similar to: SPA3000 dialplan coding...

Hi, These days I run into something quite odd. I have an A@H that was modified to meet our requirements. We have a completely funtional DISA which we use pretty much all the time. I works flawlessly with incomming SIP calls from several providers, IAX calls from FWD and with ZAP. Recently we came out with a situation where it doesn't work... with a

Can someone tell me why this is not valid... [start] exten => 1000,1,Answer exten => 1000,2,Wait,1 exten => 1000,3,AgentcallbackLogin(1000||2000@Local) exten => 2000,1,Macro(DialProxy,115551212) exten => 3000,1,Queue(testq||||45) while this is: [start] exten => 1000,1,Answer exten => 1000,2,Wait,1 exten => 1000,3,AgentcallbackLogin(1000||2000@start) exten =>

My porblem is incoing PSTN calls are being forwarde to the * box, the phone rings, but when the phone is picked up, the call is not taken - it continues to ring. I am forwarding the call to (<S0:6666>) in my dial plan Can anyone assist? This is driving my crazy! Extract from the * console Executing Dial("SIP/3001-047c", "SIP/2004") in new stack -- Called 2004 --

Hi, all I am trying to figure out how to forward incoming PSTN call on SPA3000 to VoIP extension(s). Basically, I have converted my home to VoIP. I have normal phone (connected to SPA3000) and couple of IP phones. All call coming from VoIP DID do ring all phones (analogue via SPA3000 and IP ones). Now I need to do same thing for incoming PSTN calls. I have enabled gateway function in SPA3000 and

I'm trying to get working a spa3000 with asterisk. My problem is I cant get wroking the incomming calls (I installed the lastest firmware). My problem is asterisk is rejecting the authentication from the spa3000. Asterisk answers forbidden (SIP/2.0 403 Forbidden) and I think I placed the username and password correctly... Sip.conf says this: [linea2] username=linea2 type=peer secret=1111

Hi, all A quick question. I have SPA3000 and trying to get call waiting to work. I do receive call waiting tone, however hook flash does not seem to work. I think, I set up SPA3000 correctly. Basically, doing HF 2 (switching calls in Australia) does not do anything. Is there any examples on how to setup hook flash operation in Asterisk? Thanks, Rudolf

Hallo! I had ordered a Sipura SPA-3000 in the UK, but the supplier turned out to be unreliable and never shipped. Yesterday I went looking for alternative suppliers and found the Linksys SPA3000 device. It's a different box, but the specs look very similar. Is this the same device? Has anyone used this Linksys SPA3000 successfully with Asterisk? Thanks, Frank

Dear all, Can someone from Netherlands who has SPA3000 send me the Regional & Line1 settings. I'm not sure what is wrong but I can call from asterisk to phone attached to spa300 FXO, but not the other way. I tested three phones: siemens gigaset, tiptel 160 and hpoj k80(fax). Only tiptel 160 can call to the asterisk, other two just dial but nothing happens. I guess this has something with

In my seemingly endless search for the cause of echo on my SPA3000, I wired it up in the following configuration: Analogue Handset <--> (FXS)SPA3000(FXO) <--> PAP2 And set the Line1 dialplan on the SPA3k to '(<:@gw0>S0)' which means that as soon as I pick up the handset I get linked straight through to the PAP2, which gives me dialtone. Even in this configuration, with

Hello List, I just started messing with the settings on a SPA-2000, and it has a really nasty alternative dial tone that I want to make go away. I'm not too hip on how the two numbers interact, so my results haven't been good. (I'm in the US, so I'm bias'ed towards US tones.) Default(I'm ok with this one): 350@-19,440@-19;10(*/0/1+2) OutsideLineTone(Bad, really bad. No,

I am still haveing problems (echo) with my X100P but I'm thinking it has more to do with the server it is in which is not a negotiable item at this time. My question then is to the use of SPA3000's as a replacement from the FXO standpoint. 1. Can you setup the FXO port to recognize distinctinve ring and call a different context like you can do with Zap channels? Being able to call a

Hi, I have a GAM quasipoisson that I'd like to run through MuMIn package - dredge - gettop.models - model.avg However, I'm having no luck with script from an example in MuMIn help file. In MuMIn help they advise "include only models with smooth OR linear term (but not both) for each variable". Their example is: # Example with gam models (based on

How to define bounds for a semi continous variable in lp_solve. Min 5x1 +9x2 +7.15x3 +0.1x4 subject to x1+x2+x3+x4=6.7 x1+x4 <= 6.5 And x3 can be 0 or greater than 3.6 hence x3 is a semi continous variable how to define bounds as well as semicontinous function because using set.semicont and set. bound simantaneously doesn't seem to work.Thanks in advance for the help -- View this

Hi, I have a little situation here :( I have an Asterisk working, and in another office, a Sipura SPA-3000. I configured the SPA and I have the extension working, the incomming trunk working, but the outgoing trunk (peer) does not work. The issue is that I have a dynamic IP where the SPA is, and neither the SPA nor my router have DynamicDNS. So, if I

Hi, I'm using a SPA 3000 as FXO and FXS termination connected to my * box. I'm using the caller ID prefix trick explained here: http://www.voip-info.org/wiki-Sipura+3000. All seems to work really fine, there is only a problem when I hangup my IP phone after a conversation and the other party don't: in this case the PSTN line remains connected until the other party hangs up. Any

Hey, all... If this is too off-topic, I'd be grateful for directions to a more appropriate mailing list. I'm trying to set up Asterisk and some Sipura boxes. I've got an SPA-3000 which is registering twice with Asterisk - once for its FXS/Line1/VoIP1 and once for its FXO/PSTN/VoIP2. My eventual goal is to have inbound calls on its FXO ring four times on its FXS and then fail over to

Hi, I'm using a Sipura SPA 3000 to receive calls from a PSTN line and to send them to Asterisk. But on Asterisk, I don't see the PSTN caller ID! I only have User ID of the SPA 3000 as caller number. The caller number is present on the PSTN line. I'm in france, maybe the SPA 3000 is not compatible? If you have an idea, please tell me! Thanks, Micka?l

Hi, I have a little situation here :( Perhaps somebody can give me a hand with it. I have an Asterisk working, and in another office, a Sipura SPA-3000. I configured the SPA and I have the extension working, the incomming trunk working, but the outgoing trunk (peer) does not work. The issue is that I have a dynamic IP where the SPA is, and neither the SPA nor

First, please forgive me if this is a total newbie question, I've only just begun to scratch the surface of asterisk. I currently have a dialplan set up to let me dial a specific extension, authenticate the user, then have * dial a hard coded/programmed overseas number. What I would like to do is set up my dialplan to have an extension that offers up an outbound dialtone allowing the

# Dear all, # how to replace values in x by means in subgroups created in ... # replace only these values where y=0 in continous sequence # replace by mean calculated locally for each subgroup created by # continous sequence of 0,0,0 in parallel y vector, i.e. # where there is continous sequence of 0 in data frame vector y # but we do not replace values in x[i], if y[i]!=0 # we do not want