similar to: Two Sipura 3000s

Hi, I have a Polycom 501 that is currently unusable because I started a firmware and sip upgrade that I can't complete. The Ubuntu box address is set static at: 192.168.1.101. The phone address is set static at 192.168.1.51. The phone settings for the server menu are: Server Type: Trivial FTP Server Address: 192.168.1.101 Server User: PlcmSpIp Server Password: PlcmSpIp (not sure what it

I am considering using Sipura-3000s as FXO devices for my * system. Has anyone tried them in that configuration? They interest me because they need no PCI slots and therefore no drivers. I would much prefer not to have any special kernel requirements for my system. /carmi

We've been happily running Dovecot in Solaris 10 for about 8 months now. Yesterday, Solaris 10's SMF put it in maintenance mode (shut it down) seemingly out of the blue. The only thing going on was that I had updated the ssl certificate. We had previously been using a self signed cert. Now we have a cert from InCommon. We had a problem with a few users who are still on ancient Eudora

Does anyone know about this device? SESX3Y11Z 32 GB 2.5-Inch SATA Solid State Drive with Marlin Bracket for Sun SPARC Enterprise T5120, T5220, T5140 and T5240 Servers, RoHS-6 Compliant This is from Sun''s catalog for the T5120 server. Would this work well as a separate ZIL device for ZFS? Is there any way I could use this in a T2000 server? The brackets appear to be

Dears; I do not know if any had experience in using speex or ilbc with IAX and got good results, because I am facing a problem with GSM. I am facing a noise problem when I am using GSM with IAX trunk as following: IP Phone (G711) ---> Local Asterisk Box ---> IAX Trunk using GSM codec ---> Remote Asterisk Box ---> Digium Card (FXO) to terminate the call to the destination While no

Hi List; I heared that IAX is good for NATing issues, but I do not know if it can help me in that senario: I have two Asterisks machines in different sites and both are behind NAT (both have private IP address), I need to link these two asterisks with IAX trunk (if it help really in such senario), but I do not know if it will work without doing special routing settings on the router (like

Howdy, I am trying to run a Cobol Compiler through wine. I am running RH7.3 with a current wine release. My directory structure is /usr/share/wine-c/COBOL/. I have been successful in running other applications through wine, but not ones that require a PATH= entry. My problem is: it's looking for an entry in the PATH environment variable that includes 'C:\COBOL' which stores

describe MyController do integrate_views describe "A common base senario" do it "no longer integrates views" do be_careful end end end integrate_views affects an attribute in the class formed by the describe factory method. The second describe generates its own class, so integrate_views is OFF at that level. I''ve already spent far, far too much

My data is the following: Time Resistance Temperature 5 2000 4 10 2200 8 15 2500 14 20 2900 20 25 3000 29 30 3100 38 35 3500 46 40 3800 47 45 3900 50 50 4000 51 I would like to create a scatter plot with Time on the x axis, Resistance on the y axis and Temperature on a second y axis. I have tried Plot(Time,Resistance,ylim=range(0,4500)

Hi, I am just a little confused of mian effect in the analysis of variance (ANOVA) when you include or do not include an interaction term. Let's assume a simple case of 2-way ANOVA with 2 factors A and B, each with 2 levels. If it shows that main effect for A is significant when the interaction between A and B is NOT included, and the main effect for A is NOT significant when the interaction

Hi All, We are using group paging and our asterisk version: 1.4.22.1, but when ever any one page to the whole group (28 extensions), the calls which are on hold on those extensions will be dropped, is there any other way to have this feature or to go with Overhead paging. Currently this has become a serious problem, can anyone through some light on this group paging senario? Thank you very much

Trying a different approch. Senario Raid 1 setup Bootable raid drive failed Mirror has been working for almost a month and then rebooted Now can't boot mirror drive grub not mirrored from other drive. I Fixed bootable drive. Question? Can I hook up both drives and boot fixed drive then rebuilt mirror from nonbootable drive to bootable drive? Does the raid automatically rebuilt when I

Hi- I'm wrestling with some of my data apparently not being called into a GLM or an LM. I'm looking at factors affecting fish annual catch rates (ie. CPUE) over 30 years. Two of the factors I'm using are sea surface temperature and sea surface temperature anomaly. A small sample of my data is below: CPUE Year Vessel_ID Base_Port Boat_Lgth Planing SST Anomaly 0.127

Hi, Not sure exactly how I would word the subject line so appologies in advanced. We are trying to accomplish the following scenario: Location 1: PDC: fs01.loc1.example.com IP: 10.0.0.1 Location 2: SDC: fs01.loc2.example.com IP: 10.0.1.1 Clearly when we join the SDC to the PDC there is a naming conflict. The end result would be to have clients at each site resolve the fs01 name to

Hello All, Anyone here has experience of accepting a ilbc call and sending it on g711 or g729 I am having problem in VOICE , call goes though but there is no voice. Senario: Call is coming in from Machine A to Machine B, sending to Machine C Machine B is an asterisk box, transcoding it from IBLC to G711 and g729. Problem: Voice is not appearing on the sip user sitting on machine A Already

I have three columns of data, Xc, Trt and fish. This was a repeated measures design with 6 measurements taken from each of 5 fish. Xc is the actual measurement, Trt is the treatment, and fish is the fish number. Data can be seen below (hopefully it is in the column format). I would like to look for differences between treatments in a repeated measures format. I used the following code

Hi This is what I like to be able to do. 1. Computer boot on LAN, using PXELinux. 2. If the computer is booting for the first time it sends MAC adr, RAM, size of harddrive and name of videocard to a shared folder on a computer, maybe a server, that is attached to the network. 3. If this is not the first time it scan for a new task, could be a new ghostimage or an unattended installation of a

I want to setup a senario in which the callers hears to some music file while the phone is ringing and as soon as the line is answered the music is stopped palying. i.e. instead of the rings the caller listens to some music. Is is possible with asterisk? Kindest Muhammad Muzzamil Luqman -------------- next part -------------- An HTML attachment was scrubbed... URL:

Senario is There are 2 asterisk servers 1FXO ports connected to Panasonic PABX on extension 100 on server 1 If someone dial 100 from extension 101, call comes in on ZAP/1 call Dial,IAX2/xxxx on asterisk server 2 and from server 2 Dial/SIP/xxxx, now problem is if SIP/xxxx want to transfer this call to extension 102 then what will be the solution ? rgrds Fregi -------------- next part

Hi All, Today I faced a problem with channels getting stuck. We use asterisk 1.4.18.1, and there were 2 extensions (channels) that got stuck. When I try to do "soft hangup <channel>", it says "Requested for soft hangup" for that channel, but if we go and check once again those channels are still stuck. Also even after asterisk restart it did'nt go, finally we had to