similar to: simple dialplan trick I can't figure out (smdi, mwi substitute)

We have recently pulled an ancient Fujitsu-branded Centigram voicemail system out of production use and replaced it with an Asterisk box, which is now serving as our enterprise voicemail system and automated attendant. The Asterisk system is connected to a Fujitsu F9600 PBX and uses the 1.6.1.x SMDI module to communicate between the two systems. Save for one issue, the replacement of the old

An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040331/c2abf19f/attachment.htm -------------- next part -------------- Hello, Is there any work in progress for supporting SMDI in Asterisk ? if Not, could anyone tell how to get started implementing it for Asterisk. Regards, Tony

Hi, I'm a brand newbie to asterisk trying to set it up for the first time and I can't get a softphone to connect, the connection times out. I had a trixbox pro install working, but I need more control and would like to learn to do it with asterisk. In /var/log/asterisk/messages I see: WARNING[17401] res_smdi.c: No SMDI interfaces are available to listen on, not starting SMDI

Hello: I've been wrestling with an integration issue for which there also seems to be one piece missing. I'm hoping someone on this list can help. Due to a complete lack of cooperation from our current voice provider we are in need of an alternative way to access our Octel 350 voicemail system from our SIP (SER) proxy. I can redirect and relay calls to numerous destinations via

I am the one that placed the bounty. After it being there for 2 months and getting no takers (and very few if any people asking about it), we are almost finished writing it in house. I'll keep the bounty up untill we do finish our product so if anyone beats us to getting it working they'll get paid... W. Kevin Hunt CCIE #11841 MCSE, Linux+ SME www.huntbrothers.com >

Hello! I'm integrating an Asterisk-based voicemail system with an old switch, and I want the call history from SMDI. My understanding is that the terminal number in the SMDI message matches the channel's trunk number. >From within an Asterisk app, how do I get the trunk number? Thanks! Nate

Last question for the day, I promise. On voip-info.org and trixbox.org, I found some old threads on MWI via SMDI. Has this been rolled into Tbox or has anyone successfully rolled it in after the fact. As part of our longterm plan, I'd like to move the legacy PBX to Tbox and pass MWI back to it via SMDI, like the current system. As we drop the extensions on the legacy side and move to all IP

Does anyone know if Asterisk can function as a voicemail system for a Nortel Option 11 PBX? We will be connecting Asterisk to act as an IVR before sending calls to the Nortel and as a Voicemail system in case the user does not answer. That part is trivial, the only problem we have is that the customer wants the Voicemail light on the Nortel phones to light up when a user gets a new message.

Hey everybody, I've just spent the last two hours Googling and searching the Wiki. I'm trying to find if there are any listings of codes for the Avaya Definity G3R, to allow for an Asterisk system to turn on/off a phones MWI that is attached to a G3. We are looking to use an Asterisk system as a voice mail server. I'm not having any luck, anybody have such information? Thanks,

Before I go and try to write something myself, I'm curious if anyone has a script that they're using for setting and clearing the MWI on a legacy PBX. I need to pick up a Zap channel and dial #63XXX to set the MWI, or #64XXX to clear it, where XXX is the extension number. One complication is that I've got a couple dozen extensions to handle the MWI for, and only four channels to work

Hi, I''m getting a conflict between the Mocha plugin and the Rails SimplyHelpful plugin. For some reason the dom_id method from SimplyHelpful is not being found in my views when the Mocha plugin is installed. The dom_id method if used in the controller works properly. This is the error I get when running the tests: 1) Error: test_truth(HmmControllerTest):

Hi, I am trying to create a vpn with tinc on three windows machines.. Tinc starts listening on 0.0.0.0 port 655 Virtual adapter is connected, no problems there In the conf file are two connect to's : Name = red ConnectTo = duke ConnectTo = optimus Interface = VPN In debug mode, tinc reports: tincd 1.0.4 (May 4 2005 20:55:25) starting, debug level 5 Tap reader running

Steve Blair writes > I can redirect and relay calls to numerous destinations via >SER but because the Octel needs an SMDI interface for mailbox >identification I am stuck, none of the solutions thus far support >SMDI-SIP munging. > > I just started thinking about the possibility of using Asterisk >with a few FXS cards to provide the gateway between SIP and >the Octel.

Hello, It appears there is a limit in the number of criteria that can be put into the Aggregate sum function. (It looks like it is 32). My code is; HSfirst=aggregate(count,

Greetings, The Asterisk.org development team has released Asterisk 1.6.0-beta5. As of this beta of 1.6.0, 1.6.0 is now feature frozen. In addition to a number of bug fixes, the following new features have been added since beta4: * The SMDI interface in Asterisk has been reworked to fix a number of issues as well as add some new features. SMDI message information is now accessed in the

Greetings, The Asterisk.org development team has released Asterisk 1.6.0-beta5. As of this beta of 1.6.0, 1.6.0 is now feature frozen. In addition to a number of bug fixes, the following new features have been added since beta4: * The SMDI interface in Asterisk has been reworked to fix a number of issues as well as add some new features. SMDI message information is now accessed in the

I''ve got a bunch of fairly large values (30kb each) I''m trying to insert into a CLOB column in my Oracle(10g) model. Since Rails is trying to create a typical insert statement with the entire value, this is causing a problem. Is there a trick I need to know to make this work, or am I out of luck? Thanks! -- Posted via http://www.ruby-forum.com/.

Hi all, I was looking through some archived posts in this forum, and noticed a few people mentioning having to use trial and error when trying to use PCI passthrough to get a USB root hub passed through to a HVM domU. I thought I''d share something I noticed which made this much easier for me. Say I wanted to pass through a root hub which has my USB Plantronics headset connected to

Hello, I've succefuly installed samba 2.2.2 on my Linux box. I can share between Linux and MS boxes, but I want to start samba from xinetd. In /etc/xinetd.d/ I have this: #/etc/xinetd.d/netbios-ns service netbios-ns { disable = no socket_type = dgram protocol = udp port = 137 user = root wait

hi, I''ve successfully implemented shaping and policing with HTB for my SDSL line. Some tips&tricks I discovered which were not covered in the FAQs and docs I read: - To discover the appropriate rate for your line, flood it with traffic and reduce the rate until the matching class starts to show a consistent backlog -- only then you''ve managed to take the queue away