similar to: need help using tftp for polycom 501

I have two Sipura 3000s, one for our main phone line the other for our fax line. I think I need to handle each device in seperate context sections. Both contexts use the s extension and things are not working as it was before I added the second Sipura for the fax line and additional context. Is it a problem to have two contexts with s extensions? What is the proper way to handle this senario?

Hi all I have a few Polycom 331's but after following allot of advice I can't get them to provision from a dhcp boot server. We have a sonicwall router in place. I can press setup and set the FTP boot server to my * box. From there th phones boot fine. But I cannot get them to autoprovision. I have tried dhcp option 66=ipaddres. 66=FTP://PlcmSpIp:PlcmSpIp at 192.168.1.1/ u ahve also

Howdy, I am trying to run a Cobol Compiler through wine. I am running RH7.3 with a current wine release. My directory structure is /usr/share/wine-c/COBOL/. I have been successful in running other applications through wine, but not ones that require a PATH= entry. My problem is: it's looking for an entry in the PATH environment variable that includes 'C:\COBOL' which stores

Does anyone know about this device? SESX3Y11Z 32 GB 2.5-Inch SATA Solid State Drive with Marlin Bracket for Sun SPARC Enterprise T5120, T5220, T5140 and T5240 Servers, RoHS-6 Compliant This is from Sun''s catalog for the T5120 server. Would this work well as a separate ZIL device for ZFS? Is there any way I could use this in a T2000 server? The brackets appear to be

When I try to boot my 501, it runs through the usual stuff, then stops with Config file error Error is 0x4020 and then reboots. The log on the FTP server shows: 0105164151|app1 |3|00|Bootline: ircaIP 0105164155|cfg |3|00|Image bootrom.ld has not changed. 0105164159|cfg |3|00|0004f202f803.cfg could not be downloaded, getting next file. 0105164206|cfg |3|00|Image sip.ld has not changed.

I need a two sample t.test between M and F. The data are arranged in one column, x. Cant seem to figure how to run a two sample t.test. Not really sure what this output is giving me, but there should be no difference between M and F in the example, but summary p-value indicates this. How can I run a two sample t.test with data in one column. x=rep(c(1,2,3,4),2)

We've been happily running Dovecot in Solaris 10 for about 8 months now. Yesterday, Solaris 10's SMF put it in maintenance mode (shut it down) seemingly out of the blue. The only thing going on was that I had updated the ssl certificate. We had previously been using a self signed cert. Now we have a cert from InCommon. We had a problem with a few users who are still on ancient Eudora

I have re-labeled tick marks on the x axis. The problem is that by using axes=FALSE, the axes disappears and when they are called back using axis(side=1)..etc. the axis on sides 1 and 2 do not meet at the bottom left corner of the graph. I would also like to have the 3rd and 4th axes in there as well, all meeting in their respective corners. par(mfrow=c(1,2)) gut<-c("Full",

Has anyone got this to work? Under Idle Display Animation, the administrators guide says "For example, a company logo could be displayed".. In the ipmid.cfg file, I enabled 'ind.idleDisplay.enabled' (ie changed it to 1), and under the IP 500 section, I added an entry for the bitmap that I want to display: bitmap.IP_500.66.name ="arf" but from there I'm not sure

Hi all and thanks in advance. I am regressing Time and Weight, and then predicting Weight at different Time. The format of the Time data is day/month/year. How can I get R to use time series data such as this? Keith -- M. Keith Cox, Ph.D. Alaska NOAA Fisheries, National Marine Fisheries Service Auke Bay Laboratories 17109 Pt. Lena Loop Rd. Juneau, AK 99801 Keith.Cox at noaa.gov marlinkcox at

OK, this is very elementary, but I need help. I have looked in Verzani, past postings etc. Problem: I need to subtract the "length" date between "h4" and "a3" #which would be 4-1 I would rather not convert the two columns into four columns (with headings being "a3","a4","c4","h4"). DF <- data.frame(length=c(1,2,3,4),

Hi, I would like to add a color under a lm line and not the plotted line. Is this possible? In the example, I do not want the area under the curve red, but rather under the llm line. x=seq(0,5,len=100) y=-(x-5)^2 llm<-lm(y~x) plot(x,y) polygon(c(x,x[length(x)]), c(y, y[1]), col='red') abline(llm) keith -- M. Keith Cox, Ph.D. Alaska NOAA Fisheries, National Marine Fisheries Service

We are running a PBX box for our small company's phone system. There are two phones on our network that are not working though. When I reboot a phone that works correctly, like this (note 4907 is the phones extension): asterisk -rx "sip notify polycom-check-cfg 4907" It returns this: Sending NOTIFY of type 'polycom-check-cfg' to '4907' and the phone proceeds to

Here is a runable program. When I plot Day and Wgt, it graphs all the data points. All I need is daily.sub1 plotted. I also need each "Tanks" to have its own col or pch. When I run it with the line with pch, it gives me nothing. rm(list=ls()) Trial<-rep(c(1,2),each=12) Tanks=rep(c("a3","a4","c4","h4"),each=3,2) Day=rep(c(1:12),2)

Has anyone been able to get the IP501 to discover the FTP server IP address (via dhcp or dns) and download 100% of the config from a provisioning server? We are still having to touch each unit to enter the ftp server address and password, as well as set many of the options that will not take from the config file. Have a sample config file you are willing to share? What is required in

Hi all - This isn't really directly Asterisk related, but has anyone successfully set up a Polycom phone to register two lines on two different Asterisk boxes? I can get the first line to register, but the second one does not. I can still place calls from that second line, which indicates to me the server, user, and secret are correct. I'm running the newest 2.6 series firmware with the

Thank you ahead of time for help with this. I have two matrices X [,1] [,2] [,3] [,4] [,5] [,6] [1,] 660 693.00 726.0 759.00 792.0 825.00 [2,] 548 575.40 602.8 630.20 657.6 685.00 [3,] 676 709.80 743.6 777.40 811.2 845.00 [4,] 763 801.15 839.3 877.45 915.6 953.75 [5,] 768 806.40 844.8 883.20 921.6 960.00 [6,] 692 726.60 761.2 795.80 830.4 865.00 [7,] 657 689.85 722.7

My data is the following: Time Resistance Temperature 5 2000 4 10 2200 8 15 2500 14 20 2900 20 25 3000 29 30 3100 38 35 3500 46 40 3800 47 45 3900 50 50 4000 51 I would like to create a scatter plot with Time on the x axis, Resistance on the y axis and Temperature on a second y axis. I have tried Plot(Time,Resistance,ylim=range(0,4500)

Dear R Users, close to the end of this I used wireframe to create a 3D plot from a matrix. The x and y axis tick labels (1-6) for each were created from the matrix being a 6X6 matrix. I need the axis tick labels to be the row and column headings which you can see in the output (mat.x). I have tried several work arounds, but they have not been successful. Thanks in advance. keith rm(list=ls())

Hi- I'm wrestling with some of my data apparently not being called into a GLM or an LM. I'm looking at factors affecting fish annual catch rates (ie. CPUE) over 30 years. Two of the factors I'm using are sea surface temperature and sea surface temperature anomaly. A small sample of my data is below: CPUE Year Vessel_ID Base_Port Boat_Lgth Planing SST Anomaly 0.127