similar to: SendDTMF() behaves strangely

I have been trying to figure a way to SendDTMF into a MeetMe room using the Manager API. I can't redirect everyone into another context and then bring them back because that would mess up my logic. I am trying to use local channels and the originate Action to accomplish this. Exten: 3441115 Priority: 1 ActionID: actid-00000001 Context: senddtmftones Action: Originate Channel:

Hi all! I would like to solve some problems: I have a sip provider that lets me make pstn calls after listening some stuff and entering a pin number: 1) How can I make Asterisk enter the pin number? Then wait 1 second and enter the phone number? I have in extensions.conf: exten => 6*,1,Dial,SIP/2002@myprovider,60,tr I have tried with w (like with ZAP channels) but it does not work, nor

Hello all, I am trying to use asterisk to call a local access gateway by dialing a fix number, after getting connected, the is a IVR prompt for pin number and finally the real destination number. I manage to use asterisk to dial to the gateway but have no idea how to send the pin number and destination number. This is due to asterisk only process the next ext only if dial app has terminated. My

Hi everyone: The following code dials our prefix, sends a beep, and sends a DTMF "c" tone, then dials the phone number. I need to send the DTMF only if the phone is answered. [voip] exten=>i,1,NoCDR() exten=>i,2,Hangup() exten=>s,1,Wait(2) exten=>s,2,Background(beep||) exten=>s,3,DigitTimeout(6) exten=>s,4,ResponseTimeout(10) exten=>s,5,SendDTMF(c)

A call comes in and goes into the queue, the queue dials a sip channel using a macro. The macro plays a set of options to the callee and if the callee presses 3 it sets MACRO_RESULT=CONTINUE and the macro ends. For some reason the caller goes back into the queue rather than continueing on in the dial plan. Why is this, i could have sworn in 1.2 if i set MACRO_RESULT=CONTINUE that the

Hi list, We're trying to set up a phone number that customers can call to get a hold of anyone of a group of sysadmins (and not their voice mails!). We found the findme example ([1]) that makes the callees press 1 to accept the call. It almost works, but it doesn't work correctly when one of the callees, the sysadmins, hangs up after accepting the call. We're using this

Hi, I was woredering if you could help me to put into practice this solution. The idea: Create a IVR-Voicemail The scene: PSTN------/6------PBX--------/12--------- Internos | /4 ports | IVR-Voicemail The Operation: 1)Where a call enters from the PSTN, the PBX flashes and

Hello list, I'm using the following macro when calling an external callphone/GSM number : [macro-press1] exten => s,1,NoOp() exten => s,n,Playback(/var/lib/asterisk/sounds/prompts/press1) exten => s,n,Read(INPUT,,1,1,1) exten => s,n,NoOp(input : ${INPUT}) exten => s,n,GoToIf($["${INPUT}"=="1"]?exit:hangup) exten => s,n(exit),NoOp(call accepted) exten

I am following the example at http://www.voip-info.org/wiki/view/Asterisk+tips+findme but I find that no matter what, the call is connected. Can anyone confirm that config is working for them? Any suggestions appreciated. I need to transfer calls to a list of cell phones, ring all of them, allow them to screen the call, connect the call to the first number that accepts the call, and allow

Hi! I am trying to setup a simple queue in Asterisk and I'm having a small problem. Our callers come in through a Bosch PBX and are immediately transferred to an Asterisk menu/IVR. If they select the option to call a SIP phone directly (eg. entering the operator's SIP extension) then the callee/operator can transfer the call to a phone within the Bosch system. What Asterisk does is

I'm not sure why but my call is being ended when I SendDTMF(*). I'm using agi to originate a call and set the context,extension,priority to test,1,1 respectively. I've got the following in my extensions.conf: [test] exten => 1,1,Answer(); same =>n,Wait(5); same =>n,Verbose(1, Sending *); same =>n,SendDTMF(*,500); same =>n,Verbose(1, Sent *); same

This is a followup to the posting earlier about Hunt Groups with Call Screening. I have implemented the following macro and for some reason the Macro does not exit and continue the context it was called from when the called party rejects the call - It always drops through to the NoOp at the end and connects the call. Below are two examples of the dial commands I am using to call the macro.

I am using the Find-me/Follow-me example below with screening: http://www.voip-info.org/wiki/view/Asterisk+tips+findme Here is my actual config: [macro-screen] exten => s,1,Wait(1) exten => s,n,Background(press-1-to-be-connected-to-the-caller) exten => s,n,Set(TIMEOUT(response=5)) exten => 1,1,NoOp(Caller accepted) exten => i,1,Set(MACRO_RESULT=CONTINUE) exten =>

Greetings all, I've been working on having Asterisk put a call through to two different numbers, and give the call to the first one that acknowledges by pressing the 1 key. I found an example on the wiki, but I can't get it working. When I answer the call I hear the message telling me to press 1 to connect, and as soon as the message is done, the call is connected. In other words, it

Hi Here is my scenario Mr.X's Asterisk Box Dials Mr Y's Asterisk Box (thru Zaptel channels)after Channel establishment Mr. X send DTMf tones to Mr Y using by using application "SendDTMF()". My question is this is there any method that Mr. Y Saves these DTMF Tones in any variable (after converting back to their Corrosponding Digits). Thanking in advance Obaid

Hi List I have had a look at the various posts on this and seem to be more confused than ever - but then again that's not hard ;-) I am using Version 1.4.33.1 build from the Debian "lenny" distros I am trying to implement a simple screening [macro-screen] exten => s,1,Background(press1) exten => s,n,WaitExten(5) exten => 1,1,NoOp(accepted) ; Dont set a reply so dial

I am trying to make a dialplan that when I dial 90 I can go round a whole set of extensions and leave them a short message, hangup and go on the next one. I use the M facility of dial, with something like this [messages] exten => 90,n(calcnextchan),Set(DIALCHAN=...) exten => 90,n,Dial(${DIALCHAN},30,M(domessage)) exten => 90,n,Goto(calcnextchan) [macro-domessage] exten =>

I am setting up an after-hours on-call system. Someone calls in and requests service, and while they listen to music on hold, we dial out to several people's cell phones and home phones. We don't know if they will be answered by the employee, or by voicemail or a spouse/relative/child/pet. So we play a message that says "press 1 to accept the call" and ask employees to train

I've tried to transfer a call using the Flash command, but with my configuration it doesn't work. I have a traditional PBX connected with a zap channel to Asterisk that acts like an IVR: TELCO line --> traditional PBX (FXS) --> (FXO) Asterisk >From the TELCO line I can make a call to the traditional PBX and reach Asterisk, the IVR system on Asterisk answers the call and I can

I have a dialplan that requires that we use * to send the long distance access code to AT&T. I have found in the list that the `w` command can be used to inject a pause, I have tried the following: exten => _91NXXXXXXXXX,1,Dial(ZAP/g1/${EXTEN}www5555555,70) There `5555555` is the ld access code. I tried various quantities of `w`s but I never got * to dial the ld access code. Allof the