Displaying 20 results from an estimated 800 matches similar to: "Beronet BN4S0 instalation"
2007 Mar 14
1
beronet BN4S0
Hello.
Just installed the Beronet BN4S0 card. But i can't connect to my ISDN Line.
misdnportinfo gives (what does ":Layer 4 protocol 0x04000001 is detected, but
not allowed for TE lib" mean?):
best regards and thanks
t.
asterix asterisk # misdnportinfo
Port 1: TE-mode BRI S/T interface line (for phone lines)
-> Protocol: DSS1 (Euro ISDN)
-> Layer 4 protocol 0x04000001
2005 Feb 27
1
Beronet BN4S0 (quad BRI) card, echo cancel, zaptel timing, bristuff ...
Hi,
I guess I'd need to run Beronet quad and octo bri cards under bristuff to
get zaptel features (echo canceling, timing source).... Am I right or could
I achieve this also with chan_misdn - their native driver ?
Running bristuff on Beronet cards is unsupported. Has anyone succesfully run
Beronet quad BRI cards under bristuff recently ? Do they work ?
Regards,
Rob.
2005 Feb 04
1
*, BeroNet BN4S0 and misdn - problems
Hi,
i use an BN4S0 with misdn an asterisk on Linux 2.6.9. The hfcmulti module
is loaded with option:
type=0x04 protocol=0x2,0x2,0x22,0x2 layermask=0xf,0xf,0xf,0xf
and the fourth port is connected to an ISDN PTMP (MSN) port.
Call to #72 from S0 (BN port 4) are not accepted from asterisk but why ?
Can anyone give me a hint ??
misdn debug messages follows:
lib: NEW_CR Ind with l3id:80001
2005 Mar 08
0
problem in compiling chan_mISDN
Hi List, I?m having problems compiling chan_misdn:
asterisk:/usr/src/chan_misdn-beta-0.0.3-rc4 # make install
cc -ggdb -Wall -D_GNU_SOURCE -Wno-missing-prototypes
-Wno-missing-declarations -fPIC -I/usr/src/asterisk/include
-DAST_CONFIG_DIR=\"/etc/asterisk/\" -I/usr/src/mISDNuser/include
-I/usr/src/linux-2.6/include -I/usr/src/mISDNuser/i4lnet/ -Wall -c -o
chan_misdn.o chan_misdn.c
2006 Oct 13
0
Asterisk 1.4 / install app_bundle problems
Hello group,
I've encountered some problems getting Beronets app_bundle installed
with Asterisk 1.4.0-beta2.
The output messages I get while running make are:
cc -ggdb -Wall -D_GNU_SOURCE -fPIC
-DAST_CONFIG_DIR=\"/usr/local/asterisk/etc/asterisk/\"
-DPTYSPOOLDIR=\"/usr/local/asterisk/var/spool/asterisk/ptyspool\"
2006 Feb 08
0
[Bug 443] New: 2.6 kernel failing in NAT with significant outbound traffic
https://bugzilla.netfilter.org/bugzilla/show_bug.cgi?id=443
Summary: 2.6 kernel failing in NAT with significant outbound
traffic
Product: netfilter/iptables
Version: linux-2.6.x
Platform: i386
OS/Version: All
Status: NEW
Severity: blocker
Priority: P2
Component: NAT
AssignedTo:
2010 Jan 28
2
beroNet BN4S0e PCI Express ISDN Card with chan_dahdi
Hi,
I'm currently trying to get a BN4S0e (which is basically a BN4S0 with a
PCIe connector) working with dahdi.
The module is loading properly but the card is not detected by the module.
Is support on dahdi planned for this card ?
In the meantime i'm gonna use mISDN with this card.
Thanks
Laurent
2004 May 24
0
KERBEROS_V4 rejected as an authentication type
HI,
ok this is what the error is when i try to use FTP
to my linux box. before i configured kerberos this
error didnt come up.
i havent touched the pam.d( i have no plans of doing
so.)
i havent even touched the nsswitch.conf.
i just edited the krb5.conf file. and well the
smb.conf
one thing more. i thought i was using kerberos Version
5 rather V 4
but down the error uses V4. Now does it
2006 Mar 13
1
misdn
Hi all,
I just arrived in Italy from Cebit, qhere I spoke with digium and Beronet
people.
They told me to try to use the mISDN stack to drive beronet and the new
upcoming digium ISDN Cards.
SO I searched, find
http://www.beronet.com/download/card_installation_guide.pdf, and I
immediately got the error:
asterisk01:~ # cd /usr/src/install-misdn/
asterisk01:/usr/src/install-misdn # make install
2005 Feb 08
6
help with xargs and mv
I am trying to move a group of sendmail queue files into a special
area and am developing s script to assist. The manual steps are:
# Identify which messages to move
mailq -qR<domain> > file1
# Select only lines with message ID strings
grep '^[[:alpha:]][[:alnum:]]\{13\}' file1 > file2
# extract only the messages ID
cut -b -14 file2 > file3
# prepend '*' to
2007 Mar 14
1
How to enable download via web browser with vsftpd?
HI ,
I setup vsftp yesterday as a local user only mode. No anonymous was enabled.
I set up this vsftpd on my machine running CentOS 4.4. its ip is
192.168.101.25. so when I login as ftp://192.168.101.25/ via web browser, I
am promted the username as password. After inputing username and password, I
can login successfully. Then I can download everything as usual. But I can
not upload any data ?
2005 Sep 12
1
AW: Debian Sarge, Kernel 2.6.13 and AVM Fritz!PCI v2.0 card
Hi Jon,
perfect instructions, thank you very much.
I used them and after some tests they worked.
Here is what I did. Maybe someone could use it completely:
------------------------------------------------------------
Install helpers:
apt-get install kernel-package ncurses-dev fakeroot wget bzip2
Go to usr directory:
cd /usr/src
wget
2007 Dec 15
0
OpenVox B800P and asterisk 1.4/ mISDN-1_1_7
Hi
i've installed this software:
******************** SOFTWARE
mISDN-1_1_7
mISDNuser-1_1_7
Asterisk-1.4.15
******************** SOFTWARE
misdn is correctly loaded by misdn-inist start
Here there is the misdn.conf (copied from an existing and working
installation with Asterisk 1.2.x and one BN8S0)
******************** MISDN.CONF
[general]
misdn_init=/etc/misdn-init.conf
debug=0
bridging=no
2013 Sep 03
2
No valid cgroup for machine...
Hello!
How do i get pass this error?
offlinehacker:~/ $ virsh --debug 0 -c lxc:/// create o1.xml
create: file(optdata): o1.xml
error: Failed to create domain from o1.xml
error: internal error: No valid cgroup for machine c1
My cgroups seem to be mounted:
cgroup on /sys/fs/cgroup/systemd type cgroup
2002 Nov 13
4
Speed tests
Hi all
I hope no one minds but I was asked to post my timetrial findings back
to the list.
Hope it helps someone else as well, if you have any suggestions please
mention them as I need all the speed that I can get
The scenaro is as follows
I have to switch mail servers and I need to copy all my mbox files over
to the new machine.
As you may well know time if off the utmost importance so I
2010 May 15
3
sendmail many emails
I was getting MANY emails from XXX.hinet.net - kind of filled my mqueue
directory.
I stopped sendmail. removed all the files in mqueue, added to sendmail
access a REJECT for hinet.net
This certainly seems to help - but is that the correct way to take care
of this sort of thing?
Thanks,
Jerry
2013 Sep 04
0
Re: No valid cgroup for machine...
On 09/04/2013 07:05 AM, Jaka Hudoklin wrote:
> Hello!
>
> How do i get pass this error?
>
> offlinehacker:~/ $ virsh --debug 0 -c lxc:/// create o1.xml
>
> create: file(optdata): o1.xml
> error: Failed to create domain from o1.xml
> error: internal error: No valid cgroup for machine c1
>
Can you give me some extra debug log?
> My cgroups seem to be mounted:
2003 Jun 05
2
sendmail: clientmqueue directory storing massive messages, not being cleared
I just got done sending 42,000 e-mail messages that were rotting away in
/var/spool/clientmqueue. I figured out the command to do so was
"sendmail -L sm-msp-queue -Ac -q30m".
I never even knew that directory existed. I thought everything queued was
kept in /var/spool/mqueue (which, I might add is being taken care of on a
regular basis.. just seems the problem lies in the
2006 Nov 06
2
Fwd: How to grep and remove files
Hi All,
I want to know how to grep and delete (remove) files .
What I need is that there are some unwanted out going mails in the queue in
my Centos 4.4 Sendmail Server. I can find them with the below commad.
mailq /var/spool/mqueue/ |grep '<>'
Then It displays all the mails of that type withg their ids in the following
way.
[root at gateway ~]# mailq /var/spool/mqueue/ |grep
2002 Sep 23
2
Blacklist and FTP Passive Mode - Continue
Res,
I continued testing my FTP and don''t works correctly... 8(
#ftp myserver.domain.com
Connected myserver.domain.com
220- -=3D MYSERVER =3D-
220-You are user number 2 of 5 allowed.
220-Local time is now 16:46 and the load is 0.03. Server port: 21.
220-This is a private system - No anonymous login
220 You will be disconnected after 5 minutes of inactivity.
500 Security extensions not