similar to: Attended Transfer

Hi, I would like to use the new atxfer (native assisted transfer, see mantis item #3241) , but I've partially been able to make it work. I can receive a call and then having the caller hear MOH while talking with another extension (the one I want to transfer to), but then I can't make the caller and the trasferred talk hanging up or pressing any key combination I'm aware of. My

While on conversation with another party, I dial the atxfer key sequence. Asterisk says "Transfer" then gives you a dial tone, while put the other party on hold music. I dial the transferee number and talk with the transferee, then I hang up and the other party must be connected with the transferee. But this doesn't work the transferee hears a beep. -- Playing 'beep'

So I have read and read and read... google is my friend and the wiki is by brother... However, I am still unclear on what the preferred method of using the pound sign is. If the Pound sign is set aside for Transfer.. Then when I make an outbound call to my bank I can not "Enter my PIN followed by Pound" Likewise if I turn off the ability to transfer when initiating a call, my bank pin

Hi, I try to set up attended transfer in my Asterisk Box . My features.conf look like this: [general] parkext => 100 parkpos => 1-5 context => parkedcalls parkingtime => 100 transferdigittimeout => 3l courtesytone = beep xfersound = beep xferfailsound = invalid featuredigittimeout = 500 ;adsipark = yes pickupexten = *8 [featuremap] atxfer => *2 blindxfer => # disconnect

Hi, In 1.6.1, it seems Attended Transfer do not behave exactly behave like Blind Transfer when transferer hangs up before callee answers : - in Blind Transfer, caller (ie transferee) is hearing Ringing tone when callee's phone is ringing - in Attended Transfer, caller (ie transferee) is hearing Music On Hold when callee's phone is ringing - in Attended Transfer, if callee don't answer

Is features.conf included in the cvs as of 8-1-04? I have updated, but am not seeing it?

Hi all. I am trying following scenerio for call park & pickup. voice is flowing established between B & C, after call-pickup ( instead of A & B ). can anyone please clarify why it is happening like this, ( or ) do i need some more configuration for park&pickup ? A B

I cannot seem to get any transfers to work at all. The console show I have #1 amd #2 set up for Blind and Attended Transfer, but when I hit these buttons on my handset nothing happens (other than I hear the dtmf tones on the other end of the line). roo*CLI> show features Builtin Feature Default Current --------------- ------- ------- Pickup *8 *8

All, Is there a way of rejecting a call using SIP in the Asterisk Dialplan? Essentially, I want to look at the called number and if it matches something I don't like I want to send back a SIP response which will not cause the other end to 'hunt'. The response codes that will achieve this are: 401 Unauthorized 403 Forbidden Is there a way of getting Asterisk to send back such a

OK, it's been a while since I drank from the pool of wisdom hear on the list. After cracking my head against the wall for a few days trying to figure this out, I have decided to swallow my pride and take the drink. So, on to my question: I have some agents/operators setup in sip.conf which point to a context where I have just about disabled outbound calls (only specific numbers can be

Greetings all, I'm trying to connect to an AT&T teleconference, but the call is never marked as ANSWERED by asterisk and therefore won't bridge and continue. The only work-around I've come up with so far is to dial like this: Exten => 744,1,Dial(Zap/g1,,p) The "private" mode keeps the line open without trying to do a bridge, but requires the

I would like to know if atxfer is supported somehow because there seems to be little documentation for this feature. I know most people expect a good SIP/IAX phone to do the job but I think it's nice to be able to do attended trasnfers with a simple ATA-connected analog phone. I have Asterisk 1.2/Freepbx and features.conf has a line regarding atxfer and I set it to *2 (Default). While # works

Hi, I have been trying to enable attended transfer for callee. When the callee pressed *2, DTMF tone was heard by the caller. But when the caller pressed *2, attended transfer started. It's strange. I used two SIP phones. My Asterisk version is "Asterisk CVS-HEAD built by root@router on a i686 running Linux on 2005-06-27 06:07:18". In features.conf, I have: [featuremap]

Hi list, I enabled the transfer function in my dialplan, but I may configure it wrong because sometime when I call a SIP extension number from one FXS port, the SIP side will hear word "transfer", I hear nothing, after that, the call conversation is fine.I'v had this problem for a long time, could not get clue where I configure it wrong. here is my related config part: sip.conf:

Hi all, I've got Asterisk 1.2.10 up and running on Debian using the back ports. I noticed that it didn't come with mpg123 or depend on it and I believe I read somewhere that asterisk now handles it's own mp3 playback? Is this true? If so I must have a problem, because I hear no music when putting someone on hold. When looking at the console when putting someone on hold, I see

Hi all, i have the following setup PSTN -> routing server (asterisk 1.6.2.11) -> IAX -> callcenter asterisk 1.6.2.9 -> SIP -> agent Does work quit fine - then agent does have the abibility to transfer a call to a third party - the agent can initiate the transfer over a web interface - it does generate a asterisk manager atxfer request... So agent does initiate transfer - call

Hi! A few months ago I needed some help for the following issue: .) a call comes in .) Person A takes the call and does an attended transfer to Person B .) Person A hangs up the phone without waiting for Person B taking the call .) the caller get lost at this point !! At this point the attended transfer should go into a blind transfer. The phone of Person B should still be ringing and the

Eric Wrote: ----------- The trick is not to use options you don't understand. "show application dial" will show you what the t and T options are for. Most people use the transfer feature of their phone, rather than using the T/t hack on the Dial line. Sounds like you are using CVS-HEAD and so will have to configure stuff in /etc/asterisk/features.conf. /Snip/ Eric, Thanks for

Hi guys, I am wondering (and have been unable to find out thus far) whether Asterisk sets some special channel variables or something when a call is transfered with the REFER method. Basically, I'm trying to figure out if it is possible to somehow get a transferred call back to the transferrer (as it is done with the built-in atxfer) after X seconds (or an unsuccessful attempt). Using a

Hi, I successfully installed asterisk 1.0 with Capi 0.35. In my pbx system I would like to use the atxfer function but is not included in the stable asterisk. Is there a way to include it in my version of asterisk: I did no used the last cvs because I can't compile the chan_capi .in it. :( Bye