similar to: Nortel Option 11C and SIP gateway integration

Hi I want to connect asterisk 1.0.9 ( kernel 2.6.8-2 debian )with TE110P and Nortel meridian option 11c release 25.40 with NTBK50AA card which is An E1 card. But the main problem is the first stage that no sync occurs the * card never syncs with meridian card I am using euroisdn, ccs , hdb3, crc4 , pri_net on asterisk And I am assuming that meridian is using same as it is

We've been trying unsuccessfully to connect our Meridian Option 81C to a TE110P via PRI. We've followed the directions in asterisk-meridian-a1.pdf (link on http://www.voip-info.org/wiki/view/Asterisk+legacy+integration), but it doesn't seem to work on our 81C (even though many, many users report it works very well on Option 11's). Has anyone had any success in getting the above

Hello and happy holidays, everyone! I received the book "Enterprise Rails" by Dan Chak as a Christmas gift and started reading it; I wanted to gauge the community''s thoughts on this. Basically, Mr. Chak advocates a totally different approach to how every other Rails book/tutorial explains how to develop Rails applications. Firstly, he advocates you organize your

Hello R Folks, I am new to R. I have been struggling to overlay a barchart with a xyplot together on one plot but did not get this worked out. Any help and idea are greatly appreciated. I attached R scripts for barchart and xyplot below and also data I used. What I am trying to do is just to put the barchart and xyplot together on one plot. Huapeng <<dispersal_infestation.csv>>

Hi, I have asterisk running a single T1 card with a connection to a nortel CS 1000. All calls to extensions, local and long distance are working just fine. My issue is this: The nortel CS 1000 supports connections to and intercom system that is just line level audio to speakers. When my PRI tries to call this "extension" it is never answered so my AGI never runs to play a message

I completely agree with you. The source code I wrote here has the main function and is a complete code. That's why I was expecting load/store analysis could have been incorporated across the module. Thanks. On Fri, Jan 4, 2013 at 10:43 PM, Daniel Berlin <dberlin at dberlin.org> wrote: > I'm not sure what you mean by "use" check. > If you compile this with LTO and

We are currently working to trunk from a Nortel 81C to an Asterisk Server 1.4 running on Red Hat Linux. We have two PRI trunks which work with the exception of the clock slips, which is causing the Nortel to reset the PRIs once a hour. Thanks for any suggestions. 81C MSDL Asterisk Digium TE110P REQ prt TYPE adan dch 10

Thanks for your reply. So, we don't do any "use" check (for globals variables) beyond a module scope. If so, it answers my question. On Fri, Jan 4, 2013 at 6:53 PM, Justin Holewinski < justin.holewinski at gmail.com> wrote: > Since a, b, and c are globals, how does the optimize *know* they are not > used elsewhere (e.g. another module)? > -------------- next part

Hello, I have just started using llvm. I was trying to debug how *clang* generates IR for very simple C testcases (few assignments and if-condsitions). To get a hold on the basic functions, I put some break points on following functions but debugger *didn't stop*: llvm::BasicBlock::Create llvm::BinaryOperator::CreateAdd (design has binary op) llvm::Value::Value llvm::BranchInst::Create

Hi, I have recently upgraded from Asterisk 1.2.15 to 1.4.2 and I'm experiencing trouble with rx_fax. I have followed instructions posted by Sems: http://www.sems.org/entry.asp?ENTRY_ID=197 I'm using spandsp-0.0.3pre28 and the app_rxfax and app_txfax from: http://www.soft-switch.org/downloads/snapshots/spandsp/test-apps-asterisk-1.4/ rx_fax and tx_fax are both enabled via make

Hi there, One of our Asterisk 1.2 machine is experiencing problems with MeetMe. Whenever meetme runs, the console is flooded with warning messages: The messages started as "No such file or directory" and becomes "Resource temporarily unavailable". I couldn't figure out what file MeetMe might be looking for, could anyone help? May 4 08:57:38 WARNING[19032]:

Hi, Does anyone have any appropriate debian control files so that I can create a .deb package for FLAC? I don't want to just compile it and overwrite in case it gets automatically overwritten by the Debian package management tools. Cheers Andy

Hi All, I'd like to ask for a few clarifications. I am doing some calculations over some biggish datasets. One has ~ 23000 rows, and 6 columns, the other has ~620000 rows and 6 columns. I am using these datasets to perform a simulation of of haplotype coalescence over a pedigree (the datestes themselves are pedigree information). I created a new dataset (same number of rows as the pedigree

I'm not sure what you mean by "use" check. If you compile this with LTO and multiple modules, and guarantee that you have the main function, yes, you could optimize this. In all other cases, it's not possible to eliminate any of the remaining loads or stores you see, because you have no guarantee about what else could read it. Heck, a conforming implementation of printf could

Can anyone work out why my callerid doesn't work on my isdn4Linux with asterisk (or without asterisk for that matter)... This used to work fine, and I am quite confident that the telco is sending callerid information (because they always do on all ISDN lines standard, only extra cost on POTS lines). This is the information from dmesg, whether asterisk is running or not: isdn_net: Incoming

I've googled / voip-info'd / searched until my eyes are blurry, but couldn't see the info I was looking for. I've turned here for help! Asterisk CVS head (9/7/04) Fedora Core 2 (updated to 2.6.6 kernel) DE405P (jumpers set to E1) I want to put asterisk in the middle of our current pbx (Meridian Option11) Currently the meridian has a 2MB pri EuroISDN card linked via a rj-45 into

I've tried to do it myself, but my head is now bleeding from hitting it on the wall so much. We need someone who knows asterisk and Meridian PRI cards to help! If required, we will pay for a day's consultancy in order to get this thing working. Or, do I need to scrap my plans to keep the meridian system (60 phones ...) ... Please say no .. :) Please contact me offline

Hello, I was trying to run few testcases and see how llvm optmizes different scenarios. I have a small testcase like: #include <stdio.h> int a, b, c; int main() { a = b + c; c = a; if (a == b) b = c; else b = a; printf( " a = %d \n ", a ); return 0; } The corresponding llvm IR is ( clang test.c -S -emit-llvm -o -

Hi. On all of my machines, except for a netbook cursed with the GMA500 chipset, the R packages are synced to lenny-cran. I have been using rpy in a chroot using the official lenny R packages (2.7.1) given that i have not been able to find compatible rpy deb packages to work with lenny-cran. I am able to build the rpy deb package from source in a 32-bit lenny chroot (with the stock R packages)

Hi, I have done my best and tired of searching the net about the problem. If anybody could help would be a great favour. Description of Problem ------------------------ I am trying to install two Netpci cards(Traverse Technology Netjet ISDN-s) on Trixbox 2 and aim is to use in Asterisk as dailin and dialout. I compliled the driver as directed in the manufacture manual. After installation dmesg