similar to: Wanted: CISCO 186 ATAs

Hello I am going to try the new Digium Fax for Asterisk product. I'm planning to connect fax machines to Asterisk (currently 1.6.0.9) via T.38 ATAs. I'm looking at Grandstream HT502 or Linksys SPA2102 ATAs. If anyone has any experience with these devices, or other recommendations, I would be grateful if you could share your experiences. Regards Ian

First of all, I'm not knocking Sipura/Linksys. I have heard very good things about their products. I'm just wondering if they are the only quality shop on the market. I know about the zoom 5801 where you can't dial out the FXO from SIP, only from the FXS port. And I have heard similar about the HT-488 also. I want to know if anyone else makes ATAs where all of the features work

Hi, Can someone explain to me how ATAs operate in a call shop type environment to provide realtime billing to the callshop software. The ATAs seem to be configured to connect directly to the asterisk server, so how does the call shop software report in realtime your destination and duration of the answered call? Thank you, AC -------------- next part -------------- An HTML attachment was

Will Vonage unlock your ATA for you for the $15? Or someone else? I have an ATA from them I would like to use with asterisk as well. -----Original Message----- From: asterisk-users-admin@lists.digium.com [mailto:asterisk-users-admin@lists.digium.com] On Behalf Of Jay Milk Sent: Thursday, April 29, 2004 8:16 PM To: asterisk-users@lists.digium.com Subject: [Asterisk-Users] Vonage and * (and what

Are there ATAs that allow different phone numbers from one network connection? Such as supporting multiple IP addresses so that each RJ11 has a different extension or some other way?

I am wondering if there are any tricks getting the Cisco ATAs to do "distinctive rings" via the ALERT_INFO variable? I have seen some contradictory information in the Wiki, and I tried the example there. I then sniffed the connection between the server and the ATA and didn't see the header sent like it is "supposed" to be. If someone out there has a handle on this and

Hi all, i am new on btrfs, i am testing KVM on btrfs (host: kernel x86-64 3.5.3), the performance is reasonable. I have two question on defrag, can someone help me? 1. According to btrfs wiki, defragment a COW file will produce two unrelated files. Does it apply to the "autodefrag" mount option? 2. Is there any command for the fragmentation status of a file/dir ? e.g. fragment

Hello, >From some days ago, when i made changes in web interface to asterisk that comes with trixbox (freepbx), this dont reflect the changes in asterisk configuration. I has reviewed the file permissions in /etc/asterisk and all files are writable to asterisk user. In freepbx all appears to be ok (i dont see any errors...). Anyone can help me with this problem? Thanks in advance, PS.

Hey all, I've been trying to get MoH to work from the line-in on my soundcard, but as of yet have had no success. I found this script that should allow for it to happen: http://www.sineapps.com/news.php?rssid=722 The script, when run as the asterisk user, works properly and streams sound to stdin. But when Asterisk starts MoH it stops it immediately afterwards with no explanation. Has anyone

Anyone have call waiting working on the ATA-186 connected to Asterisk? Other VoIP phones seem to work, but I can not get the ATAs to allow call waiting. Christopher M Iarocci Network Admin JD Posillico 631-249-1872 X244

hello to all, I advice you to not use CDRtool from ag-projects : Fisrt ag-projects talk about is product like a gpl software however they don't provide at least some documentation for non commercial users . try to call them !! i'll offer you some money . You can not Call them for some advices ... It's really a bad product don't waste your time to setup it. this enterprise must

Can a temporary message in Asterisk voicemail be de-activated so that the "regular" unavailable and busy messages are played. I have several users who are stuck with the temporary message. Thanks Mark

Hi List I need a quality US 800 DID over IAX for my Asterisk server, preferably one that doesn't cost the earth. Any suggestions please? Thanks -- Chris Blunt Entropy IT Ltd -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20061220/4919f3cb/attachment.htm

Hi, I just had a try using the xeno-unstable. When I used the xc_dom_create.py to create a new domain I got the followings: ============================================== Traceback (most recent call last): File "/usr/bin/xc_dom_create.py", line 332, in ? (current_id, current_port) = make_domain() File "/usr/bin/xc_dom_create.py", line 238, in make_domain

Hello all, I am highly interestd in implementing C compiler for EFI Byte Code in LLVM and participate in Google Summer Code. EFI is a much larger, more complex,OS-like replacement for the older BIOS firmware interface present in all IBM PC-compatible personal computers. and the EFI specification provides for a processor-independent device driver environment(like virtualmachine), called EFI Byte

Every few seconds I get the following message: == Parsing '/etc/asterisk/manager.conf': Found == Connect attempt from '127.0.0.1' unable to authenticate I'm trying to track down where it's coming from. I've used TCPDUMP & NGREP to monitor 127.0.0.1, no data's flowing. I've tried loading Asterisk with no modules, tried loading with a naked

Hi List, I wanted to know if anyone knew of a way with asterisk to "switch the voice" of a caller from male to female or vice versa. Thanks. Dovid -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20070426/2d483875/attachment-0001.htm

On 10 March 2010 16:57, 琬菁楊 <ching1119.cs96 at g2.nctu.edu.tw> wrote: > I think the main issue is that EFI C dialect is not ANSI-C compliant: the > size of pointer is determined at the run-time and therefore the layout of > the structure is not static. Does LLVM support this model? Hi Ching, The LLVM IR doesn't care about the size of your pointers, and this is why you have the

Hi, I've been building a gtkmm project on ubuntu and things run smoothly. Now i have to move the project to CentOS 5.4. I set up rpm forge and installed gtkmm. Turns out that the package on rpmforge is too old that my project doesn't compile. I wonder if there is other way to get newer version of gtkmm and all its dependencies instead of manually install them? -best, Ming-ching

Dear list, I wonder if there a better way to have rbind/cbind/append to create the first element (if it is empty) instead of doing the following in a loop? for (i in 1:10) { if (i == 1) { aRow = SomeExpression(i) } else { aRow = rbind(aRow,SomeExpression(i)) } } Thanks Anthony