similar to: [ISSUE] Unable to divert external calls.

We have a SNOM360 (ext 226) configured for redirection (away on annual leave) to another SNOM360 (ext 225), being tested from a SNOM320 (ext 227) which appears on the surface to be an easy adjustment. Was receiving the following message, "Got SIP response 302 "Moved Temporarily" back from" of which, I was able to understand and correct by adding the following to the

Hi all, We have put together a firmware for a range of inexpensive routers. It has been configured to provide optimum VoIP performance. We have internally tested it for number of months and it looks very good. You should be able to run it easily with 20+ phones on local network ( we still did not hit the upper limit ) assuming that you have bandwidth. Your VoIP will get prioritized over other

Hi Soeren, We encounter here a deadlock with a quite new ATA 120GB disk. The disk worked good for about 3 weeks, but now we have a strange problem. There seems to be one defective file on the disk. fsck doesn't find it, and if I do a cat file > /dev/null The machine locks completly. Serial console is dead, no remote DDB via ALTBREAK possible anymore, no panic message, just freezed. The

Hi, I've seen that this commit never got MFC'd: http://www.freebsd.org/cgi/cvsweb.cgi/src/lib/libc/stdlib/realpath.c?rev=1.14&content-type=text/x-cvsweb-markup Would it be possible to do that or are there any objections out there ? Martin Martin Blapp, <mb@imp.ch> <mbr@FreeBSD.org> ------------------------------------------------------------------ ImproWare AG, UNIXSP

Hi Ian and others, umount(8) -f does crash here on several just updated 4.8STABLE boxes for nfs volumes. Server is an IRIX server. All clients are FreeBSD. Here is a backtrace: #0 dumpsys () at /usr/src/sys/kern/kern_shutdown.c:487 #1 0xc021f1c0 in boot (howto=260) at /usr/src/sys/kern/kern_shutdown.c:316 #2 0xc021f60d in panic (fmt=0xc03bd664 "from debugger") at

The Asterisk Development Team has announced the releases of: DAHDI-Linux-v2.11.0-rc1 DAHDI-Tools-v2.11.0-rc1 dahdi-linux-complete-2.11.0-rc1+2.11.0-rc1 This release is available for immediate download at: http://downloads.asterisk.org/pub/telephony/dahdi-linux http://downloads.asterisk.org/pub/telephony/dahdi-tools http://downloads.asterisk.org/pub/telephony/dahdi-linux-complete * This release

The Asterisk Development Team has announced the releases of: DAHDI-Linux-v2.11.0-rc1 DAHDI-Tools-v2.11.0-rc1 dahdi-linux-complete-2.11.0-rc1+2.11.0-rc1 This release is available for immediate download at: http://downloads.asterisk.org/pub/telephony/dahdi-linux http://downloads.asterisk.org/pub/telephony/dahdi-tools http://downloads.asterisk.org/pub/telephony/dahdi-linux-complete * This release

The Asterisk Development Team has announced the releases of: DAHDI-Linux-v2.11.0 DAHDI-Tools-v2.11.0 dahdi-linux-complete-2.11.0+2.11.0 This release is available for immediate download at: http://downloads.asterisk.org/pub/telephony/dahdi-linux http://downloads.asterisk.org/pub/telephony/dahdi-tools http://downloads.asterisk.org/pub/telephony/dahdi-linux-complete * This release adds automake

The Asterisk Development Team has announced the releases of: DAHDI-Linux-v2.11.0 DAHDI-Tools-v2.11.0 dahdi-linux-complete-2.11.0+2.11.0 This release is available for immediate download at: http://downloads.asterisk.org/pub/telephony/dahdi-linux http://downloads.asterisk.org/pub/telephony/dahdi-tools http://downloads.asterisk.org/pub/telephony/dahdi-linux-complete * This release adds automake

