similar to: Queues and Flash/SendDTMF in hybrid PBX

Hi, I've solved the flash transfer problem changing the flash time in the zapata.conf file, I've set: flash = 200 (the defualt was 750 ms) in the extensions.conf the code is for example: exten => 42,1,Flash() exten => 42,2,SendDTMF(42,250) exten => 42,3,Hangup() now the transfer with flash works correctly. About the question whether my PBX expects a hook flash for

Hi, everybody: As part of a paging macro I'm using SendDTMF to send digits to the called party. The section looks like this: exten => s,1,Wait(0.5) exten => s,n,SendDTMF(9531290) exten => s,n,Wait(1.0) exten => s,n,Set(MACRO_RESULT=CONTINUE) To test I direct the call to a live extension just to hear what's happening -- what actually happens is that only the 9 is sent, and

I've tried to transfer a call using the Flash command, but with my configuration it doesn't work. I have a traditional PBX connected with a zap channel to Asterisk that acts like an IVR: TELCO line --> traditional PBX (FXS) --> (FXO) Asterisk >From the TELCO line I can make a call to the traditional PBX and reach Asterisk, the IVR system on Asterisk answers the call and I can

I have been trying to figure a way to SendDTMF into a MeetMe room using the Manager API. I can't redirect everyone into another context and then bring them back because that would mess up my logic. I am trying to use local channels and the originate Action to accomplish this. Exten: 3441115 Priority: 1 ActionID: actid-00000001 Context: senddtmftones Action: Originate Channel:

I'm not sure why but my call is being ended when I SendDTMF(*). I'm using agi to originate a call and set the context,extension,priority to test,1,1 respectively. I've got the following in my extensions.conf: [test] exten => 1,1,Answer(); same =>n,Wait(5); same =>n,Verbose(1, Sending *); same =>n,SendDTMF(*,500); same =>n,Verbose(1, Sent *); same

Hi, I am trying to understand why some of my call transfers fail. My scenario is as follows: Legacy PBX1 ---PRI (EuroISDN) Zaptel--- Asterisk PBX2 Step1: PBX1 extension 101 calls PBX2 extension 102 Step2: PBX2 extension 102 answers the call and transfers it to PBX1 extension 103 Step3: PBX1 extension 103 answers the call and transfers it to PBX2 extension 104 Step3 fails and extension 103

Hi everyone: The following code dials our prefix, sends a beep, and sends a DTMF "c" tone, then dials the phone number. I need to send the DTMF only if the phone is answered. [voip] exten=>i,1,NoCDR() exten=>i,2,Hangup() exten=>s,1,Wait(2) exten=>s,2,Background(beep||) exten=>s,3,DigitTimeout(6) exten=>s,4,ResponseTimeout(10) exten=>s,5,SendDTMF(c)

Hi all! I would like to solve some problems: I have a sip provider that lets me make pstn calls after listening some stuff and entering a pin number: 1) How can I make Asterisk enter the pin number? Then wait 1 second and enter the phone number? I have in extensions.conf: exten => 6*,1,Dial,SIP/2002@myprovider,60,tr I have tried with w (like with ZAP channels) but it does not work, nor

Hi Here is my scenario Mr.X's Asterisk Box Dials Mr Y's Asterisk Box (thru Zaptel channels)after Channel establishment Mr. X send DTMf tones to Mr Y using by using application "SendDTMF()". My question is this is there any method that Mr. Y Saves these DTMF Tones in any variable (after converting back to their Corrosponding Digits). Thanking in advance Obaid

Hello all, I am trying to use asterisk to call a local access gateway by dialing a fix number, after getting connected, the is a IVR prompt for pin number and finally the real destination number. I manage to use asterisk to dial to the gateway but have no idea how to send the pin number and destination number. This is due to asterisk only process the next ext only if dial app has terminated. My

Problem: Flash on X100P does not flash. Phone line has Call Transfer. With this line plugged into a regular phone, it can receive a phone call. Then, depress the hook momentarily, release. Dialtone is now available. Dial a different number. Call is answered. Hook Flash again, now in a three way call. Hang up. The other two parties are still in communication. Now, plug same line into the X100P.

Hi, I'm trying to get my X100P to Dial the following sequence to gain access to speed dial numbers on my Norstar PBX that the X100 is connected to... [FLASH] [*] [0] [22] (where 22 is the speed dial number) But so far I've had no luck, with the following extension:- exten => 922,1,Flash(${DIALOUTANALOG}) exten => 922,2,Dial(${DIALOUTANALOG}/*022) exten => 922,3,Congestion

Greetings. I am attempting to configure a system based on Asterisk 1.2.3 to be used as a backup should our aging voice mail/auto attendant system fail, which seems increasingly likely given its advanced years. The first part of this task is getting the auto attendant feature to work correctly, which I would have figured to be relatively easy. I have successfully built a menu structure, but cannot

*************** *** 41,50 **** APPS+=$(shell if [ -f /usr/include/linux/zaptel.h ]; then echo "app_zapras.so app_meetme.so app_flash.so a pp_zapbarge.so app_zapscan.so" ; fi) APPS+=$(shell if [ -f /usr/local/include/zaptel.h ]; then echo "app_zapras.so app_meetme.so app_flash.so a pp_zapbarge.so app_zapscan.so" ; fi) APPS+=$(shell if [ -f /usr/include/osp/osp.h ]; then

I've got a piece of CPE equipment that has an FXS port that I have tied to an FXO port on a TDM400 clone card. Normally, if I go off-hook with a standard telephone connected to it, I get a dialtone. If I dial a digit, and send a hookflash, the device will provide a dialtone back for the next available channel on the device. I'm trying to recreate this same behavior with Asterisk,

I have an X100P connected to an extension of a Panasonic PBX. When a call from the PSTN comes in, it is routed directly to the extension where the x100p is . I want * to answer the call, play a message and then transfer the call to another extension via the Zap channel where the call was received (I need to flash the zap channel) . If this extension doesn't answer I want then to dial an IAX

I managed to sort out my earlier query regarding flash times (changed delay in zapata.conf) Now, I am getting a timeout after the Flash command in an outgoing call-file based call: -- Attempting call on Zap/1/108 for 567112@demo:4 (Retry 1) > Channel Zap/1-1 was answered. -- Executing Festival("Zap/1-1", "Dialling now") in new stack == Parsing

Hi, Does anyone know of a way to implement the following: * an incoming call is connected to an internal extension (the internal channel is the target of the "dial") * Asterisk listens for DTMF generated by the internal extension (the dialed party) * when it detects DTMF, it jumps to a new context for the dialing party; I suppose the dialed party could be hung up on, or sent to

Hey, This is weird, I wonder if anyone has an explanation? If I call a SIP server and inject DTMF with a wait in it, my router will then lock up causing asterisk to lose Internet connectivity obviously, but also making it very hard to see what happens. It appears that if there are no 'w' in the DTMF string, it doesn't lock up. Anyone have any guesses on this? I called a local

Hi, I was woredering if you could help me to put into practice this solution. The idea: Create a IVR-Voicemail The scene: PSTN------/6------PBX--------/12--------- Internos | /4 ports | IVR-Voicemail The Operation: 1)Where a call enters from the PSTN, the PBX flashes and