similar to: Asterisk and Siemens C450IP

Hi everybody. I know maybe this question has been posted some time ago, but I need your updated opinion on the subject. I'm replacing our old pbx with asterisk. I have two TE207 dual pri (e1) cards on a clustered system (one on each node). I absolutely need to connect 4/5 analog extensions with modems, they're being used for remote assistance on very old systems which cannot be upgraded

Hi. I'm running some asterisk boxes on different sites, some equipped with a couple of ZapHFC cards, others with Junghanns quadBRI cards. All boxes were compiled with Asterisk 1.2.10 (libpri 1.2.3 zaptel 1.2.6) and bristuff 0.3.0 pre 1s, distribution is Fedora Core 4 with kernel 2.6.17.3 The cards are connected to Telecom Italia's NT1/NT1+ S/T lines; some of them are point-to-point,

Hi everybody. I am in the following scenario: 1 Customer "A" calls an asterisk box over a Zap channel on a toll free number during night time 2 The incoming call enters an AGI script on the dialplan 3 The AGI script plays back a welcome message, then starts the music-on-hold stream 4 The AGI script originates a calls to a stand-by operator's cell phone (operator

Hello everyone. I know it's a little bit off-topic, but I was just wondering... Has anyone ever had any experience with asterisk, a wi-fi meshed lan (with more than one access point) and wi-fi sip phones? I made some tests but I'm not really satisfied.... Wi-fi phones are a curse (as far as I know even Nokia eSeries -I personally own an e70 model- have their flaws): - random sip

Hi. I'm trying to develop a module that emulates the Cisco Extension Mobility feature from CallManager (the ability to log in to a phone and temporarily acquire the extension, soft key programming, and all other settings for that user profile) with Asterisk 1.4 and Cisco 79xx phones (some with SIP and some with SCCP, as the 7914 extension module does not support SIP). I've almost

Hello. Once again, I came up with a problem for which I can't seem to find a solution. I'm not able to make BLF work with Thomson ST2030 phones and Asterisk (1.2.13). I've set up hints in dialplan, as well as Subscibe keys on the phone. The LED status gets updated according to the associated line status. However, when a phone is ringing, If I try to pickup the call by pressing the

Hi. Does anyone know about a simple one-fxs ATA with pulse dialing support that can work with Asterisk? A SIP one would be ok. I've been told that the Digium S101i IAXy does support pulse dialing; although it's a iax2-only ata it could be enough. I need a bunch of them to convert some old fashioned rotary phones into VoIP ones (I'd like to disassemble the ATAs to remove the boards

I know in advance maybe I'm overlooking something stupid, however I'm really lost and cannot find the solution... Situation: - asterisk-1.2.13 on a linux box with no iptables active. - one iax2 peer defined - one wildiax phone running on my laptop the soft phone is configured to connect & register on asterisk, however, I cannot get it working. What am I missing? Please help!!

Hi. I'm stuck into an odd situation. Here's what happens: 4 Thomson ST2030S 2 Cisco 7912 3 Cisco 7940 2 AAstra 480i Asterisk 1.2.17 Diva 4BRI + chan_capi I've just upgraded yesterday from Asterisk 1.2.13 to 1.2.17. Until yesterday, everything was just fine with 1.2.13. Immediately after the upgrade, *all* the 7940 are no more able to make calls, just receive them, while 7912

Hi all. We have Snom phones which do have a defined key in order to drop incoming call WITHOUT answering. Pressing that key, a "SIP/2.0 486 Busy Here" message is sent back. We have other phones (I.E. DECT Siemens C450IP, or ATCOM 320 or other) which DO NOT have any key to do that (or the key does not work, as is with Siemens C450 IP ): you have to answer and immediatly after hangup the

Hi, I'm using Asterisk 1.2.18 on a Debian Etch box. I've noticed a very strange fact which causes a bad prob. When I get an inbound call, I make 4 phones ring at the same time, one is a Snom while others are Gigaset C450IP with _latest firmware_. When I get a call and answer with the Gigaset, a second call going to voicemail makes the first call received on the gigaset C450IP stop

Dear all, I'm using the ellipse package and I would like to verify if the confidence region that I build with this package can be equivalent to an Union Intersection Test. I used different value for the t-statistic but I can not find the right equivalence. Does someone know how to choose the right value? Thanks a lot. Antonio -- Antonio Lucadamo, Dipartimento di Scienze Economiche e

The Asterisk Development Team is pleased to announce the release of version 1.2.11 of Zaptel. This release includes a small number of fixes, primarily to support recently updated hardware products from Digium. It also contains a very large XPP driver update from Xorcom for their Zaptel-compatible products. Thanks for supporting Asterisk and Zaptel!

The Asterisk Development Team is pleased to announce the release of version 1.2.11 of Zaptel. This release includes a small number of fixes, primarily to support recently updated hardware products from Digium. It also contains a very large XPP driver update from Xorcom for their Zaptel-compatible products. Thanks for supporting Asterisk and Zaptel!

I am trying to use the Gotoiftime CMD to not allow calls to be placed between the hours of 12am-5am, except if you know the PIN number to dial out and if the call is for 911. What is the best way to implement this solutions? I have the gotoiftime like so: exten => s,1,GotoIfTime(5:00-11:59|mon-fri|*|*?custom-blacklist,s,1) and using Read for the PIN like so: exten => s,3,Read(Secret,,3)

Hi, Does such card exist ? It seems all existing models are designed for PCI buses. Regards -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20080201/b449b98e/attachment.htm

Hello, I need to connect one diva server 4bri to a portuguese BRI interface. The operator (PT) said that this bri is in point-to-multipoint mode (S0). Previously one PBX has connected to that interface. The asterisk and diva drivers are working ok but i cannot communicate to outside via this bri. Xlite gives me the message: "call failed: declined". Anyone have experience with this

Hi all. I have enabled the attended transfer feature in features.conf. I'm using it and I want to resolve some questions, I hope someone can help me :) When I transfer a call to an extension: - The extension rings during 15 seconds and the call returns to the "transferer". Is there any possibility to recover the call before the timeout of 15 seconds expires? I mean, I would like

Hi, Anyone here has any experience with the Nokia E70 and asterisk ? I read on the nokia website this phone is capable of talking SIP and do Presence based on SIP/SIMPLE. Please share your experience, I'm thinking of getting one but want to be sure I can use it with * before I do. Thnx. -- Michiel van Baak michiel@vanbaak.eu http://michiel.vanbaak.eu GnuPG key:

I'm preparing to deploy a small number of Grandstream BT101's and GXP2000's to a remote location (which I won't have access to). I'd like to have them pull a config file from my server - I'm almost there... The phones are looking for the config file on my webserver which is good. I need to generate that file however. I see a tool on the GS website to generate