similar to: Mitel 5224 & Asterisk Distinctive Ring -- Anyone have it working?

Does anybody know if this is supposed to work and if so, what, if any, workaround is needed? I have other phones (Snom, Polycom) MWI working with this system fine. 6.0.0.19 (latest) Mitel SIP firmware is loaded. Thanks for your time, - Jesse -- Jesse Peterson <jesse.peterson@exbiblio.com>

Is anybody using Mitel phones? It appears that when you page a Mitel phone using asterisk's MeetMe, the paged phone will hang up the call its on to take the page. Thanks in advance. -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20110621/764a6fa9/attachment.htm>

We are attempting to configure SIP trunking between asterisk 1.2.22 and a Mitel 3300 CX box. The Mitel machine will gateway to the PSTN for us. I found this earlier post about doing this from July: http://lists.digium.com/pipermail/asterisk-users/2007-July/191630.html Unfortunately the promised configs never came ;(. We're having the exact reverse problem: we can register with the Mitel

I have a problem which I need to resolve. We are trying to put an asterisk between a Mitel PBX and the world. We are adding Voip service via Asterisk. Here is are config files for the settings but our problem is the following. We are able to send calls to the Mitel pbx and it's the T1 connections is green saying it's ok. The support department from Mitel said that they use e&M and

I have a small government department that wants me to implement a Asterisk installation, however, they connect to the Government PBX, a Mitel SX200, and want to keep the ability to do that. I know there is no chance to connect the digital extension lines, but would it be possible to have the pbx admins send analogue extensions over and have those lines interface through an FXO interface? Or

Hello, I have seen the Mitel 5055 SIP phone mentioned a few times on the list, does anyone have any wonderful or horrible things to say about it? We are thinking about using them because they have many more programmable buttons than the Snom200 phones and are about $70 cheaper. Thanks, MATT---

Has anyone here had any experience with Mitel 5220 IP phones with Asterisk? Basic features are working good, but I'm looking for more advanced features like sending text to the display or having the lights on when an extension is in use via the hint subscription. Thanks.

Hi all, Our company has deployed a Mitel 3300 system (only about 2.5 years ago) and we are experimenting with setting up Asterisk in our head office (for business continuity, ie we have a bird flu epidemic and no-one can come in, therefore use SIP softphones at home to co-ordinate activity) and at a remote site in the Isle of Man (connected via 2Mbps SDSL) Ideally we'd like anyone on either

Hi, A potential client (hotel) has a Property Management System that talks the "Mitel" protocol to their current Mitel PBX in order to receive CDRs (which end up being rated by the PMS system and charged back to guests). Does anyone know of any (free or otherwise) docs on this protocol, or better still have experience interfacing asterisk in a hotel situation like this? The PMS

I'm setting up an asterisk server to extend several extensions from a mitel pbx. I'd like to display the caller id that I receive from t he mitel pbx on the sip phone. The mitel PBX person has setup the PBX to send be callerid, but I don't see it. I've set chan_dahdi up with usecallerid=yes cidstart=ring cidsignalling=bell callerid = asreceived cid_rxgain = 0.0 Are there

Hi, I finaly find enough legal stuff, from the French government recommandations, to qualify our CentOS KVM/libvirt as a platform we can use. By the way the legal advisory of KVM is not as the save level as its technical quality : Le 11/07/2018 ? 18:07, Jean-Marc Liger a ?crit?: > > Hi, > > Some Mitel products, which are CentOS 6.x or 7.x servers based with > some telephony

Hi All, Our experience with * to date has been a bit limited. It's a 4xCisco 7960 network, linking our head office with a faraday caged datacenter. As a way of putting voicecomms into a sealed room, it was quick and easy to deploy, and works very well. As typically happens, we've now thought about extending the use of asterisk - and a new opportunity has cropped up. In three months

I've configured an analog/single line off my mitel sx-2000 to a x100p card in my *, however when the remote caller drops the line I get a dialtone back from my pbx and the x100p doesn't detect the end of the call. Any way I can tell * to drop? I've tried call progress but it doesn't seem to work...

Hi, All! Hopefully someone can point me in the right direction. I have a Mitel SX2000 Light that I am interfacing with my Asterisk box over a T1. I can receive calls on the Asterisk box without any problems, but when I call an extension on the Mitel, I heard the ringing from the IP phone, but I don't see anything on the Mitel, other than channel 1 of the T1 showing as "Locked

Hi Folks, Just in case there are any Mitel gurus here: 1) Is it possible to convince a non-dual mode 5220 phone to 'upgrade' to the SIP firmware? I have inherited one that's Minet only. 2) I have a 5310 conference unit and 5235 phone in SIP mode, but someone's lost the connecting lead. Can anyone recommend anywhere in the UK for a replacement lead or confirm the pin-out so I can

I am using Mitel 52xx dual mode phones in SIP mode. They work excellent, I am however having a problem with Voicemail retrieval. The Mitel Phones have a voicemail button on them. The light lites and clears correctly but I am not able to retrieve the voicemails using this button. In the phones web GUI it has a field for a voicemail server and port under additional servers in the networking tab.

Hi guys, I'm trying to reuse Mitel 5215 from proprietary system now into Asterisk :) ! I've them already with SIP and handling calls sucessfully! I've followed instructions from: http://www.voip-info.org/wiki/index.php?page=Asterisk+phone+Mitel+5220 Additional Servers * Outbound Server: Off * Outbound Server URL: blank * Outbound Server Port: blank * Voice Mail

Hi: Is anybody out there successfully using Mitel SIP sets with Asterisk? I hear they're not the most standards-friendly, and don't play well with non-Mitel switches. I have a pile of them and would like to see if I can use them, but not if it promises to be a hassle. -Stephen-

Hi: I've got a dozen Mitel 5020 IP sets and can't find out if they do SIP, or even find an administrator's manual for them. Mitel has been rather unhelpful. They only deal with "partner resellers." Has anybody used these with Asterisk? -Stephen-

Anyone familiar with getting Asterisk 1.4 and Mitel 3300 to play nice together? Mark Bergen Information Systems Manager Number TEN Architectural Group Winnipeg - 204.942.0981 Victoria - 250.360.2106 www.numberten.com<http://www.numberten.com> -------------- next part -------------- An HTML attachment was scrubbed... URL: