Displaying 20 results from an estimated 6000 matches similar to: "How do i redirect a call without answering it? SIP channel"
2004 Nov 16
1
Capi Deflection (CD) not working
I did the following:
- chan_capi-0.3.5/Makefile: uncommented CFLAGS+=-DDEFLECT_ON_CIRCUITBUSY
- recompile asterisk + chan_capi
- added /etc/asterisk/capi.conf: deflect=0800123456 ; some 0800 test number
- in etc/asterisk/extensions.conf under [tcom-in]: exten =>
98765,1,capiCD(0800123456)
- made both b channels busy by outcalling on both lines (ISND BRI)
- called my msn (98765) by mobile
2005 Sep 29
4
chan_cap-cm-0.6 deflect support
Hi,
I've recently reinstalled a Diva in my asterisk server (alongside a
QuadBRI :-) to test the nice features Armin has been adding in
chan_capi.
The capi.conf format has changed, so my question is how do I define a
deflect= statement for different incoming MSN's?
I've tried to define a section for each (group of) MSN with a different
"deflect". Is that correct?
[DIVA1]
2006 Feb 28
1
Q: Status of feature Call Deflection / Partial Rerouing in chan-capi and zaphfc
Hello,
AFAIK the feature CD (call deflection) is only possible on
point-to-multipoint links, is this correct?
I've heard about the feature "partial rerouting" which should do the
same on point-to-point-links. Is this implemented in either bristuff or
chan-capi(-cm)?
Thanks in advance,
Karsten
2004 Mar 30
2
CAPI problems when loading chan_capi.so
Hi all,
I compiled/installed chan_capi.so without problems. When I launch
Asterisk, I get the following error:
---
[chan_capi.so] => (Common ISDN API for Asterisk)
== Parsing '/etc/asterisk/capi.conf': Found
Mar 30 19:47:52 NOTICE[16384]: chan_capi.c:2338 mkif:
ast_capi_pvt(91xxxxxx,*,pstn,0x2,2) (1,2,64) (0)(0.800000/0.800000) 0
Mar 30 19:47:52 NOTICE[16384]: chan_capi.c:2338
2005 Aug 24
2
Error when answering CAPI
Hi,
I've a Fritz card which was working fine, recently I changed
hardware and my nightmare started. Now when I call someone through the
chan_capi (0.3.5 or 0.4.0) it works fine but when I receive calls I
always get hungup. Can someone please give some help? Here are the logs:
*CLI>
-- CONNECT_IND ID=001 #0x0000 LEN=0049
Controller/PLCI/NCCI = 0x101
CIPValue
2007 Jul 14
4
Zaptel/mISDN and call transfer
Hi list,
I am searching for a possibility to do a certain call transfer method
which is called "path replacement" in QSIG. But I want to do that in
DSS1 (EuroISDN). If my asterisk does a call transfer I want the machine
to signalize on dchan that the call path has to be replaced to a direct
connect between the caller and the called, i.e. my machine is to hang up
after the transfer and
2004 Dec 23
2
Re: Asterisk and Capi
Dear list,
I tried to install the CAPI support RPM from the SUSE 9.2 disks. YaST
tells me it is happy with the process. The Asterisk release I am using is
the one that comes packaged in RPM format, also included in the distribution.
Still starting asterisk with the usual asterisk -vvvc I see that
something goes wrong.
[app_capiCD.so]Dec 23 19:21:45 WARNING[1076850816]: loader.c:242
2006 Feb 23
1
chan_capi-cm 0.6.4 random outgoing MSN problem
I've having a big problem after having upgraded to 1.2.4 and
chan_capi-cm 0.6.4
When making outgoing calls I don't seem to have any control over the CLI
that is presented to the called party -- it can be any one of the MSNs
allocated to the line, allocated on what seems to be a random basis.
This is on a BT Business Highway line (which is essentially an ISDN2e
line with two built-in
2006 Feb 21
1
Setting up an EICON CARD with CAPI
Hi everybody.
I'm trying to setting up a V4 BRI EICON card on ASTERISK 1.0.7
My linux is a debian.
It was working during a few days an suddenly (after a lot of reboot)
I've got this error message that seems to be very popular but I couldn't
find any
answer on the net :
==============================================.
