similar to: Grandstream HandyTone-488 with Asterisk ?

I have problem with fax machine Panasonic DX600. It's connected to Grandstream Handy Tone 386 which is connected to Asterisk. Asterisk is connected to my SIP provider. To some numbers I can't send FAX, and I get following error on CLI. WARNING[2237] chan_sip.c: Unknown SDP media type in offer: image 31358 udptl t38 I believe that Panasonic DX600 machine supports T38. And when I have

Hello, I bought a Grandstream Handytone 486 to forward incoming calls from our old analogue PBX to the asterisk server. My first test was connecting an analogue phone to the Handytone and calling a sip phone - worked. Now I used the same cable to connect the line port of the Handytone to the analogue pbx. When I call the number of the analogue PBX I hear a clicking inside, but the call

can someone who has a grandstream handytone 488 working with making outgoing calls through the fxo port please post the parts of their config that deal with this port? i cant quite seem to get it to make outgoing calls despite having tried several completely different ways of making that happen. i have been told that asterisk@home has this built in to just a button hit, but i dont want to

This is one long letter about T.38 and Asterisk. I hope it will help me, and lots of other Asterisk users to understand some T.38 problems with Asterisk. This is my situation: I have Panasonic DX600 FAX machine. It's connected to Asterisk 1.2.13 thru ATA adapter (I have used both, Cisco 186 and Grandstream HandyTone 386). Asterisk is connected with my SIP provider. That link that my provider

I have running * without any Digium (or any other) hardware. Now I need to connect analog FAX machine to it. I think that cheapest and easiest way is to buy ATA. Please correct me if I'm wrong. Now, which ATA should I buy? Local dealer sells those four. I can buy something else (if there is any reason for it), but I prefer something of this. One more question, can I plug two lines in any of

I am trying to get the handytone 286 to make a very simple call to * and having problems. It registers with * just fine, but when I place a call (to echo test, for example), the RTP stream seems to have problems opening. Here is there error I get in *: WARNING[98311]: File chan_sip.c, Line 464 (retrans_pkt): Maximum retries exceeded on call 20d1c411-e210-5f3d-3f88-19035c8fcb26@192.168.2.6 for

Hi people, pls does anybody know what "(T)" and "(D)" letter means? server3*CLI> iax2 show peers Name/Username Host Mask Port Status SERVER1 xxx.xxx.xxx.xxx (D) 255.255.255.255 9785 (T) OK (29 ms) SERVER2 xxx.xxx.xxx.xxx (D) 255.255.255.255 4569 OK (95 ms) 2 iax2 peers [2 online, 0 offline, 0

I have an analog Fax machine which I wish to connect to the network and the Asterisk server. It will connect through a GS Handytone 286 converter and then into the LAN. Is there any information out there on what I need to write in *sip.conf* and/or *extensions.conf* to make sure the fax works as a fax? Channel 8 on my T1 is a reserved, dedicated line for the fax number. Do I need to

I'm considering a situation where I buy about twenty ATA devices. I've played with the Linksys / Cisco PAP2T, and got that working fine with some inbound and outbound faxing. The web GUI was okay. I'm seeing prices around $45 to $50 for this thing. It comes with two FXS ports, but I only need one FXS. I've seen the Grandstream Handytone 286 online. It looks promising as an

Hi I have a analog phone connected to my Gateway Handytone and registered to Asterisk 1.4 I have configured my HandyTone 488 (in the section FXS Port) for make and receive calls, however I can not transfer a call when it come via PSTN. But, when a call come from via IP I can transfer it. [phoneanalog] type=friend secret=XXXXXXX context=local nat=no qualify=yes host=dynamic dtmfmode=rfc2833

I am seeing the following in my log file (standard trixbox install). One seems to be complaining about an error in the dialplan but it won't tell me what file or what line. The other (maybe related) is complaining about a channel lock. How to do go about trying to figure out what the problem is and how to solve it? ---------------Logfile-------------------------------------------- Nov 14

Does anybody have Digium TE212P interface card on Dell PowerEdge 1850? I'm planning to install * on that configuration so I'm looking for any positive/negative experience. Best regards, -- Tomislav Par?ina Lama Computers Split Stinice 12, 21000 Split Tel.: +385(21)270248 Mob.: +385(91)1212148 SIP: tomo@sip.lama.hr e-mail: tparcina#lama.hr http://www.lama.hr

Hi, Just received recently released Grandstream handytone 286 ATA for testing. I can call ATA from any other extensions and conversations seems to be of quite good quality. However placing calls from ATA is not possible at all to any extensions. After dialing there no indications of any kind from ATA at all. It just "hangs in there". ATA is behind NAT, registers to an * with public IP

Hi ; Have two handytone 486 and want to use them as digium TDM400 fxo-fxs card... I mean is it possible to direct pstn calls from astersik (extensions) to handytone line port directly and vice versa ?... Thanks in advance Betul Onemli not : Bu e-mail iletisi, sadece adreste belirtilen kisi veya kurulusun kullanimini hedeflemekte olup, mesajda yer alan bilgiler kisiye ozel ve gizli

Hi Folks, I would like to recover all information about the calls, incoming calls, call time, call history, etc in a Web Format, are there some open source aplication for Asterisk that be easier for use. Pls anything suggestion will be very appreciate. Thanks Rgds. -- Omar E.P.T ----------------- Certified Networking Professionals make better Connections! http://omarept.blogspot.com/

There seems to be a problem related to the Grandstream HandyTone-286. When a call is placed through the adapter, the call can be transferred. However, when a call is received through the adapter, the call cannot be transferred. The problem does not exist with a BudgeTone-101 (1.0.4.23) using the same Asterisk configuration and Dial() settings (Ttm). I tried all of the firmware on their BETA

Hello, Has anyone gotten a Grandstream BT100 to work with Level 3's 3Tone? I've been able to get my extension to interface with it, but there is no sound and the call on the GS side terminates prematurely. Here is the relavent portion of the SIP.CONF [4007] ; Budgetone BT100 type=friend insecure=yes context=test-budget username=4007 fromuser=4007 callerid=4007 host=dynamic nat=yes

Greetings, I am cutting my teeth with SIP phones and my first issue is getting a Cisco 7940 to Authenticate with my VoIP provider (BBTelsys). I did read some notes on the vo-ip website about 7.5 being the better firmware version. Has anyone had trouble with 8.2 and SIP registering? Should I just downgrade to 7.5 and give it a go? I think SIP uses UDP 5060 correct? The phone is behind a

Hello, We have several regional asterisk's connected to a central one making the the PRI calls through a TE410P card. When using SetCallingPres(prohibited) on a call at the regional level, that setting it not forwarded to the central asterisk and the call is made as if no callerid had been sent: the telco substitutes the network number. Using SetCallingPres(prohibited) on the central

Hello, I'm trying to configure Asterisk and my Handytone 488 to pass incoming calls coming over PSTN through the FXO port to Asterisk, which will process the calls with voicemail, or some such service. I point the Handytone 488 FXO port configuration to 192.168.0.2 (the machine that is running Asterisk) and have configured a catchall extension to receive the call: [from-pstn] exten =>