similar to: Why is this happening?

Hi, I have a customer who experiences, once in a while, one-way audio... That is... they can hear the person they called, but the person can not hear them. The customer is connected via IAX2 to our softswitch. On the customer's end I have the following config in iax.conf: [general] bindport = 4569 ; Port to bind to (IAX is 4569) bindaddr = 0.0.0.0 ; Address to bind to (all

Hi- I'm using IAX between two boxes, where one box is located in US and the second in Europe. I'm trying to achieve the best voice quality and mainly reliability between these boxes and looking for hints and experience of others. Facts: - Asterisk 1.0.7 - RTT varies from 130-170 ms, depends on time and actual Internet throughput Questions: - What is the sugested codec for such setup?

hi We take calls inbound via SIP from our Cisco PSTN gateways, and pass it to customers using IAX (they run their own asterisk servers). We've noticed that asterisk is transcoding the call into a different codec, if the customer prefers a codec different to that which our cisco gw prefers. As such, the quality of the call can degrade. We'd rather asterisk just passed through the RTP

I need to debug a call quality issue with remote users on the other end of a satellite link. The symptoms are: we here on the Internet side can hear them just fine. On their end, things work sorta OK most times, but they often suffer from severe dropouts and digital warbling, both of which I attribute to them missing packets. Often times they can't make out a word we are saying while we can

Hi all, I'm trying to get IAX2 trunking between two * boxes and am having extreme difficulty :) What happens is when the sending * server (the one initiating the call) receives the ACCEPT back from the receiving server it immediately replies with INVAL. I've checked the code and it seems to be not matching the accept packet with the relevant item in the iaxs array due to the following

Hi All, I've a single 1.2.17 Asterisk system. Gradwell here in the UK is used for PSTN calls via IAX2. Our 'net link is a dedicated 2Mb fibre connection (of which we have ever used 50% max bandwidth). We've no E1/T1 links, everything is IP based. My boss complains that many of the calls he holds with others has a bad quality. He also says that its not just him. My iax.conf file

Hello all, What my app does is accepts a call in on a Dial-In Number (DID) via IAX, and then prompts the caller for the top secret password (123) and then authenticates the user and prompts them to dial in the number they'd like to call. Once they press pound after dialing in the number it will read it back to them, if they press pound it will attempt to connect via the second IAX provider,

Hi, I was wondering if anyone else has a similar setup and can suggest settings for the jitterbuffer: I have a client with an ADSL connection at site A & B with site A being dedicated to voice and having no Asterisk server, site B combining voice and data with traffic shaping and housing an Asterisk server. There seems to be packet loss / jitter on this connection and I wanted to know

Hi everyone, I am trying to connect 2 asterisk servers via IAX, but it just fails to do so.. I'm using SIP to connect the IP phones on the LAN at the 2 different physical locations where each server resides and I'm able to communicate on my LAN via SIP without any issues. The problem is that I'm unable to make Asterisk servers talk with each other via IAX.. Here is my issue.

I've been having 'gappy' audio problems with nufone for about a week now but I think I've nailed it down. Setup: office* - iax2 - colo* - iax2 - nufone office* and colo* are identical physical hardware (Xeon 2.8, dual ethernet, solely used for Asterisk) -- they are joined together through their second ethernet ports over a dedicated 2meg SDSL link. One hop between office* and

Hello, I have just set up an asterisk box (Debian unstable) and I would like to test it with a H.323 application (gnomemeeting). When I call the demo voice menu, I can't hear any sound. asterisk says that the soundfile is played: -- Executing BackGround("H323/ip$212.9.189.172:30005/29597", "demo-congrats") in new stack -- Playing 'demo-congrats' (language

Hello List, I am currently having a bit of a strange issue with a pair of asterisk servers that we recently set up. For a bit of background, this particular business has two sites in two different towns, about 10 minutes apart. They have 3 analogue PSTN lines connected to the asterisk servers at each location, via a Sangoma A200 (with HEC). They are trying to have just the one receptionist for

Hi, I have a problem with IAX accounts... I set up a few months ago an Asterisk server, with mysql support to load iax accounts. Settings seems fine because apparently the system works as expected. Yesterday I tried to add another iax account in the iax.conf directly. And I have a problem with this new account (named 444). I can authenticate from 444 to the server, and I can receive calls from

I am trying to work out IAX <--> IAX communications with my * box. I have a registration with iaxtel and I thought I would start there for my learning. I am able to call the number for Digium's support line (700-428-6000), but the sound is horribly chopping. Some reading revealed the jitterbuffer settings, so I enabled them in iax.conf. I have the following now: ; Inter-Asterisk

I have experienced a * problem with all "forwarded" calls where the inbound caller cannot hear any audio for 2-4 seconds after the forwarded call is answered, causing the caller--who cannot hear anything--to think there is no connection and thus hangs up. If the caller waits a couple of seconds, audio is restored and everything is OK. The problem didn't seem to be there when I first

Hi, I am trying to forward calls to another * server with IAX Here is What I want to Do 1- Call SERVER1, let say at 51412345678 2- SERVER1 should transfer the call to SERVER2 in a remote location 3- SERVER2 Receive the call and transfer it to the PSTN number. I have one X100P card on each machine. What is happening is that when the remote party picks up the phone, all he can hear is a weird

Hello, Please forgive me if I'm repeating this post. I have searched and looked for similar problem with a solution but have not see a similar one. My outgoing SIP and other channels work fine but the incoming/inbound SIP call goes straight to Broadvoice voicemail. I see that Broadvoice is registered when I look at the SIP registry. I have turned on SIP Debug and it is below. Anyone know

Hi, I'm using mysql to store my cdr data. I compiled asterisk-addon module without problems and I see nothing unusual in my cdr_mysql.conf but when I do a reload I get this messages (never seen before): Oct 16 09:43:16 WARNING[8576]: db.c:67 dbinit: Unable to open Asterisk database Oct 16 09:43:16 WARNING[8576]: db.c:423 ast_db_gettree: Database unavailable But If I try to connect from

Hi, My asterisk sometimes stop responding to iax calls. In the log, I've found this: Mar 29 13:35:45 DEBUG[8386] channel.c: Avoiding initial deadlock for 'IAX2/trunkjstpcn-3' Mar 29 13:35:45 DEBUG[13002] chan_sip.c: update_call_counter(1409) - decrement call limit counter Mar 29 13:35:45 DEBUG[8386] channel.c: Avoiding initial deadlock for 'IAX2/trunkjstpcn-3' Mar 29

Hi all, what would be the best way to install windows xp pro over XEN. I guess its only possible with NFS,HHT OR FTP shares. Does anyone have idea about it? How to have these share so that i could have Windows xp as a guest OS over xen(FC6)? Thanks -- View this message in context: http://www.nabble.com/installing-xen-over-XEN-tf2794004.html#a7794684 Sent from the Xen - User mailing list archive