similar to: Easiest (best?) linux distribution for dedicatedAsterisk box?

First off, I'm sorry for sending so many messages to the list-serv. Hopefully this will be my last for a while! I was going to use my WRT54G router as a small Asterisk box, but I forgot that I had a spare eMachines computer (Intel Celeron 633 MHz, 20GB HD, 64mb RAM). Will this machine work OK for a very simple dedicated home Asterisk box? Also, what is easiest linux distribution to use and

Hi all, We have put together a firmware for a range of inexpensive routers. It has been configured to provide optimum VoIP performance. We have internally tested it for number of months and it looks very good. You should be able to run it easily with 20+ phones on local network ( we still did not hit the upper limit ) assuming that you have bandwidth. Your VoIP will get prioritized over other

I've now tried 2.0.6pre2 with a SuperMicro P6DNF dual PPro as well as the Everex StepDP/Pro dual PPro MB; same result, large (more than 1 MB) file copies usually crash with only a message about oplock errors in the logfile. Running a single CPU kernel works fine (pre2 seems much faster, but I haven't done any testing). 2.0.5a does the same. NFS and mars_nwe with the same hardware and

Hi folks. Please don't flame me but I've been googling around for days, read a tremendous amount, tried everything, and still no go. This is most definitely a typical newbie question. - I sure hope there's somebody(s) out there who'll humble themselves to help me out. I've set up an 'out of the box' basic Asterisk server running on Slackware Linux. - It basically

Hello, I have this bug report that I have filed. Is there any specific reason why samba behaves this way, and doesn't use the unix semantics? Since this is even more restrictive than unix semantics, I'm more inclined to call it a bug until I know it's supposed to be this way. Any ideas? ----- Forwarded message from Mike Fedyk <mfedyk@matchmail.com> ----- From: Mike Fedyk

I have recently built a new server using CentOS4. I've found one major oddity: time resolution is completely whacked. I'm not using an external time source nor am I relying on NTP for time resolution. For some reason, time on this server moves forward at a far more rapid rate. Right now, all my other systems show Sunday May 8, 3:19 pm. The CentOS server thinks its Monday May 9, 3:54

Package: xen-hypervisor-3.0.2-1-i386 Version: 3.0.2-3+hg9762-1 Severity: normal xm fails to find xen-utils, the error apears with other parameters, such as xm create. The error also apears when running "/usr/lib/xen-common/bin/xen-utils-version". Best Regards /Lars Staun Knudsen #xm list WARING! Can't find version 3.0.2-3-1 of xen utils, fallback to default version! Name

Hello, I am not able to open the web interface for the wrt54g router on the lan. Which port does it use ? Thanks Varun

Ok, I've done some more research and I don't think I want an FXO box... What I'd like to do is use BroadVoice (with their BYOD plan) and then run Asterisk on my WRT54G router. I'd also like to use my regular home phones without having to use a special "SIP" phone... (eg. I like my Vtech normal cordless phones) What do I need to buy to get this working? It sounds like I

I'm looking for a recent asterisk package for the Linksys WRT54G. Has anyone know of a 1.2.X build for this box? Thanks, Frank

Hi, We're installing an * box next week (pbxtra from fonality) and I'm trying to come up with a solution for remote users that want a phone in their home. I need VPN and QoS capability, wireless support would be a nice to have. Ethernet handoff is fine, i don't need integrated dsl or cable modem... I've been googling and cruising the list and can find bits and pieces

Hello to everybody, does anybody knows how to install Asterisk on a Linksys WRT54G(S)? I had read in the Wiki that it is possible. If somebody has a tip, this would help me very much. Regards Bastian

I'm using Asterisk (1.2.14, RedHat 9) but I've been having trouble with SIP re-invites. I have a DiD from an ITSP and when someone calls in, Asterisk plays a menu recording and transfers the call to the external line the caller selects. Since both sides of the call are external, I want to use re-invite to avoid the rtp packets from going through my server after the call is bridged. I

I and some other people have problems with running the freedos image included in Ultimate Boot CD (UBCD), when using memdisk for floppy emulation. Memdisk starts booting the image and freedos shows the following menu: 0 Boot Clean 1 Boot UMBPCI (silent) 2 Boot UMBPCI (optimal) 3 Boot UMBPCI (semi-defensive) 4 Boot EMM386 (optimal) 5 Boot EMM386 (semi-defensive) 6 Boot no UMB (defensive) 7 Boot

Bob, Have you looked at any of the products by Zyxel? With QOS, VPN & wireless support they have: For ADSL: Prestige 652HW Firewall/Router: Zywall 10W & 30W I'll be honest, I havn't used any of these yet. We were looking for similar products to suuport our VOIP installs. We just ordered some demo units from Zyxel, we shoul have them later this week. I'll let you know

Hi, I was reading a lot of data from one LVM logical volume and wanted to watch the disk statistics with iostat today. To my surprise, I was seeing the same activity on two logical volumes (LV) and the physical disk containing the two. A little investigation showed that one LV was a snapshot of the other, and I was reading from one of the snapshots. While I understand that the two LVs

plain text document attachment (xx-paravirt-processor-header.patch) System routine updates for the paravirt_ops interface. Signed-off-by: Steven Rostedt srostedt@redhat.com Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com> Index: clean-start/include/asm-x86_64/processor.h =================================================================== ---

plain text document attachment (xx-paravirt-processor-header.patch) System routine updates for the paravirt_ops interface. Signed-off-by: Steven Rostedt srostedt@redhat.com Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com> Index: clean-start/include/asm-x86_64/processor.h =================================================================== ---

Hello, I would like to setup an * system but have no experience with Linux and am just learning about VoIP. My programming experience is pretty limited as well, so I may be getting in way over my head, but I am willing to take the time to figure out how to use *. I'd like to use * to create a PBX that initially would include myself and three or four individuals who are located in separate

Hi list, Best Buy currently has an eMachine on sale for less than $300.00 without monitor. I didn't see any recent complaints on www.consumeraffairs.com. I didn't take the time to do a thourgh search so may have missed some. Red Hat hardware list does not have one eMachine listed. I went to eMachine's home page and found the following: AMD Athlon? BE-2350 dual-core processor NVIDIA?