Hi, sorry for cross-mailing. Reply-to: set to freebsd-net. I have seen some discussion on freebsd-security etc. about some parts of the subject. I have seen older messages in archives. Regularly the same questions seem to come up. I have not found an all-including description of the answer to s.th. like: "Can anybody tell me the order packets get processed in kernel related to IPSec,

Hi All, I am looking for a way to allow users to dial *21*, followed by a number and the pound key. Asterisk must then divert all incoming calls to the user's extension to the number given. I got it right halfway using a tip from http://ns1.jnetdns.de/jn/relaunch/asterisk/page6.html. Thanks to whomever is the contributor of the above tip. The problem is however, that the number to which

I have a TDM400 running telco lines on ZAP2-4 My after hours config is supposed to receive the incoming call then divert it to my home phone by calling out one of the other zap channels available. console output as such... Starting simple switch on 'Zap/3-1' -- Executing Dial("Zap/3-1", "ZAP/G1/0823274210") in new stack Aug 20 19:06:44 NOTICE[646]:

> On a related note, how do you get a Cisco 7940 to dial numbers with a > hash in them, instead of just using the hash as a dial key. For > example, I have *#21# to check diverts, but the phone will just dial > "*" as soon as you type the # after it. <DIALTEMPLATE> <TEMPLATE MATCH="#..." Timeout="5" User="Phone" /> <TEMPLATE

I have a question. I have two numbers on Asterisk like 902121234567 and 902123645789 and i want to divert first number's call to Trunk if second number is unregistered. Is it possible? ?f yes, how? Flow Diagram: *Two numbers are registered on Asterisk 902121234567---------------------------- registered to Asterisk

Hi, I am facing problem while running RAW tests. When i run following command, i get the error stating "Did not find a test named RAW-*". Command :: root at nishant-ThinkCentre-A85:/home/nishan# smbtorture //nishant/base -Uuser1%base_ubuntu RAW-* using seed 1319521290 host=nishant share=base user=user1 myname=nishant-ThinkCentre-A85 Did not find a test named RAW-* Please help me

I was working with the rmetrics portfolioBacktesting function and dug into the code to try to find why my formula with 113 items, i.e. A1 thru A113, was being truncated and I only get 85 items, not 113. Is it due to a string length limitation in R or is it a bug in the strsplit or gsub functions, or in my string? I'd very much appreciate any suggestions ============Input script:

--- src/chroot.ml | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/src/chroot.ml b/src/chroot.ml index b5c1e53..9e522d9 100644 --- a/src/chroot.ml +++ b/src/chroot.ml @@ -26,7 +26,9 @@ let build_chroot debug files outputdir = List.iter ( fun file -> try - let path = file.ft_source_path in + let path = if file_exists file.ft_source_path +

--- configure.ac | 1 + src/config.ml.in | 1 + src/dpkg.ml | 1 + 3 files changed, 3 insertions(+) diff --git a/configure.ac b/configure.ac index 2141540..99ea913 100644 --- a/configure.ac +++ b/configure.ac @@ -92,6 +92,7 @@ AC_PATH_PROG(APT_GET,[apt-get],[no]) AC_PATH_PROG(DPKG,[dpkg],[no]) AC_PATH_PROG(DPKG_DEB,[dpkg-deb],[no]) AC_PATH_PROG(DPKG_QUERY,[dpkg-query],[no])

Hi R-users, I want to apply a function to each column of a data frame that is numeric. Thus I tried to check it for each column first: > apply(df, 2, function(x) is.numeric(x)) A60 A64 A66a A67 A71 A75a A80 A85 A91 A95 A96 A97 A98 A99 FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE

Hi, Does anyone know what it means when I've got an incoming fax routed through to iaxmodem+hylafax and then I see this in the asterisk log: DEBUG[18902] chan_dahdi.c: Detected digit 'f' This happens just after the initial fax negotiation has started and seems to correspond with the sending fax machine giving up. Googling hasn't helped me here :( -- Cheers, Kingsley.