similar to: Power requirements on the TDM-400 card

I just received two TDM400P cards, but I'm having problems with them. The full info is at: http://pastebin.com/824079 Extra, I'm using : libpri-1.2.3 zaptel-1.2.10 On a x86 stable Gentoo box. Kernel: 2.6.17 gcc-4.1.1, glibc-2.4-r4 Is that an hardware problem? Should I try the other card? -- Gustavo Felisberto (HumpBack) Web: http://dev.gentoo.org/~humpback Blog:

I am in the process of buying a TDM800 card from Yeastar ( http://www.yeastar.com/products.asp?TypeName=TDM800%20PCI%20Card&cTypeName=1 ) Any one has tested this cards? How reliable are them? I am specially interested in the FXO/FXS module. -- Gustavo Felisberto (HumpBack) Web: http://dev.gentoo.org/~humpback Blog: http://blog.felisberto.net/ ------------ It's most certainly GNU/Linux,

I have a costumer with a Siemens PBX installed, and I would like to setup a Asterisk system that would act as a kind of Proxy between the Siemens PBX and the operator network. The current setup is: Siemens PBX 2*PRI <-> Operator what I want is: Siemens PBX 2*PRI <-> Asterisk BOX <-> Operator For the Siemens PBX the Asterisk Box would be a standard Telephony Operator, and the

I'm using asterisk 1.2.14 When asterisk stores voicemail messages in /var/spool/asterisk/voicemail/default/EXTENSION/INBOX files are created with: -rwx------ 1 asterisk web-aster 6690 Apr 17 16:08 msg0002.WAV -rwx------ 1 asterisk web-aster 6732 Apr 17 16:08 msg0002.gsm -rw------- 1 asterisk web-aster 274 Apr 17 16:08 msg0002.txt -rwx------ 1 asterisk web-aster 65324 Apr 17 16:08

Please chime in if you've ever wished for digium to make a 4-port daughter board with a combination of 2FXO AND 2FXS ports on the same card. When using the 800 series cards, one must either choose 4-port permutations of FXS/FXO, OR one must give up 2 valuable ports. In other words, when you add ONE 100-series daughter board, you give up TWO of your physical ports. Is there a technical

Currently running two POTS lines into an asterisk system. Analog and SIP on premises. Being in the sticks, the POTS service is abysmal for quality, especially in the rain. Recently, cable has become available with VOIP phone. The cost savings are attractive as it can replace several independent services for TV and internet (currently satellite). But, I cannot get much out of them, regarding

I'm running RedHat 9 with a TDM400 (2FXO, 2FXS). Before I implemented Asterisk, some users were using Bell services to set-up 5 way calling: The user would set up a three way call on one line, switch to the second line, set up another 3 way call and then link the two lines together with the Flash key, thus establishing a 5 way call (the user, 2 others on line 1, another 2 on line 2). How

Hello again Asterisk people. I am running Asterisk 1.42 on an old PowerPC ibook. I have had this deployed for several years now, with pretty good results. Recently I added a callerid service to my landline (qwest). I am using the audiocodes MP114 2fxo/2fxs gateway, which is an outstanding piece of hardware once it's configured (lol). Anyhow, I can see that the gateway is passing

Hi, all-- What do you make of this? Here's my call log--looks like there are a lot of calls going in and out of the server that are not real incoming or outgoing calls. Does anybody have any clue what is happening? 2006-11-14 16:41:00 Local/8183... 8183461773 "8183461773" <8183461773> 8183461773 NO ANSWER 1 47. 2006-11-14 16:40:59 IAX2/Voice... 8183461773

Hello, I connected a Micronet SP5014 2FXS + 2FXO gateway to the asterisk, the problem is i can make call but can't receive calls. If i make a "sip show peers" it shows the micronet is not connected to the asterisk. Does anybody knows how to configure the micronet and asterisk to solve this problem ? Thank you

