similar to: 1.4 downgrade

I like to use zgsmplay to preview Asterisk's gsm files. Works like a charm in 1.2. But something changed in 1.4- they play at the wrong speed, very slowly. They sound fine in the normal course of using the Asterisk server. The file sizes seem wacko. The first example is from 1.2, the second from 1.4: $ ls -l im-sorry.gsm -rw-r--r-- 1 1000 1000 1419 Dec 5 2005 im-sorry.gsm $ ls -l

i recently bought an SP4000 conference phone but having problem provisioning it using ftp, every time it just hangs at "Updating initial configuration..." screen. when i switch it to tftp, it'll work fine. i though it was bootrom/firmware issue so i upgrade it to bootrom 3.2.2/sip 2.0.1 but it makes no difference. any thoughts? p.s. i'm using debian sarge proftpd 1.2.10 and the

Does anyone know what the time values in amd.conf are? Are they seconds, fractions of seconds, heartbeats, what? ;'initialSilence' is the maximum silence duration before the greeting initial_silence = 25 ; Maximum silence duration before the greeting. It doesn't say in amd.conf or at http://www.voip-info.org/wiki/index.php?page=Asterisk+cmd+AMD --

Hi (Armin)! Does someone knows how to identify the type of the card? The delivery note says it is a V-4BRI-8M, whereas lspci reports a 4BRI-8M. What is it really? Are there any Eicon tools to identify the card type? thanks klaus 0000:0a:03.0 Network controller: Eicon Networks Corporation Diva Server 4BRI-8M Rev 2 (rev 01) Subsystem: Eicon Networks Corporation Diva Server 4BRI-8M Rev

Does there seem to be a popular Linux distro folks use specifically for Asterisk? I'd like to move off of FreeBSD but I'm not too familiar with Linux distros. In particular, I'm looking for a free, stable, well supported distro that has a friendly community. Any advice appreciated. Sorry for asking a question that I'm sure has been asked thousands of times. Best regards,

Hi list! I have to do a new bare metal installation of a box running Asterisk with bristuff or vzaphfc. The box will be used as a really lightly loaded file server and pbx. Any advise on which architecture I should use? The cpu is a 64 bit capable AMD (the box is running x86_64 now) but is still suffering from echo on the BRI lines. Should I go with the normal x86 or the 64 bit x86_64

I have some Audiocodes units which appear to be running Linux, according to the unit's own "System Log" kern.warn Linux version 2.4.21openrg-rmk1 #2 Wed Aug 30 17:05:29 IDT 2006 However my contact at Audiocodes claims otherwise On 12/4/06, Yaniv Nizan <Yaniv.Nizan@audiocodes.com> wrote: > > > > I doubt that we are running Linux on the MP-202. Perhaps there is a

hey all, I'm getting this warning on the console when I leave a voicemail on my test server: [Oct 16 20:56:36] WARNING[3853]: app_voicemail.c:6552 vm_exec: Prefixing the mailbox with an option is deprecated ('u250@local-vm-users'). [Oct 16 20:56:36] WARNING[3853]: app_voicemail.c:6553 vm_exec: Please move all leading options to the second argument. This is what voicemail.conf

How well do you think asterisk could run on a miniITX board like the ones linked below with the call volume of say a small doctors office or something? http://www.mini-box.com/s.nl/sc.8/category.15/.f - Mark -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20061229/638e4426/attachment.htm

One more question- is there a reference somewheres for all the built-in Asterisk macros? thanks! -- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ?Carla Schroder ?check out my "Linux Cookbook", the ultimate Linux user's ?and sysadmin's guide! http://www.oreilly.com/catalog/linuxckbk/ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

can i setup a dns name server in my localmachine? thanks for any help!

Hey all, I've been doing a lot of playing, and a lot of reading, and it seems people are split as to whereas if they're running their favorite Linux distro and asterisk or Trixbox. I'm getting closer to really looking at a production environment and I'm just looking for any opinions. I'm really enjoying learning linux and asterisk, so initial "ease of use"

What's wrong with the Asterisk CLI history? When I exit the CLI, and re-enter, the last command in the history always defaults to 'stop now'. This is very bad, and it's caused accidental shutdowns more than once. Connected to Asterisk 1.2.9.1 currently running on hera (pid = 17399) Verbosity is at least 3 hera*CLI> A No such command 'A' (type 'help' for help)

What does option '11. Module Embedding' do in Asterisk 1.4? The default is none of them are selected: [ ] 1. apps [ ] 2. cdr [ ] 3. channels [ ] 4. codecs [ ] 5. formats [ ] 6. funcs [ ] 7. pbx [ ] 8. res -- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ?Carla Schroder ?check out my "Linux Cookbook", the ultimate Linux user's

Hi, I'd like to use SSH without password so I can use it in scripts (for example in combination with rsync to do backups). I have Carla Schroder's "Linux Cookbook" and I'm trying out the various receipts, but the one for SSH without a password doesn't work. The book is slightly dated, and I wonder if SSH included in CentOS works differently. Any suggestions? Niki

Hi, I'd like to use cdrecord on the command line. I'm currently reading the relevant chapter in Carla Schroder's "Linux Cookbook". Unfortunately, some of the tricks and hints included in the book don't seem to work the same way on a standard CentOS 5 install. 1) Am I supposed to be root to use cdrecord and burn an .iso file? 2) How do I specify a device?

Besides ranch networks and borderware, what other SIP aware firewalls for the SOHO/medium market exists? -- ------------------------------------------------------------ Erick Perez Panama Sistemas Integradores de Telefonia IP y Soluciones Para Centros de Datos Panama, Republica de Panama Cel Panama. +(507) 6694-4780 ------------------------------------------------------------

Hi, I want to setup a simple SAMBA file server, in its most simple configuration first, and then fine-tune that gradually. I've never worked with SAMBA before, so I based myself on Carla Schroder's "Linux Cookbook", chapter XX: SAMBA. Here's what I did, following the step-by-step instructions and reading the explanations as to what-does-what: # mkdir -m 777 /shares Rename

OK, I am confused and DNS is the reason. So, Comcast, 13 public IP's bound to my modem. Each public IP has a DNS name from comcast (they assign it automatically) like: 173.13.167.209 --> 173-13-167-209-sfba.hfc.comcastbusiness.net I created a DNS entry at GoDaddy for 173.13.167.209 that is 'inhouse.theindiecompanyllc.com' When eth0 is alive, I see that it tells me my name

I've got IAX2 setup between two servers with this config: I have two servers on a switch: asteriskm is 192.168.0.160 and asterisk1 is 192.168.0.161 asteriskm has a Sangoma T1 card in it. I want to route calls from asteriskm to asterisk1 which will run an AGI IVR for the call. Config is below, but my problem is that 90-95% of the time when I start asterisk on the two servers I get the