Asterisk Dynamic Loader Starting:
== Parsing
2004 Nov 27
2
capi question
hi,
I've been running a pure sip asterisk box for a while now with no
problems, and i've recently added an isdn2e line from bt in the uk.
everything is hooked up and i've got it ringing my sip extensions, but
the logs don't quite look perfect and i can't see any description of
what i should consider to be normal behaviour.
would someone be able to look this over and tell me
2005 Sep 29
1
chan_cap-cm-0.6 is not working for incomming calls
Hi,
I tried to use the version 0.6 of chan_capi-cm for outgoing calls it
works perfectly but for incoming calls it will not work:
--- snip ---
*CLI> capi debug
CAPI Debugging Enabled
-- CONNECT_IND
(PLCI=0x101,DID=97,CID=0179903xxxx,CIP=0x1,CONTROLLER=0x1)
== reventix: Incoming call '0179903xxxx' -> '97'
-- reventix: info element CALLED PARTY NUMBER
--
2005 Feb 21
1
Problem with ISDN Dialin via CAPI
Hello List,
because this is my first post to this list, i'd like to introduce myself.
My name is Thorsten M?ller, 26 years old and live near Frankfurt/Main in
germany.
Okay, now to the reason for this posting:
I just installed my first asterisk server (Debian 2.2 Kernel 2.4.18-686)
with AVM ISDN Fritz PCI card (passive).
I followed the configuration on http://voip-info.org and the
2005 Jun 28
1
AVM CAPI INSTALLATION
I use AVM fritz card A1, I have install with instruction of
Voip-info.or, but it don' work.
capiinfo
Number of Controllers : 1
Controller 1:
Manufacturer: AVM GmbH
CAPI Version: 2.0
Manufacturer Version: 3.101-02 (49.18)
Serial Number: 1000001
BChannels: 2
Global Options: 0x00000039
internal controller supported
DTMF supported
Supplementary Services supported
channel allocation
2004 Dec 17
1
chan_capi - avm card does not work
Hi,
I added a Fritz!PCI card to my asterisk system which is running on fc2
!.
I installed the avm modules (fcpci) and when i try an capiinit and a
capiinfo then everything seems to be OK (you can see capiinfo and lsmod
at the end of the text) !.
I installed the asterisk chan_capi module and when i start asterisk and
enter the command capi info on the command line i get back:
*CLI> capi info
2004 Dec 03
1
CAPI Newbie
Hi everyone,
Hi, I am new to the ISDN world, today I received my new NT box from
CS Telecom but unfortunately it doesn't work. I have installed all the
drivers and when I issue a "capiinfo" I get:
--------------------------------------------
Number of Controllers: 1
Controller 1:
Manufacturer: AVM GmbH
CAPI Version: 2.0
Manufacturer Version: 3.101-02(49.18)
Serial Number:
2005 Sep 28
2
chan_capi-cm, Euro ISDN bus: 2 extensions on same BRI port not working
Hello,
I am using a system with an AVM ISDN PCI card (fcpci) and asterisk with
chan_capi-cm-0.6. The hardware is connected to a Siemens Hipath 3550 PBX. As
a BRI connection has 2 channels and allows 2 simultaneous calls,
numbers/MSNs 6391 and 6392 were for provisioned for each channel. The system
is working (partly, read on), the trick is the correct cable wiring and
setup the PBX's port
2007 Mar 22
1
Problem in using Two BRi Cards in Asterisk
Hi,
I have done my best and tired of searching the net about the problem. If anybody could help
would be a great favour.
Description of Problem
------------------------
I am trying to install two Netpci cards(Traverse Technology Netjet ISDN-s) on Trixbox 2 and aim
is to use in Asterisk as dailin and dialout. I compliled the driver as directed in the manufacture
manual. After installation dmesg
2003 Sep 14
6
chan_capi
Hi chan_capi users,
this thing is awesome, no delays like in modem_i4l!
Plus, it got those nice ISDN features.
Here's my question:
Does my service provider (Deutsche Telekom) have to provide me with
these Services (CD, ECT)?
(the Readme in 0.2.5 says "does not relay on service CD")
I know, that I don't have CFU,CFNR,CFBS (which I would have to order
seperately).
How likely
2004 Aug 26
6
chan_capi module
Hello!
I have tried to compile the capi module
(http://www.junghanns.net/asterisk/downloads/chan_capi.0.3.5.tar.gz) on
fedora2 today.
----------- MAKEFILE --------------
..EXPORT_ALL_VARIABLES:
INSTALL_PREFIX=
#ASTERISK_HEADER_DIR=$(INSTALL_PREFIX)/usr/include
ASTERISK_HEADER_DIR=/usr/include/asterisk
#MODULES_DIR=$(INSTALL_PREFIX)/usr/lib/asterisk/modules
2007 Jul 30
2
Strange ISDN Troubles
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Ahoy
I'm trying to setup Asterisk on debian etch (with the debian packages)
with a "Fritz!Card PCI" ISDN card and chan_capi.
Everything seems to be configured the right way (excerpts below),
Asterisk seems to see the ISDN-card but if i try to place a test-call
from the outside i don't see anything on the asterisk-console (set debug