We are experiencing problems with FXO modules on TDM400P. From time to time they stop responding to incoming rings although they work fine if we use them to dial out. It's been verified at least in two different installations (using different mainboards) in two different locations. The only solution to the problem is to stop asterisk, then unload and reload kernel drivers. The problem appears

I have set up asterisk@home <mailto:asterisk@home> with Digium TDM400P 2FXO/2FXS. I am unable to seize my trunks from either soft or analog phones. Inbound calls result in answer/disconnection. I see the following error code on my asterisk server INIT: Id "s0" respawning too fast: disable for 5 minutes Does anyone have any suggestions for me? I?d really appreciate some help on

I'm running AsteriskNow 1.7.1 with a OpenVox 2FXO/2FXS card, SPA942 SIP phone and outgoing SIP and IAX routes. When I dial local PSTN numbers from the SPA942 using the FXO channels I observe a 5-7 second delay between when the PSTN number answers the call and when Asterisk connects the call at my end. There's enough delay time that I hear an additional ring after the PSTN number has

Hi I've a Sangoma A200D with 2FXO and 2FXS. When using it with only the FXO module, it's all good. But when I put in the FXS module and connect the power, logs tells me not enough power. > Mar 31 14:11:54 phone kernel: [ 4761.246931] wanpipe1: Module 1: > Failed to powerup within 600 ms (8V : 72V)! > Mar 31 14:11:54 phone kernel: [ 4761.246937] wanpipe1: Module 1: Did

Hello list , I?m putting to work a new asterisk box. I?m running * 1.0.3 with (one ) Wildcard TDM ( 2FXS* 2FXO) and (one) E-100P. Both boards are working well. ztcfg don?t show me any error. zttool list both cards as "OK" But when i run asterisk on verbose mode i get those errors : [chan_zap.so] => (Zapata Telephony) == Parsing '/etc/asterisk/zapata.conf': Found --

Hello, I have a current asterisk 1.8.13.0 asterisk-addons 1.6.24 asterisk-sounds 1.2.1 dahdi-linux-complete 2.6.1+2.6.1 libpri 1.4.12 and asterisk-gui 2.1.0.rc1 (not trying to use the gui, want to do everything by hand) with a TDM410 with 2FXO and 2FXS. I have my POTS (PTNS) line plugged into port 1 (FXO) and a analog phone connected to port 3 (FXS). I compiled asterisk with asterisk

Hi, I''m starting to use Test::Unit to create unit tests for my Rails Applications/Plugins. I don''t have much experience in Ruby Unit Testing. The problem is that the output report is very simple and it is very difficult to discover where is the error. Test::Unit does not show the line number of the error and the Stack Trace printed using the --trace option does not help either.

Hello, I''m using kernel 3.1.0 and I have both / and /home as btrfs. I used suspend to ram quite often and never had a problem, but yesterday I''ve suspended to get into a plane and when I resumed my /home was all about input/output errors. Reboot did not help either. My root (/) did not suffer any problems. Today I''ve upgraded btrfs-progs to latest GIT and tried scrub

With the lack of info on Yoda Communications in Taiwan and their hardware, I thought I'd post my experience. I got my hands on a few H.323 VG-400's and VG-100TA's. http://www.yoda.com.tw/model.php?type=VoIP_Solution&pname=VG400 2 of the VG-400's were 2FXO/2FXS models. A couple were deployed to SE Asia, where we planned to offer our services. Originally, I ran a GnuGK server

From: Gustavo Padovan <gustavo.padovan at collabora.co.uk> Replace the legacy drm_send_vblank_event() with the new helper function. v2: add crtc to nouveau_page_flip_state (comment from Mario Kleiner) Cc: Mario Kleiner <mario.kleiner.de at gmail.com> Signed-off-by: Gustavo Padovan <gustavo.padovan at collabora.co.uk> --- drivers/gpu/drm/nouveau/nouveau_display.c | 19