiPlus. - Various MSXML improvements. - Fixes to 64-bit exception handling. - Various bug fixes. The source is available from the following locations: