similar to: Siemens Gigaset C450 IP vs S450 IP

Hi folks: I know it's come up a few times before, but I need some more detail. I'm looking for a SIP DECT (cordless) phone for North American installations. I've heard only of the Siemens Gigaset S450/C450 phones. Apparently these aren't sold for use in NAm, even though they're supposed to be legal (in the United States, anyway). On top of that, I understand they have some

Can anyone recommend a good cordless user-configurable SIP hardphone that is readily available in the states and doesn't cost $300? There seem to be a plethora of decent and affordable corded phones (like from Grandstream) but the search for a cordless unit seems elusive. I purchased a vtech 8100 online only to discover after receiving it that it is locked to vonage service. Thank you.

For some unfathomable reason, Siemens USA doesn't offer the Gigaset IP range in the U.S. I'm particularly interested in the Gigaset S685 IP. Since it's DECT 6.0, and there's an English (UK) version, I'm thinking it should work just fine, after dealing with the walwart issue (and maybe caller ID signalling). Anyone imported one from the UK and using it in the US? for how

2008/10/5 robert.boardman at gmail.com <robert.boardman at gmail.com> > Kevin P. Fleming wrote: > > Olivier wrote: > > > > > >> 2. R Hook-flash key is now available to transfer calls. > >> In s450IP web management server, its defaults settings are : > >> Application-type: dtmf-relay > >> Application-signal: 16 > >> >

apt-get update apt-clone upgrade Any first impressions? -- Eugen* Leitl <a href="http://leitl.org">leitl</a> http://leitl.org ______________________________________________________________ ICBM: 48.07100, 11.36820 http://www.ativel.com http://postbiota.org 8B29F6BE: 099D 78BA 2FD3 B014 B08A 7779 75B0 2443 8B29 F6BE

----- Forwarded message from Zooko O''Whielacronx <zooko at zooko.com> ----- From: Zooko O''Whielacronx <zooko at zooko.com> Date: Sat, 21 May 2011 12:50:19 -0600 To: Crypto discussion list <cryptography at randombit.net> Subject: Re: [cryptography] rolling hashes, EDC/ECC vs MAC/MIC, etc. Reply-To: Crypto discussion list <cryptography at randombit.net>

Hi All, Just added a Siemens DECT SIP/PSTN S450 phone to login to my A*k server, and I see "Got SIP response 405 "Method Not Allowed" back from 192.168.3.64" but the phone seems to work ok. Any ideas where it falls over in the SIP protocol? I've included this in the debug below. ubiphone*CLI> <-- SIP read from 192.168.3.64:5060: --- (0 headers 0 lines) Nat

Hi, My Gigaset S450ip allows 2 simulatneous calls when each incoming call are targeted to different phones. When both calls target the same extension, the second one is forwarded to voicemail. I couldn't check yet SIP messages but has anyone met this limitation (one simultaneous call per phone) ? Regards -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi list, Before purchasing a number of Siemens DECT SIP phones, the Gigaset S675 IP, I read that the problems with MWI had been fixed with the latest firmware version (see http://www.voip-info.org/wiki/view/Siemens+Gigaset+S675IP). Now I'm not so sure that's the case. After setting up a network mailbox for one of these phones, as well as an Asterisk voicemail account (ext.

Hi, Searching this list archives, I couldn't find a definitive answer to my question : how to send SMS to Gigaset phones ? My goal is to send Alert SMS such as "This phone system will be stopped in 5mn for maintenance" to every terminal (SIP phones and Gigaset DECT phones). (So at the moment, I'm not looking for way to send SMS from handsets). I could successfully send 1 short

Hy all of you, Is anybody has a tutorial for integrate a siemens gigaset as180 and connect it to Asterisk. I've searched a lot and didn't found something concluding. Regards -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20110611/17522d7a/attachment.htm>

Hi all. We have Snom phones which do have a defined key in order to drop incoming call WITHOUT answering. Pressing that key, a "SIP/2.0 486 Busy Here" message is sent back. We have other phones (I.E. DECT Siemens C450IP, or ATCOM 320 or other) which DO NOT have any key to do that (or the key does not work, as is with Siemens C450 IP ): you have to answer and immediatly after hangup the

Hi there, in case anyone is interested, I've just taken ownership of a small home network (3 handsets) of the brand new Siemens DECT PSTN/VOIP phone. It works great with Asterisk. Here's my overview and review so far... http://www.theopensourcerer.com/2008/04/27/siemens-gigaset-685ip-phones/ Cheers Al -- The way out is open! http://www.theopensourcerer.com

Hi, after a flaky 8-drive Linux RAID10 just shredded about 2 TByte worth of my data at home (conveniently just before I could make a backup) I''ve decided to both go full redundancy as well as all zfs at home. A couple questions: is there a way to make WD20EFRX (2 TByte, 4k sectors) and WD200FYPS (4k internally, reported as 512 Bytes?) work well together on a current OpenIndiana? Which

When you configure the Siemens gigaset handsets (I have S685IP), there is a single option for all handsets to use either the POTS interface or VOIP as the default outbound destination - you then need to add a dial suffix if you want to use an alternate outbound route. Does anyone have any suggestions as to how to make just *one* of the DECT handsets only use the POTS but others default to

Hello, My goal is to provision C450IP or S450IP models. Has anyone a hint to provision them from configuration files ? Usually, we use dedicated menu embedded inside Gigaset handset. An http server also exists but I couldn't find any dhcp-tftp combination to configure them. Any clue ? Regards -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi, With my Gigaset C470IP (with latest 02223 firmware), I can't find a way to access SMS settings from web configuration app or using a handset. Has someone been more successful without using auto-configuration mode ? (For instance, manual says an SMS entry is showing on handset screen but as I plugged my base station into a private LAN, I skipped the whole auto-configuration process ).

hello, I would to define and unattended process to configure devices which are http-server-enabled, use DHCP but do not use TFTP-DCHP to configure themselves during boot. Has anyone worked on such subject ? I was thinking of something like : populating configuration file from device web pages (rendering this as generic and flexible as possible) writing a script which reads this file and set

Hi again, thanks for all the replies to the all in one with ESXi, it was most illuminating. I will use this setup at my dayjob. Now for a slight variation on a theme: N40L with ESXi with raw drive passthrough, with OpenIndiana/napp-it NFS or iSCSI export of underlying devices. This particular setup is for a home VMWare lab, using spare hardware parts I have around. I''m trying to do

----- Forwarded message from Josh Paetzel <josh at ixsystems.com> ----- From: Josh Paetzel <josh at ixsystems.com> Date: Fri, 26 Oct 2012 09:55:22 -0700 To: freenas-announce at lists.sourceforge.net Subject: [Freenas-announce] FreeNAS 8.3.0-RELEASE User-Agent: Mozilla/5.0 (X11; FreeBSD amd64; rv:13.0) Gecko/20120621 Thunderbird/13.0.1 -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1