similar to: PRI boards with g729 capable DSPs

Hello, I have an asterisk server running with 23 g.729 licenses. I have also purchased a sound file from thevoice.digium.com. I need to covert this file (uLaw, PCM I think) to g.711, g.729 & g.723 for use with an IVR system. Is there a way I can convert the files using the g.729 digium codec? sox? Thanks -Matt -- Matthew S. Crocker Vice President Crocker Communications,

Hello, I have a Lucent MAX TNT, (DS-3, 672 modem ports, 28 PRIs). I'd like to be able to direct an inbound fax call into my TNT, have it answer the fax and send the image file over to Asterisk, or some other system to deliver to an e-mail address(s). I'm not sure if I need Asterisk to any of the call control or not. I'd also like to setup a print queue and have outbound

Hello, I'm trying to upgrade an Asterisk 1.2 linux box to Asterisk 1.4. I installed the following -rw-r--r-- 1 root root 10908541 Sep 21 13:25 asterisk-1.4.0- beta2.tar.gz -rw-r--r-- 1 root root 993921 Sep 21 13:25 asterisk-addons-1.4.0- beta1.tar.gz -rw-r--r-- 1 root root 80019 Sep 21 13:25 libpri-1.4.0-beta1.tar.gz -rw-r--r-- 1 root root 1523413 Sep 21 13:25

Are there any switchvox/fonality type Asterisk based PBXs where I can buy just the software? I don't want to buy their 'bundles' that come with junky PC hardware. I just want their software/GUI to run on my hardware. Does Asterisk BE come with a GUI management console for managing phones, queues, VM and the like? -Matt -- Matthew S. Crocker Vice President Crocker

Hi I can provide my customers one or several phone lines by using an ATA through the SIP protocol. Is there a similar box that would allow me to provide a PRI (23B +D) to a customer using SIP ? Thanks Patrick

Hi, I can see that there has been some effort to compile the SPEEX codec to operate on the TI c54x and c55x DSPs and I am wondering if anyone would be able to update the mailing list with their current MIPs and Memory resource requirements for their c54x and/or c55x compilation? The only estimate I was able to find in the mailing list archive was 42MIPs but I'm not sure if this is an

The attached file contains build files for TI's Code Composer Studio (CCS) for the C54x, C55x, and C6x DSPs. I had intended to post this a couple of months ago, but it took a long time to get around to doing the little bit of cleanup required. This is a file I/O loopback application suitable for running with the CCS simulators, for evaluating memory and MIPs requirements for these

I''ve been trying to match multiple public IPs in an ingress qdisc. The idea is to allow these specific IPs and aggregate value of 256 kbits incoming to the interface. Can anyone tell me how this can be effectively done if at all possible with tc? Thanks in advance -- Corey Rogers <jrog@sunbeach.net> _______________________________________________ LARTC mailing list /

Hello, I?m using virt-install to build a guest system with CentOS. The system boots up, times out with dracut-initqueue timeout and drops me into an emergency shell. If I exit the shell the install continues and I get a working machine. Any ideas? virt-install \ -n TEST \ -r 8192 \ --os-type=linux \ --disk=/vm-images/test.img,device=disk,bus=virtio,size=100,format=raw \

It would be great to get some idea of what chips and DSPs people have tried to compile Speex for, and what success they've had. So, if you've tried Speex on a chip, could you take a second to fill in the following and post it to the list? Chip Name: Speex Version: Floating or Fixed: Encode, Decode, Both or Simultaneous: MIPS (if known): Other comments: Many thanks, Gerv

[Cross-posted to the asterisk forums, so if it seems familiar...] My company is looking to implement 100% recording of inbound and outbound calls. We're pondering using Asterisk as a trunk-side monitoring system sitting between our Avaya Definity switch and our mixed bag of 6 T1 and PRI circuits. I've read with interest Matt Roth's thread on the Asterisk mailing list, however, since

Could someone explain to a non-US dummy the following phrases I have seen on the list. "I can provide you with tier 1 termination 6/6. I can blend or NPANXX breakout." "We provide US48 termination, blended rate for 1 MOU and above is .008 with 6/6." What is 6/6? What is US48? What is blended? What is MOU? What is NPANXX breakout? -------------- next part --------------

I don't know all the details, but here's a (partial) list of archs on which I've heard of Speex running. I'm sure there are others (especially the float version should really run on any chip with an FPU). float: x86/x86-64 (SSE assembly optimizations provided) PowerPC SPARC fixed: ARM (v4 and v5E) (assembly optimizations provided) Blackfin (assembly optimizations provided) TI

I am looking at ways to harden my asterisk install to prevent computer related issues from happening. I am concerned about about disk write cache. That seems to be a major source of hard drive corruption on power failure. Hard Drive corruption is simply unacceptable for the 99.999% uptime requirements of my Asterisk install that needs to be as reliable as a proprietary PBX. Of course I will be

Hello all, I need a virtual firewall/router solution. I''m thinking of a netscreen 1000 but I want to know if it can be done in Linux. Here is my idea: 1 Linux box 2 GigE interfaces 1 interface setup with a public IP address ($PUBIP) 1 interface setup with 802.1q VLAN trunking with 100 vlans assigned ($VLAN1-$VLAN100) a /25 subnet routed to $PUBIP from my core routers All $VLAN

> 3. I'm interested in the methodology for creating a fixed point > implementation and guaging how "good" it is relative to the floating > point golden standard My methodology at this stage is to get it working on the floating point DSP first and to gain recent experience in both Speex and the TI DSP range while I do so. Then I'll enter into serious discussions about

Hi, I was wondering how a linux box configured as a firewall stacked up against some of the commercial products like checkpoint-1 and gauntlet. Can someone direct me to a good book or online doc that compares linux to some other firewall methods? Mind you, I''m not talking about a firewall in the classical sense, ie ip forwarding turned off and used as a proxy, but the typical Linux box

I've been following this kist for a while now and I suppose I had better introduce myself. This is going to be rather a long message, but that can't be avoided. My name is Andrew Baker and I work for a company called TeleDesign. We are based in the UK. http//www.teledesign.co.uk I have lots of experience with telecomms, a fair bit with VoIP, quite a bit (but rather less recent) with

> Quoting Stephane Lesage <stephane.lesage at ateis-international.com>: > > Is this a bug ? Is it possible to fix it ? > > (I use version speex 1.2beta2, because newer versions just > don't work > > on my > > platform) > > This is probable the cause. 1.2beta2 was the first release to > include the resampler and it had many bugs. I suggest trying

Hello! I want to run a program twice at one time but it detects that another instance is running and closes down... Is there any way that I can isolate the programs so they cannot detect each other? ~Noah Crocker