similar to: Cisco IAXmodem HylaFAX

I'm running into a strange issue with Asterisk + Iaxmodem + hylafax on the same machine. After rebooting the iaxmodems don't register to asterisk. Stoping and starting the relevant services gets it working, but what is the point of using init scripts if it does not work right? I already tried to adjust the init scripts in /etc/rc3.d so I have: S50asterisk s90iaxmodem S95hylafax So it

Hi! from 2 days I'm trying to run hylafax server and iaxmodem with Asterisk 1.8.5. I have 2 computers in the lan, one is the Asterisk PBX and the other is the server with hylafax and iaxmodem installed. In Asterisk I set up an IAX trunk in this way: ___________________________ iax.conf [iaxmodem] type=friend context=outgoing-fax disallow=all allow=ulaw username=iaxmodem secret=password

Can anybody point me in the right direction please? I'm having some issues getting iaxmodem and hylafax to talk to each other. I have no doubt that someone has had this type of issue before but I can't find anything useful in the archives or on Google. Under RH9, with chan_capi 7.1, Asterisk 1.2.24, with an AVI Fritz ISDN2e BRI card all working perfectly... I've downloaded and

I think I'm very close to getting IAXModem and Hylafax going, but my current inbound hylafax logs show this: Feb 23 10:09:37.98: [ 3638]: MODEM <Empty line> Feb 23 10:09:37.98: [ 3638]: MODEM TIMEOUT: waiting for v.21 carrier Two questions - 1) Does anyone know what step I missed here? (I.e. please help!) 2) Is there a document I should be working off of? Google doesn't seem to

I just installed Hylafax with Iaxmodem and I am not getting good results when receiving faxes. I can see that the modem is reporting the following: Mar 31 16:19:08 pbxoficina FaxGetty[5377]: MODEM Supports 2400 bit/s Mar 31 16:19:08 pbxoficina FaxGetty[5377]: MODEM Supports 4800 bit/s Mar 31 16:19:08 pbxoficina FaxGetty[5377]: MODEM Supports 7200 bit/s Mar 31 16:19:08 pbxoficina FaxGetty[5377]:

hi folks. i'm experimenting with iaxmodem + hylafax using DID to determine where to send the fax to it's final destination. however i have difficulties passing the DID information from iaxmodem to hylafax. in extensions.conf: exten => _XXXX,1,Dial(IAX2/iaxmodem0/${EXTEN}|20|r) exten => _XXXX,n,Dial(IAX2/iaxmodem1/${EXTEN}|20|r) exten => _XXXX,n,Busy exten => _XXXX,n,Hangup

can anybody help me to choose the most reliable fax solution for * . after googling the net i found that there are at least two solutions for this, app_rxfax+spandsp and iaxmodem+hylafax. - what's the differences between these two? - which one's better? why? thanks

I have all three running on the same box. I say OT because it appears asterisk is doing it's job just fine. It must be an IAXmodem or faxgetty (hylafax) problem When faxes work, they look great. I have ten IAXmodems setup with different ports and they register fine. I have ten faxgettys that startup fine. I start the IAXmodems and then faxgettys in inittab. They are setup as a roll

faxguy, maybe you can tell me why As I've noted in previous posts I'm evaluating HylaFax with IAXModem. When I run iaxmodem and faxgetty through a console the modem works 100% I have yet to find a fax that it won't tie up with. When I run IAXmodem and faxgetty in initttab, the modem is extremely slow to respond and only actually does anything about half the time, the rest of the time

Hi, I'm trying to receive faxes using hylafax / iaxmodem but I just can't get it to work. We're using Sangoma E1 cards and have calls coming in over PSTN. I've tried turning hardware echo cancellation off but it makes no difference. This is what I get in /var/spool/hylafax/log: [root at faxhost log]# cat c000000003 Jan 14 12:44:43.39: [ 3403]: SESSION BEGIN 000000003 18005551212

Hi, we have a faxserver with Asterisk, IAXModem and Hylafax. Faxes come from a SIP trunk to Asterisk, then are forwarded throught 5 IAXModems managed with Hylafax. Hylafax users can also send faxes to these modems and Asterisk send them throught the SIP trunk. We also have a dedicated modem used only for sending faxes coming from an Hylafax dedicated user. Sometimes Hylafax reports that a modem

Hi, I have problems with asterisk and hylafax+ iaxmodem. I can successfully send faxes to Panasonic KX-FT932 fax, but with Xerox WorkCentre M20i I have problems: No carrier. This is hylafax log, maybe you can suggest me where to find ... Oct 17 07:38:48.22: [22428]: SESSION BEGIN 000000041 180037052390906 Oct 17 07:38:48.22: [22428]: HylaFAX (tm) Version 4.4.2 Oct 17 07:38:48.22: [22428]: SEND

I made a little write-up that attempts to synthesise a lot of the information out there about how to get HylaFAX working with Asterisk by way of IAXmodem for inbound faxing: http://blog.evaristesys.com/?p=24 Of course, there are bound to be some things I've left out or are grossly in need of correction. So, before I link it off the voip-wiki I am extremely eager to solicit the input of

Hello. We are running Asterisk 1.2.23 iaxmodem-0.2.1 and hylafax-4.3.3 When we send faxes the people who receive the faxes complain that they look wrinkled or smashed up. Sometimes they are missing random lines. Has anyone seen this happen, or know how to fix it?

In trying to get the asterisk and faxing working I had to resolve to using iaxmodem and hylafax. I have incoming working, but outgoing the other fax rings but it would appear from web searches that the fax signals are too low to be "heard" I can read about rxgain and txgain for zapata. my fax setup goes direct from aterisk <-SIP-> SIP Provider <- Fax Machine -> It never

Arch = x86_64 OS = CentOS-6.3 (FreePBX) Asterisk = 11.3.0 (FreePBX) Hylafax+ = 5.5.3 (epel) I am installing an Asterisk server with the intent of having it act as our fax server. The Asterisk system was installed using the current FreePBX distro which is reputedly based on CentOS-6.3. I have installed Hylafax+ from epel and I have built and packaged IAXModem-1.2.0 for CentOS-6 using mock and

Hello, I have anolog lines coming throug Dahdi to Asterisk Server, one of the anolog lines is used for fax line. I received fax fine without any problems using Iaxmodem with Hylafax Server. Outgoint fax is the problem, when IAXMODEM dial out using Dahdi channel, dahdi answers and start to dial the outside number however Iaxmodem thinks that dahdi is the remote fax machine and starts sending fax

I am testing out hylafax and iaxmodem. Submitting jobs to the hylafax server and having it then dial using iaxmodem is working fine. Hylafax server is talking to my Asterisk box that has a Sangoma A101 in it via iaxmodem via an IAX channel using ulaw. A call coming into a certain test DID comes into the Sangoma A101 then it goes to another box via IAX ulaw that uses the rxfax app to

Hi all, I'm installing Hylafax on my Asterisk system. From what I've read, I can either use IAXModem or T38Modem to provide the virtual fax device. So at the risk of starting a religious war, which one should I use? I don't mind running IAX if I have to. I want as much flexibility and stability as I can get. So, what are your recommendations? Mike. -------------- next part

Hello all, I have an asterisk box running in a customer with Hylafax, iaxmodem, asterisk 1.2.18. The service can receive faxes, from a lot of fax machines, but there are a couple of them that asterisk Hylafax cannot complete. This calls arrive the asterisk box, asterisk detect that this calls are fax, asterisk answer the call, and then Hangup the call. But hylafax do not receive nothing. When