similar to: [HELP] - Sound cutting and dropping out - 1.2.7.1/Sangoma/PowerEdge 2850

-----Mensaje original----- De: Mario Montiel [mailto:mariomontiel@grupocsi.com.mx] Enviado el: Viernes, 26 de Mayo de 2006 10:29 p.m. Para: Asterisk Users Mailing List - Non-Commercial Discussion Asunto: RE: [Asterisk-Users] DELL PowerEdge 2850 and TE4110P and TE110P I have many problems with this server and two cards TE4110P, because after several minutes one of two cards stays out without

I am trying to get the temperature of a Poweredge 2850 with CentOS 6.3 on it. Has anybody on this list done this successfully? Thanks -Surya PS: Apologies for cross posting if you are on the Poweredge list. -- Surya Saha Department of Plant Pathology and Plant-Microbe Biology Cornell University, NY, USA http://www.linkedin.com/in/suryasaha

Did anyone manage to have xen (3.0.1 stable) run on this config? (this is on FC4 if it matters). I''ve tried recompiling the xen0 kernel with the Fusion options from my current kernel added, but it keeps removing some of them (maybe some that didn''t exist yet in kernel 2.6.12), and it seems I end up without the correct driver. If someone has this running, I''d be

Hi all, I got the previously mentioned Dell Poweredge 2850 with 4GB RAM and Perc4e raid controller. Installation went well and the raid is pretty fast even with level 5. However I have another problem now... CentOS 5.2 only sees 256MB RAM. Googling a bit, got me to install kernel-PAE, this went well, but CentOS still sees only 256MB. Googling some more, I found a bios update was suggested and

It's Digium, not Dell. I have two identical Dell 1850s, each with the allegedly offensive built-in E100 Ethernet ports. I placed a TE410P card in each. One worked great, the other would not modprobe. Upon examination, we discovered that the two TE410P cards had different firmware revisions. Turns out the one with the older version was the one that worked. We sent the second card back

Hello, Just chiming in here: >From: asterisk-users-bounces@lists.digium.com >[mailto:asterisk-users-bounces@lists.digium.com] On >Behalf Of >bdolljr@bigskytech.com >Sent: Viernes, 22 de Julio de 2005 01:24 p.m. >To: Asterisk Users Mailing List - Non-Commercial >Discussion >Subject: RE: [Asterisk-Users] Dell Hardware >> Mmhh nice !! So, why did Digium forbid it :)?

Hi, recently I came across a deal on a bunch of Dell PowerEdge 2850 servers and I was hoping to use them to run Debian with Xen to provided virtualization support for Windows 2003 and other Debian installations. I was hoping to install 2 copies of Windows 2003 as well as 2 copies of Debian all on top of the DOM0 Debian installation. The servers have dual 3.2ghz CPU''s and include 16GB

Hi All Before I go out and buy a DELL PowerEdge 2850 has anyone had problems (or any other useful experience) getting a TE411P to work with it. I also have a legacy TE110P. Has anyone had problems with this combo. -- Dr. Rodney G. McDuff |Ex ignorantia ad sapientiam Manager, Strategic Technologies Group| Ex luce ad tenebras Information Technology Services | The

Hello everyone, I'm considering getting me a quad-core Dell PowerEdge 860 to run Asterisk. Anyone else using this model? Any tales of woe and sorrow I should know about? Then, in a couple of weeks, I'm thinking of getting a Sangoma A108 and giving that a try. Same question with that one - any quirks I should be aware of? Girts -------------- next part -------------- An HTML

Hello, Digium uses the Dell PE 2850 for their testing. This site says that 3.3V PCI slot. http://www.voip-info.org/wiki/view/Asterisk+hardware We are planning on purchasing a Dell PE 2850 and putting a TE205P card on it. However, the needs a 5V PCI slot. Does Dell PE 2850 has a 5V PCI slot? A person in our group tried to call Dell's customer support but they do not seem to know.

Hello I have a problem to boot my xen kernel, I have a debian sarge 3.1 stable, download xen-3.0.2-src.tgz, extract and compil it with the command "make world" But at boot I have an error : "cannot open root filesystem sda1" My raid controler is a perc4/di raid 5 controler lspci -v said : 0000:02:0e.0 RAID bus controller: Dell PowerEdge Expandable RAID controller 4 (rev

Hi all, I have setup a Dell PowerEdge 2550 with a Sangoma A200 card with 2xFSO and 1XFS modules. The PowerEdge specs are 1 x P3 1133MHz, 512MB RAM. Sangoma A200 has 3 analogue PSTN lines connected. This server is based in Office 1, with 5 users all with a Linksys SPA942 VoIP Handset. There is another Office (Office 2) connected to here using VPN. There are two users in Office 2 with the

Hi All, I have read many posts about problems with Asterisk on some systems. I also set up Asterisk on many different boxes. But I have never seen the following... There is an IBM X346 (3.4GHz Xeon) with one Sangoma A104. This system is currently idle, that means there is nothing running except Asterisk (1.2.7.1). We are handling no calls now, but if I do a vmstat, I get peaks in system load up

Hi, Any folks on this list who have installed CentOS 6.3 on the new Dell Poweredge R815 servers? How was your experience? Thanks -Surya -- Surya Saha Department of Plant Pathology and Plant-Microbe Biology Cornell University, NY, USA http://www.linkedin.com/in/suryasaha

The issues I''ve had with PE2650 and Linux in general all related to a lack of IRQ''s. I had to disable all non-essential devices in the BIOS (lpt, usb and com). It seems the BIOS on that server still has legacy IRQ issues (< IRQ15). In my xenU''s I also renamed /etc/sysconf/hwconf so it would''nt try to init any hardware devices directly. Maybe these options

Hi, I was using Asterisk with Hylafax via IAX Modem. It works fine until I upgraded to Asterisk 1.2.7.1 I didn't change any configuration but it seems that Asterisk does not get the call from IAXModem anymore. I'm doing something like this Asterisk <--> IAXModem <--> Hylafax Usually when I use sendfax -n -d 260XXX somefile I'll see Asterisk receiving the call in

Has anyone managed to add the bristuff patch to 1.2.7.1 successfully? My attempts has ended up bad, so if anyone has a working patchfile for 1.2.7.1 I would be grateful to receive it. Thanks, Vidar -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060430/1c56d94e/attachment.htm

Hi, I'm trying to find how to configure Asterisk 1.2.7.1 to allow two EyeBeam (3015c) to send Instant Messages between them... But I cannot find anything that explains how to do it! Anybody as a clue? is it possible? Now, when we try to send an Instant Message in the eyeBeam it says: "User not available". In asterisk console appears a message saying: ------ Apr 18 17:13:22

Hi! After upgrading to asterisk 1.2.7.1 (from 1.2.4) it seems that app_rxfax doesnt work any more. I've installed spandsp-0.0.2pre25 (the same problem with spandsp-0.0.3pre6.tgz ) app_rxfax.c, app_txfax.c and made the Makefile patch from the same directory. When starting asterisk I always get the follwing error message: [app_rxfax.so]Apr 14 18:54:20 WARNING[7223]: loader.c:325

(This is a shameless copy-paste from the note I posted on http://bugs.digium.com/view.php?id=5090) I have again backported the whole T.38 shebang to the stable branch. The port was based on two versions of the t38passthrough branch: r19125, the latest unconflicted automerge, and r13623, the latest version without the new chan_sip flag structure. Basically, the port contains everything that