similar to: Linksys PAP2T-NA - call goes through but phone doesn't ring

i have the problem in the hardware linksys pap2t, I am install asterisk with asterisk-gui and work fine but the hangup the phone (linksys pap2 t), no tone and sound like tu,tu, tu , tu , tu , tu , tuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuu what is the problem with phone ??? add param special??? Note: i am mark number phone and wait ... sesonds and call. thank you. -------------- next

Does anyone know how the Linksys PAP2T ATA's can be mass provisioned? Documentation seems to be sketchy, even on the Linksys web site. Thanks, Doug. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20070607/3f90695c/attachment.htm

I've got a PAP2 that I've got working with asterisk. At the moment, its configured so that when a phone is picked up on it, it connects to Asterisk. My hope is that I can let Asteirsk handle the entire dialplan, including dial tone generation. What would my context in extenstions.conf look like for this sort of dialing. More accurately, how can I get Asterisk to generate the dial tone on

Hi Everyone I think PAP2T supports DynDNS and other Dynamic DNS providers. I have a box that needs to be secured at all times. Currently it's not connected to the internet. If it were connected, I would have iptables block any and all traffic from outside but I want a single device - Linksys PAP2T - to be able to connect back to the server. That is a stand alone device and doesn't support

Anyone have an example XML file for the PAP2T? Cheers, j

Hi all: when i make a call from linksys pap2t to an asterisk server a fake ring is heard some times ,but when sending calls between 2 asterisk servers through sip no fake ring is heard but real one. any suggestions please. _________________________________________________________________ Windows Live?: E-mail. Chat. Share. Get more ways to connect.

Hi Folks, I know the PAP2T-NA has a jitterbuffer.... however, it seems to be adaptive, which is fine for most situations... however, is there some way I can either: A) Specify how long it waits before it starts to shrink? B) Specifiy a fixed sized jitterbuffer? -------------- next part -------------- An HTML attachment was scrubbed... URL:

I was having problems getting a Linksys PAP2T-NA to work with Pitney Bowes mailing station so it could use its modem to dial home and download postage/software updates. After scowering the web, I couldn't seem to find a definite how to article on what settings were needed. I finally came up some settings by combining the information from various places around the 'net. I have typed out

I have a big headache. I have an Asterisk server connected to an Avaya PBX. Everything is working between those two. The problem is that I have 45 PAP2T adapters and 45 SPA3102 adapters that connect via the Internet to the Asterisk server through a Fortinet firewall. When calling from a PAP2T I get one way audio, the remote site can hear me but I cannot hear them. If I do an "rtp

I'm considering a situation where I buy about twenty ATA devices. I've played with the Linksys / Cisco PAP2T, and got that working fine with some inbound and outbound faxing. The web GUI was okay. I'm seeing prices around $45 to $50 for this thing. It comes with two FXS ports, but I only need one FXS. I've seen the Grandstream Handytone 286 online. It looks promising as an

I have a pair of Asterisk servers which are happily routeing VoIP calls. I want to hook one of them to the PSTN. Given that I am in the UK, what is a reasonably easily-available device to provide an FXO interface from a Linux box, with a minimum of faffing around with drivers? Just one line is needed, though in theory two might eventually be useful. My usual white-box hardware suppliers don't

Hi all, Is it possible to send a SIP header to a PAP2T or SPAxxxx and cause the device to automatically answer? I can do this with my Polycom phones and would like to do it with my ATA's. Any ideas? -- Take care and have fun, Mike Diehl.

Here is Mexico the phone company uses a DSL router from 2Wire which in my opinion is quite bad. I am having problems getting PAP2T adapters connected to Asterisk using these routers. They connect fine but after about 5 minutes I get a message on the Asterisk console that the ATA is unreachable. So far the only way I have found for the ATA to stay connected more than five minutes is to put it in

Aloha, We are looking to roll a solution that will have the following network layout: ISDN-PRI <--> Asterisk <--> T.38 <--> ATA <--> Fax Does version 1.8 with the Digium fax driver have this capability? I like 1.8 because it is a long term support version. What ATA's are people using? Any working solutions would be great! Aloha, Matt

I am having a hell of a problem trying to get a linksys pap2t to register with my asterisk from outside the LAN. I have tried every combination of NAT, outbound proxy, stun, specify external IP address etc and it just won't work. Here are the relevant details. In asterisk I have set the following. externip=my.ip.address localnet=192.168.0.0/255.255.0.0 nat=yes bindport=5060 here is the

OK this is the RTFM question of the day but I need a sanity check. I have 2 Astra 51i phone and a linksys PAP2 on a single DSL connection. 2 Aastra 51i---------| |-NAT on dsl moden--(Internet)--Asterisk PAP2t----------------| The DSL modem/router which has QOS set for the src and dest to the * box the PAP2 has both lines registered @ ports 5060 and 5061 and work like a charm. one of the

Hi all. I received a PAP2T-NA from a potential customer to see if I could get it configured for testing. I plugged it into my network and plugged a phone into it and attempted to do a factory reset from the handset. I pressed "****" and got NOTHING! Just silence. So, is this TA a brick? Or is there additional voodoo that I'm not aware of? Mike.

Fry's Electronics has a new Linksys 2 line ATA box for sale for $59.99 retail. They have a version with a router for $89.99. We picked the non-router version up and it seems to be a rebadged Sipura SPA-2000. The box has a Vonage service package inside as well, but it does work with other services. The box also has a "User Guide" meant for end-users that is very well written [no

Hi, I have 3 PAP2 connected to *, they work fine but there are some things which I would like to improve, some of them are: - double ring tone when placing a call (I hear two tones it seems like the PAP2 is generating it's own tone) - some kind of noise (like glitches or something) when I pick up the phone (seems like some polarity thing) - I'd like to keep the tone after

The best I can do so far (which appears to be a bit of a hack) is (<:0>S0), which says to add a '0' to the start of the string and dial immediately. This gives asterisk an extension dialled of '0', which isn't the 's' that i'd hoped for, but is a good start! (S0) by itself doesn't work, nor does (<:>S0). Any other suggestions? Thanks James >