similar to: Problem: Dial command with L option

I got two phones on an ATA-186 (601, 602) and two phones on the TDM22B (603, 604). I have two lines on the TDM22B. I cannot figure out some of the problems: 1. 601 dials via ZAP/3-1 to local phone number at PSTN: ringing pickup on PSTN (empty) still ringing in the phone set 601 2. call from PSTN back: 601 picks up ... everything works !!! No caller id shows up 3. For testing I have only one

Hello all, I've been playing around with early audio, and I'm able to get some things working We have PSTN calls coming in to asterisk in SIP from a Cisco AS5300. If I do the following: Exten => i,1,Playback(ss-noservice,noanswer) Exten => i,2,Congestion(15) Exten => i,3,Hangup() The PSTN caller does not get an answered call (doesn't get billed) but hears the ss-noservice

I can dial from 601 to a public number. The public number rings. I pickup and hear nothing, while on 601 it keeps ringing. (BTW, is it right to say "ringing" on the active phone?) The *CLI> doesn't show me anything useful: Executing Macro("SIP/601-8238", "dial-pstn|88097880|") in new stack Executing SetGlobalVar("SIP/601-8238",

Hi, Has anyone managed to create a setup with a Sipura SPA-1001 as a client? Right now I can connect to the device by dialing the extension number but when I try to connect from the phone handset to make an outbound call it gives an unavailable tone. I'm using Line 2 on the SPA-1001 to connect to the local asterisk server, line 1 is used to connect to my VOIP provider until I can get the

Hi, I have a load of IAX extensions, which I'm trying to set up a standard macro to dial them, which gives unavailable or busy voicemail if there is no answer or the phone is in use respectively. The macro I have at the moment is: ; std-exten macro, ${ARG1} = Device to call, ${ARG2} = voicemail box [macro-std-exten] ; Call the user for 20 seconds exten => s,1,Dial(${ARG1},20,tr) exten

Hi all, Currently trying to get asterisk to dial out with an Internet Line Jack card, however, it does not use the pots line, only on the line it dials out of. This is similar to the previous thread/posting "Asterisk won't answer pstn ring", but I didn't find any follow up to get it working. My asterisk setup is like this: iptelephony:/etc/asterisk# cat phone.conf | grep -v

Don't know enough to properly term the problem I'm seeing... sorry if subject appears vague. And I have other questions too, but "Newbie Help Wanted" isn't exactly more specific... ;-) My setup, intended for testing and all, "*" version 1.6.0.6, dahdi with an X100p clone. Regular phone line provides PSTN access with one port (and my DSL). Calls come in and are

Hi, I have an odd problem when doing a blind transfer. The transfer is intiated and the transferred caller hears nothing until the timeout. I have tried setting the 'r' and the 'm' variables in the dial command. Nothing happens when I use the 'r' variable when I use the 'm' variable I briefly hear music on hold and then it stops until the timeout for no answer

My dial plan seems to work great - in that when I call extensions 1234 it connects to 1234. Strangely, after the call terminates (the other side hangs up first), Asterisk continues in the same context and then matches to extensions _. which causes an invalid extension error! Why does asterisk not leave the context (called internalmenu) after the remote hangup? Instead, it continues to the

My phone still says Not-Registered. I have a Polycom SoundPoint 600 SIP phone. Here is my sip.conf file: ; ; SIP Configuration ; [general] context=default ; Default context for incoming calls port=5060 ;added bindport=5060 ; UDP Port to bind to (SIP standard port is 5060) bindaddr=0.0.0.0 ; IP address to bind to (0.0.0.0 binds to all) srvlookup=yes ;

Hi all, I'm playing with Asterisk and I've already configured all needed .conf files. It works quite well, but now I need your help to tune the system: when I place a call from a softphone to the PSTN, I can't hear directly Telco's tones and I can't use its services, e.g. a mobile's answering machine. I don't know if I have to modify the dialplan or if it depends on my

Hi, I'm using the macro below in extensions.conf for most of my outbound calls. One issue with my current configuration is that when I make an outbound call it doesn't properly detect that my PSTN line (Zap/1) is busy with another call and then overflow to my outbound IAX connections. I think the root cause is that DIALSTATUS gets reported as BUSY. The debug output is below. My desired

Hello List, I am an Asterisk newbie, and I got a question about Asterisk Background command's option "noanswer": What is required from the user agent, such as a SIP phone, to be able to hear the playback without Answer()? I'm asking this because when I used X-Lite, I could hear the the audio file but when I used a hardware phone (an ATA in fact) I couldn't hear it. The

Hello all, I'm having a bit for a problem with the dial command limit option. I have the following dial command (executed from inside the a2billing agi) AGI Script Executing Application: (Dial) Options: ( IAX2/username@voipjet/18005551212|30|HL(60000:20000:00000)0) Now, from what i read in the wiki, this is supposed to limit me to one minute (60000 ms), and warn me when there are 20

Hi all, saw a few messages here, and read the part on the wiki on using asterisk to dial out via another SIP service provider, who incidently is also using Asterisk. First the details; PHONE1 Extension: 2002002001 IP Address: 192.168.128.25 ASTERISK1 Extension: 1111111111 IP Address: ASTERISK1 ASTERISK2 IP Address: ASTERISK2 Destination PSTN Extension: 2222222222 (Information changed

I am unable to get my 9133i to register with my asterisk server. I am including config files below, this a simple test network so there's nothing secret in the config files. I have upgraded the phone to the latest software version (1.4.3) I'm not sure what the problem is. I can call the phone from a softphone, but the 9133i says "no service" on the screen and I can't dial

I have two sites running Asterisk PBX. Normally the inbound calls go through a 3rd (colocated) server and are routed via IAX to the site (the site registers with the main server) I created a macro that tries to ring one location and then another. Each site explicitly Answer() the call even though it will only ring all the sip phones at the relevant location. When fall back is in effect it goes to

Skipped content of type multipart/alternative-------------- next part -------------- asterisk1*CLI> soft hangup Zap/1-1 Requested Hangup on channel 'Zap/1-1' == Spawn extension (macro-exten-vm, s-BUSY, 2) exited non-zero on 'Zap/1-1' in macro 'exten-vm' == Spawn extension (ext-local, 220, 1) exited non-zero on 'Zap/1-1' -- Hungup 'Zap/1-1' --

I use an SPA3000 to connect to the PSTN (SIP/pstn). Since I only have one line, if it is in use, and someone else tries to dial out, they get the all-outgoing-lines-unavailable message played. I'd like to find a way to instead tell them which extension is using the PSTN line. I know that info is available in the manager API, but I have no idea how to get access to it from either the

I can't seem to get the "r" modifier to work on inbound SIP calls. The way I understood this to work is that the channel would be answered, and a ring "tone" would be played to the channel. This is not very friendly in that it doesn't honor connection supervision rules, but... who cares? There are some instances where it may be in my interests to get a