similar to: Pass through

Hi! Maybe you can help me. I want to tell asterisk to simply pass-through any codecs that my phones support. I have to use codecs that are not popular and implemented by a third-party, asterisk has nothing to do with them. I've made a test with g722, i've set all my two snom 300 phones to support only g722 and asterisk declined the sip invitation. That is bad for me. Is it possible that

Hi, I've have followed through the help docs in trying to get an initial setup going with two phones and the asterisk server. Firstly, all I'm trying to do is get the two phones actually talking to one another VIA asterisk.. I've added this to sip.conf: [phone1] type=friend host=dynamic defaultip=192.168.1.106 ;username=blah ;secret=blah dtmfmode=rfc2833 ; Choices are inband,

Hi, I installed Asterisk an all works fine exept for Grandstream. When I call with a softphone (ex X-ten) to a Grandstream (BudgetTone-100), I can make a conversation. = ok When I call to a softphone with a Grandstream I can pich up the call with the softphone but the Grandstream keeps ringing like on the other site you didn't pick up the phone.(even if you do so) It's the same when I

Dear, When I start asterisk -vvvvvvgrc and I ask 'sip show peers', I don't get the ip adress in the 'Host" field. Name = phone1 and phone2 Host=unspecified mask 255.255.255.255 port = 0 status = unmonitored I can ping the two phone's and get a reply (also from the laptop) phone ip adres 192.168.10.12 and 192.168.10.13 (server 192.168.10.11and laptop 192.168.10.14)

I don't know if this is possible, and I can't quite get my head around how to do it... If I am using DUNDi for redundancy in a cluster, when Phone1 makes a call to Phone2, both Asterisk A and B will be in the RTP stream: +---+ +---+ | A |-----| B | /+---+ +---+\ / \ Phone1 Phone2 Is there a way configure re-invites

Hello there, I appreciate any help about this problem that I can't figure out... I need to record all my calls: this is pretty easy using Monitor() before the Dial(). eg: exten => 425,n,Monitor(wav49,/var/spool/asterisk/monitor/425/${EPOCH}_${CALLERID(num)}_in,mb) exten => 425,n,Dial(${PHONE1},10) Now, I want to create a call group: I mean, I want a number (eg 800) that makes

Hello I have one phone (phone1) in one network, the other (phone2) in public network. both can call the other side; phone1 can be heard by phone2, phone2 can't be heard. I don't have NAT set on both end, but I use rtpproxy on SER. Is NAT still necessary to be set on both phones? Thank you! steven

Hi all I have registered my phone1 in asterisk server 192.168.0.9 and phone2 in asterisk server 192.168.0.6. Both are sip phones. i configured the extensions.conf file in both the server. the extensions.conf file on server 192.168.0.9 is exten=>301,1,Dial(SIP/301@192.168.0.6,20,tr) exten=>401,1,Dial(SIP/phone1,20,tr) 301 is the extension number for phone 2 in asterisk server

Hi, Actually on my setup all outgoing calls are going trhu a SIP unique account A have a second SIP account with another operator and I would like my setup to use alternatively each of the two accoutns Call 1=> Dial SIP/phone1 Call 2=> Dial SIP/phone2 Call 3=> Dial SIP/phone1 <...> If you have an sample please let me know

Hello everybody, I am sorry to bring this up again if this kind of echo issue has ever discussed. Phone2 in below call path experiences quite annoying echo: Phone1 --> FXS (TDM400P) --> Asterisk --> SIP GW --> PSTN --> Phone2 It is annoying as on phone2, we can hear the whole words we say with the level of maybe 25% of the original sound. I can reduce the echo to maximum with

Hi, all. The asterisk setup is working fine, receiving calls via broadvoice "initially". ? When call comes in via broadvoice number, asterisk picks it up and routes correctly, as long as the call came in within ~2 min from the previous one. In other words, as long as a call comes in within ~2 min since the previous one, asterisk will answer the call. However, if the call comes in

I am seeking to implement the following behavor: When a headset on phone1 is picked up, phone2 rings right away, without any need to dial numbers on phone1. Is this possible to implement? ScriptHead -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060120/0892441d/attachment.htm

What is the best way to create a drop down where the viewable text in a concatenation of 2 or more columns? For instance, I hane a lookup table with these columns. Model FOO columns: id , name, phone In my drop select tag, I''d like the user to see: "name1 phone1" "name2 phone2" etc.. I know I can do this using find_by_sql . .. But, isn''t there a more

Retrying, falling of the list some how :-( -------- Original Message -------- Subject: feeling n00b again Date: 2018-08-20 09:51 From: asterisk at a-domani.nl To: asterisk-users at lists.digium.com Hi all, Long time ago, I followed a Asterisk training, and both at work and at home, was able to deploy Asterisk, make all sorts of internal call (hard/soft voip-phones, incoming/outgoing,

I have 2 SIP phones (Cisco 7960 & XTen) behind a NAT provided by a Linksys firewall that supports UPnP. The Asterisk server has a public IP. Here are the problems that I am having with this configuration... 1. The 2 SIP phones can call MeetMe and have a conference but cannot call each other. (Yes, they connect but no audio either direction) 2. I have verify=yes in the sip.conf for both

hi. i have dialplan with 2 simultaneous calls - dial(sip/phone1&sip/phone2). when i cancel call on phone1 (push "reject" button), the call is still ringing on phone2 can i cancel call on both phones from one place(one phone)? thanks -- --------------------------------------- Marek Cervenka =======================================

All - I've been wrestling with how to best structure the sip device accounts on a new asterisk server I'm deploying. All of the sip devices (currently only Linksys SPA941s) will reside on the same subnet as the server, and I have already set up a decent automatic provisioning system for the phones. When the rollout is complete, there will be about 100 SIP devices authenticating and

I have been looking around some and I can't seem to find anything which will answer my question. If I have two Asterisk boxes in different locations which are linked to each other over the internet, can I configure the boxes to use each other's lines as local? In other words, let's say Site A has Phone1 for a 1FB line going into it on an FXO port. Site B has Phone2 for a 1FB line

Hello! I've upgraded from 1.2.9 to 1.2.14 recently but experience an unexpected behaviour with musiconhold: While in 1.2.9 musiconhold was playing continuous on sequential extensions after a timeout, it is restarted for every extension in 1.2.14: ;music starts exten => 902,1,Dial(SIP/phone1@proxy.com|5|m(mymusic)) ;music starts again exten =>

Hi, sometimes I have one way calls and noise between sip phones connected to the same LAN so no nat/firewall is involved. I tried with different sip phone models soft phones and the result is the same. I searched inside every log file but found nothing. I made different PBX with different hardware but the result is always the same. Is there anybody experiencing this terrible problem?