similar to: DTMF detection during Call

I am following the example at http://www.voip-info.org/wiki/view/Asterisk+tips+findme but I find that no matter what, the call is connected. Can anyone confirm that config is working for them? Any suggestions appreciated. I need to transfer calls to a list of cell phones, ring all of them, allow them to screen the call, connect the call to the first number that accepts the call, and allow

Hi, As of v 1.6.1.1, can anyone tell me what the current possible values for DIALSTATUS could be? I found http://www.voip-info.org/wiki/view/Asterisk+variable+DIALSTATUS but believe it is outdated since there is no FAIL or FAILED in this list. Thanks! -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi, I am trying to implement call forwarding on the event that my ATA was not reachable to Asterisk, whether due to registration timeout, network interruptions between the ATA and Asterisk, or simply because the network on which the ATA resides in unreachable for any reason. I there a way of implementing such a feature in Asterisk? I have implemented CF unconditional, and CF on busy, CF on

Hi all, I am trying to make decisions in my dialplan based on {DIALSTATUS}. I am creating calls using AMI (rawman with parameters via URL) with action:Originate. I am using SIP and an outside voip provider for the calls. If I define the number to call in the Channel parameter (e.g. SIP/15555555555 at myvoipprovider, the call gets placed before entering the context that I defined. I understand

My phone still says Not-Registered. I have a Polycom SoundPoint 600 SIP phone. Here is my sip.conf file: ; ; SIP Configuration ; [general] context=default ; Default context for incoming calls port=5060 ;added bindport=5060 ; UDP Port to bind to (SIP standard port is 5060) bindaddr=0.0.0.0 ; IP address to bind to (0.0.0.0 binds to all) srvlookup=yes ;

Jim, and all: Thanks for the response. If I can repeat what you are saying: you don't have to define the multiple lines in sip.conf? For comparison, with my current esi setup, we have 10 outgoing lines. If one line is busy, then the service just rolls to the next number. This is set up with the phone service. That doesn't have to done with outgoing sip lines? Does the dialstatus

Hi everyone! I'm quite a newbie at this Asterisk stuff so please bear with me. We've recently decided to start training in Asterisk via AsteriskNow! Asterisk version is 1.4.18.1 through AsteriskNow! 1.02 The box we have is paired with a Digium TE110P and we've managed to get it to the point where incoming calls via a single DID (from NTT Japan) can be received and answered

Yes I can hear the DTMF keys. I ve tried 2 different phones and 3 different mobile network providers. Nothing. I played with the rx/txgain values from hearing nothing to too loud... I have no more ideas. Marc -----Urspr?ngliche Nachricht----- Von: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] Im Auftrag von Steve Underwood Gesendet: Donnerstag, 4.

I am using Asterisk 1.2 with a TE410P connected to E1 PRI trunks. The application relies on a DTMF digit string sent by the phone after the call has connected. This DTMF is detected by Asterisk under the control of WAIT FOR DIGIT commands send from an AGI processor over a FastAGI connection. Usually the DTMF is detected without error, but on a significant minority of calls, Asterisk is missing

Actually I am using Asterisk 1.2.7.1, zaptel 1.2.5, libpri 1.2.2 I ve tried many values for rx/txgain togeher with echocancel and relaxdtmf. The detection is not working with call file, manager originate and not with the dial command to the mobile. I have no ideas left. I got it sometimes to work if I use a specific channel (i.e. Dial(ZAP/14/...) But with the same vaules on a second call there

Hi.. I just wondering why DTMF are not recognized by aterisk on incoming calls from my SIP provider ... ANy suggesteions ?` /Mike

Hi, I tried again getting DTMF detection on my ISDN devices with dahdi going again. I used the channel debug to see whether asterisk sees the frames and detects them as DTMF. Interestingly here's what works: 1. GSM phone -> chan_dahdi g1 -> asterisk -> can_sip -> SIP phone Both the GSM phone and the SIP phone can issue DTMF that will be detected as features (transfer) 2.

Hi all, I am trying to detect DTMF keys from a mobile when asterisk make an outgoing call to the mobile. The DTMF detection on incoming calls (also FROM mobiles) is working very well. The only problem is if asterisk called the phone... Nothing is detected. I am using a digium te205p with PMX/PSTN connection. Everything that I can find in forums are problems with dtmf detection on SIP. Any

Hello list, I have prepared a small tutorial today that deals with how to avoid Asterisk rebuilding DTMF tones when using it to connect industial appliances that use DTMF. You can find it at: http://astrecipes.net/index.php?n=248 I know it isn't everybody's piece of cake, but I thought somebody could be interested as well :) l. -- Home of QueueMetrics -

Hello, I will expose my problem here. Please tell me if it is not the right place as I am really new to that list. I use Asterisk as a SIP proxy. I have two users connected to it, Let's call them 1234 and 5678 In my dialplan I have two lines: exten => 1234,1,Dial(SIP/1234) exten => 5678,1,Dial(SIP/5678) The SIP phones (X-lite) are configured to send DTMF's using RFC 2833

Hi All, I'm using 1.8 Asterisk and i havet set DTMF mode=rfc2833 in SIP global default settings. but when user sending DTMf event with SIP info method my asterisk accepting that DTMF. If default or global setting is rfc2833 then how come asterisk accepting SIP info dtmf event? what to check please guide Amit-- -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi dears, I am from saudi arabia and using asterisk 1.6.2.13,Dahdi-2.3.0 and Digium, Inc. Wildcard AEX800 8-port analog card (PCI-Express) . I am facing problem with detecting caller id before first ring.I recorded the dahdi channel using dahdi_monitor command. Where I am able to see and hear caller-id dtmf tones. Pl tell me the procedure to upload recorded file if you needed. Something I want

Hi all, I have some probleem detecting DTMF send by a GSM phone, I'm using SIP with ulaw. do you know what are the options to improve the detection ? I'm using asterisk 1.05, is the CVS HEAD version had some improvement about DTMF detection? Florian.

Hi, it seems that there is a bug in asterisk's dtmf mode autodetection. Assume following sip.conf: [sipprovider] disallow=all allow=g726 dtmfmode=auto DTMF does not work. It seems rfc2833 mode is chosen despite it being obvious that this cannot work! The following configuration is necessary to get DTMF to work: dtmfmode=info In my opinion, this behaviour is counter-intuitive. I am using

Hello all, When I generate an out-going call from *, the DTMF detection is not working ? ASTERISK --> GW AS5300 --> PSTN But the DTMF is working correctly when it's an incoming call. PSTN - -> GW AS5300 - -> ASTERISK Well, I tried with the 3 dtmfmode of asterisk inband, rfc2833 and info, no way !!! Is it normal that asterisk try to setup the outgoing-call using ULAW ? if I