similar to: Grandstream BT101 Auto-Answer

I've done all the googling I can on this, and have come to the conclusion that a Grandstream BT101 can be abused to be a door phone. Could someone with access to one, confirm that the following is possible? Researched: 1. When set to auto-answer, dialing the phone will result in a short beep and instant speaker-phone connection. 2. When pressing the "message" button while

Hi All, I have been struggling with the auto dial out in asterisk. I am trying to get a call to be auto dialed and play back a message once the line is answered. So far I have been unsuccessful. Currently what happens is I have my .call file. I mv it into /var/spool/asterisk/outgoing. The call is initiated and that all works, my problem is that it does not wait for the line to be

Hello, Has anyone noticed that if you don't pick up a BT101 phone in 60 seconds it stops ringing and acts like it was never called ? Or is it just something I missed ? If it matters for something I have call waiting enabled on the phone. Product Model: BT100 Software Version: Program--1.0.5.11 Bootloader--1.0.0.18 HTML--1.0.0.37 VOC--1.0.0.6 Custom Ring Tone:

Got one weird one and one prob easy one. 1. I have upgraded our BT101's to Program--1.0.5.0 Bootloader--1.0.0.17 HTML--1.0.0.34 VOC--1.0.0.6 after doing this i have some phones on different subnet's ie 255.255.255.248 or .192 or .252 and i am now unable to login to these phones from different subnet's . I have one at home which is on a .248 ( Using an external IP for the phone )

In the following scenario, the user calling from a SIPphone registered phone is able to transfer the called user to another extension. sip.conf: [general] port = 5060 context = from-sip register => number:password@proxy01.sipphone.com extensions.conf: [from-sip] exten => s,1,Dial(SIP/111&SIP/117) exten => 111,1,Dial(SIP/111,20) exten => 117,1,Dial(SIP/117,20) 1. The calling user

I know this must have been asked before, but I was just wondering, the manual says it can do attended transfers, has anyone gotten this to work successfully? How did they do it? Is it possible to do attended transfers with the 'T' dial option? If so, how? -Chris Chris Shaw IS Manager Water Tech Industries Phone: (888)-254-8412 Fax: (503)-261-9118 E-Mail: chriss@watertech.com

Hi all, I am having an issue with a multiple ISP setup. I have followed the docs online and I think I have everything setup correctly but I can get the desired traffice to go out my secondary ISP. A quick run down on what I am trying to acomplish. I want to send all sip/iax traffic out one ISP in the net zone and then send all other traffic out my secondary ISP in the dsl zone. Attached is

Hello, I am struggling to have a SPA504G to auto answer (for intercom/paging). I have tried the following SIP headers (not all together), but without luck: SIPAddHeader(Call-Info:\;answer-after=0); SIPAddHeader(Call-Info: answer-after=0); SIPAddHeader(Alert-Info: info=intercom); SIPAddHeader(Alert-Info: Ring Answer); SIPAddHeader(P-Auto-Answer: normal); Any other ideas? Leandro PS I have set

Hi All, I have been attempting to get an AGI LCRdialout script to work. Basically what I need to have happen is when someone dials out a number the script check to see if it is local if so, go out the ZAP channel. If the ZAP channel is busy, go out the IAX channels, if IAX is all busy, go out the SIP channels. Here is a sample of what I have in my script. #!/usr/bin/perl use strict; use

I am looking to setup paging using the auto answer feature on the Grandstream GXP2000. I am thinking I will follow the method as described here: http://www.voip-info.org/wiki/index.php?page=Asterisk+cmd+page I will setup the 4th account on the phone to auto answer. Does anyone else have a method that works better? I also looked at the allpage AGI written on Voip-Info. But it seems

I've been digging around with some cisco engineers for about a week & I finally got an encouraging response to the Auto-Answer issue with the SIP Phones. Here is their reply: =============== == FROM CISCO == =============== Auto-Answer feature is introduced in SIP IP Phone 6.0 version. This software version is expected to be available for customers shortly. Please let me know if you

Hi, I'm testing paging using snom 360. Can someone correct my dialplan? Regards, Jason. ================================================== ;exten => _99XXXX,1,SIPAddHeader(Call-Info: Answer-After=0) ;exten => _99XXXX,n,SIPAddHeader(Call-Info: <sip:192.168.1.113>\;answer-after=0) ;exten => _99XXXX,n,Dial(SIP/${EXTEN:2}) exten => _99XXXX,1,Set(__SIPADDHEADER=Call-Info:

I was trying to get my polycom phone to auto answer. I added this to the dialplan. Used a different phone to call "22" and the phone rang it did not auto answer. Did I miss something? exten => 22,1,SipAddHeader(Call-Info:=\;answer-after=0) exten => 22,n,SipAddHeader(Alert-Info: Ring Answer) exten => 22,n,Set(__SIPADDHEADER=Call-Info:\;answer-after=0) exten =>

I am having a problem with Polycom auto-answer. I have the auto-answer working between PhoneA and PhoneB, but when I try to use the intercom between more then one phone I start having problems. PhoneA dials *3 which calls PhoneB, PhoneC, and PhoneD. All the phones ring, but only one will pick up, the rest will hang up and I get this error on Asterisk: Got SIP response 500 "Internal Server

I'm using a mix of Cisco 7960, Linksys SPA-942, Cisco 7961, Cisco 7970 phones in a paging group. I have all the phones set up with an extra line that auto answers the dial from my paging extension when the primary line is not in use. All of these are operating correctly however the 7961/7970s all ring once and then auto answer so the person paging all the phones has the first part of his

Sipura has implemented auto-answer in version 0.9.5 of the SPA-841 firmware. However, it is implemented via the Call-Info header, which Asterisk stable doesn't currently support. The attached patch implments a quick hack to support the Call-Info header from the Dial() application by way of setting the CALL_INFO variable. For example, the following macro can be used to dial up a single

Hi All - I'm trying to implement the auto-answer config from the wiki, but the result for me is that the phone just rings as normal. I'm running firmware version 1.4.1 on an IP500. I've added the following to my sip.cfg: <alertInfo voIpProt.SIP.alertInfo.2.value="Ring Answer" voIpProt.SIP.alertInfo.2.class="4"/> and this to my ipmid.cfg

Hello, We found out that after upgrading the firmware in our GrandStream BudgeTone phones, that we were not able to transfer calls anymore. We use the BT's own tranfering mechanisme. We can dial the phone where the call should be tranfered to. But after that, the original caller stays in music on hold on the server and there's no way to get the calling channel back again (not to the

We are doing a medium sized office in NYC with 80 phones. The customer originally requested Polycom 601 phones. The COO also authorized us to purchase 2 Grandstream GXP2000 phones for the mail room. We find these phones much easier to configure and work with asterisk . They support BLF & intercom right out of the box. They can also be centrally managed and provisioned. They also sound great

I'm preparing to deploy a small number of Grandstream BT101's and GXP2000's to a remote location (which I won't have access to). I'd like to have them pull a config file from my server - I'm almost there... The phones are looking for the config file on my webserver which is good. I need to generate that file however. I see a tool on the GS website to generate