similar to: chan_bluetooth, mobile handset as VoIP terminal?

I googled on this for about an hour and the most relevant hit I got was, of course, the first hit: http://www.sowerbutts.com/linux-mac-mini/#support In it, he indicates that the stock Bluetooth module "should work, but untested" - he doesn't qualify the statement with anything. Has anyone tried chan_bluetooth or even the Bluz stack on a Mini or a G5? If so, under Linux or OSX?

The short of it: I am unable to compile chan_bluetooth on Asterisk 1.2.1 on CentOS 4.2. I installed using the Asterisk@Home 2.2 iso. Server is a plain Celeron 2.93GHz box. Asterisk source is in /usr/src/asterisk, newest chan_bluetooth source is in /usr/src/asterisk-test/bluetooth/chan_bluetooth (I have two older versions in other directories). Steps taken: Followed the instructions here to a

I am running Asterisk 1.0.9 with chan_bluetooth (kernel 2.6.11) I have managed to get the module loaded and it connects to my phone and dials (Nokia 6310i) okay, but once the call connects I hear no sound on either end. It is not who I am calling since it works with any other bluetooth headset or without one. It isn't the SIP phone or codecs because they work with any other number. I think

I have compiled chan_bluetooth and I have used it many times before... but now I have a problem and I can?t find a solution. I have a bluetooth dongle (MSI) connected to my asterisk and I use a V3 phone to make calls to another cell phones... the thing is that I just get one way audio.. I can hear people from my IAX softphone but they can?t hear me... I don?t know what could be.. anyone had

Editing subject line to reflect current status. On 1/26/06, Nilesh Londhe <lvnilesh@gmail.com> wrote: > Since T616 is not answering (and incoming calls are going to Cingular > voicemail after 30 sec,) I suspect the problem focus area is... > > > -- Executing Answer("BLT/T616", "") in new stack > > Is

Hello, I start trying to use a USB dongle and a Bluetooth GSM phone to make GSM call with asterisk using the BLT channel provided by the GSM phone. Unfortunately I get a "Everyone is busy/congested at this time" whenever I try to Dial("IAX2/****@****/2", "BLT/MotorolaLara/3474501***") For sure I make some mistake in the configuration. Unfortunately I don't find

If anyone can help im trying to get my jabra bt200 or bt250 headset working with chan_bluetooth. They seem to pair ok but they will not come out of "Negotiating" state. I get this on first start of *: [HS] jabra > AT^SPTT=? [HS] jabra < ERROR If anyone can be of help please advise, im pulling my hair out on this one. Thanks Jason Price NOTES: JABRA BT200/250

I have a Motorola Razr successfully connected to asterisk using a bluetooth dongle and chan_bluetooth. Here's some issues I've run across: - You have to ignore the instructions in bluetooth.conf, saying to run "sdptool search --bdaddr xx:xx:xx:xx:xx:xx 0x111F" to determine the correct channel to use for your phone. My phone reported Channel 7, but will not work with anything

Hi *, is anybody using a bluetooth headset with some success?? If yes, which stuff is used (usb dongle and BT headset)? (I would like to : 1. be able to receive calls, if possible to answer acalls with the headset. 2. be able to place call, but this seem lot more difficult.) Laurent

Hi, You need to have completely replaced the Microsoft driver, because it doesn't support the headset or ctp Bluetooth profiles. This gave me fits! I followed the instructions at http://www.windowsdevcenter.com/pub/a/windows/2005/07/05/bluetooth.html and it works with both a Plantronics and a Motorola Headset, and I can answer calls with idefisk, eyebeam, x-lite, and kapanga. If you end

asterisk-users-request@lists.digium.com is believed to have said: >Bluetooth enabled phones to talk to Bluetooth headsets; I guess there's a >protocol for the phone to talk to any Bluetooth headset, no matter who made >it. This protocol would have to include something to allow voice to pass >from the phone to the headset and vice versa. It might also include >something for

Even better you can set your firefly softphone to auto answer so that you don't even need to be near the pc to answer. Cheers, Dean -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Linn Boyd Sent: Friday, March 04, 2005 2:12 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re:

Mine goes to chan_bluetooth. Somewhat of a pain getting it going but I am totally floored with how cool it is! Thanks, Steve Totaro

When I installed my first home-PBX three years ago, I was looking at "cellsockets" -- devices which will accept certain cellular phones and provide an RJ11 jack, generating the ring-voltage and recognizing DTMF, which in turn makes your cell-phone look like a CO line. Pretty cool stuff, in theory, but it just didn't seem to be worth the cost, especially since it locks you to a

Hi: I live in a country where calls from landline phone to a mobile phones is more expensive than mobile to mobile. I have FXO card connected to the landline. All the calls from IAX goes through this interface to the pstn and mobile phones. I want to save money by transfering mobile calls through a mobile phone. Is there some interface between the FXO card and the mobile phone so asterisk can

Hello, On a LAN, is it possible to install a bluetooth dongle on one workstation (at this time, this workstation OS is not specified) and use it with chan_mobile ? I've read some USB over IP (or Ethernet) middleware exist but I'm not certain I'm looking at the right direction. Regards -------------- next part -------------- An HTML attachment was scrubbed... URL:

Has anyone here managed to send files from a mobile phone to a CentOS system via Bluetooth? I'm trying with a Samsung E1310, using the GNOME tools, but can't get it to work. I can send files from the Linux box to this phone using the Nautilus bluetooth plugin (nautilus-sendto-bluetooth), and have also managed to "pull" some data I've been trying to send, via

Hello, I?m trying to use my phone with asterisk to get GSM connectivity but I can?t compile the code. I got the asterisk, chan_bluetooth, zaptel and libpri sources, the last two ones compiled perfectly. I have added this to the /usr/src/asterisk/channels/Makefile: include /usr/src/chan_bluetooth/Makefile and I?ve also added chan_bluetooth.so to the CHANNEL_LIBS var. When I do "make

Hi All Does anyone know if one could use bluetooth on a cell phone with *? Would be nice to have your cell as an office phone combo. I heard that there is a bluetooth module for *? If so this should be possible? Thanks Doug --- NOTICE - This message contains privileged and confidential information intended only for the use of the addressee named above. If you are not the intended recipient

I am able to pickup, hangup, and flash, using the buttons on the phone with all of the soft clients and both of the headsets I mentioned below. I don't believe I had to change anything on the client side, just had to get the ctp (cordless telephone profile) working in the bluetooth stack, which was a pita. I struggled with the same issue...I could use the headset, but that's not very handy