similar to: Ordered my first phones :)

Seeking recommendations on handsets for use with Asterisk. I've been looking at the Aastra 480i CT because of its cordless handset and also the new Linksys SPA-942. Anyone using either one of these with comments on them? Any other thoughts on good reasonably priced handsets? This is for just a couple of people who work from home offices and will be connecting to an Asterisk server hosted

Hi. I've spent the past four hours on this... if it's a FAQ, I apologize. I am setting up a system with Asterisk 1.4, a TDM400 (3 FXO, 1 FXS) and 3 Aastra 480i CT phones. (1.4.1 firmware.) I have the system mostly working, but am still having trouble with a couple features. This email will deal with parking. First, I think I should point out that transferring calls seems to work

Does anybody know what DTMF coding does S101i adapter using? I've been testing one for over a week and here are my observations: - DTMF signaling is working perfectly with Asterisk, much better than Sipura 3K Though, I think the Asterisk "iaxy" firmware is buggy, the unit is using auto-update feature; so I have Asterisk 1.2.13 and iaxy firmware version is: 23 When enable in

Sorry for being a little off topic, but I'mconsidering a few new phones for my Asterisk installation. I have a mix of Polycom 500/600s and an Aastra 480i CT. I'm considering adding a couple of Aastra 57i or 57i CT. Does anyone here have experience with the 480i CT and the newer 57i CT? I'm curious as to the real differences. Thanks, Michael Graves Sr Product Specialist Pixel Power

Aastra Telecom has released SIP v1.3.1 firmware for the Aastra range of IP phones (480i, 480iCT, 9112i and 9133i). The firmware and release notes (no updated admin and user guides yet) are available for download at: http://www.aastra.com/support/enterpriseip Contrary to what the version numbering would suggest, this is a significant update with many new features and bug fixes. See the release

> > Allen Casteran wrote: > > Anyone know what the POE draw is for the Aastra 480i phones? > > We have switches that will do 15 watts on 12 ports but only do 7.7 watts on all 24 ports. > > A Cisco 3560 switch will do 15.6 watts on all 24 ports. > > Just trying to find out if we need that much power. > Drew wrote: > According to Aastra tech support, 5 watts

Does anyone know if it is possible to upload a common directory to all Aastra phones (480i, 9133)? Is there someting equivalent to the way Polycom phones do it? -- Carlos Chavez Director de Tecnolog?a Telecomunicaciones Abiertas de M?xico S.A. de C.V. Tel: +52-55-91169161 Ext 2001

The problem with the extra ptime descriptions in the SDP has been fixed in Asterisk (see http://lists.digium.com/pipermail/svn-commits/2006-October/017694.html). I've got the latest version of the 1.4 branch from SVN and have verified that the codec negotiation is working again. If you don't want to try the latest SVN version, then you'll have to restrict the phones to a single codec

I'm having problems getting my aastra 480i to register with the asterisk server. I can inititate calls from the phone, but >sip show peers does not show any IP address registered for this phone. I am probably missing something stupidly simple. Anyone have an example config to share or corrections for my configuration? Asterisk 1.2 aastra 480i CT has the 1.4 firmware <sip.conf>

I have some phones (and an ATA) that are shared between two users who each have separate voicemail but they are not behaving as desired nor expected. Incoming calls show up on the correct lines. Calls originating from the device are seen, at the terminating device, as coming from the account listed last in sip.conf, regardless of the line selected. This creates three main issues I would like

I have a dilemma. I am trying to setup an asterisk setup for about 10 people, but with the ability to expand to 100s. We are looking into hardphones to use for our systems. Here are the requirments I am looking for: SIP Not POE Full duplex Speakerphone $100-$300 We would like to have the cordless and corded option if possible (at least for 3 of the 10 people). So here are the

I realized today after much playing around that the Aastra 480i phone (I'm assuming the others as well), will freeze and can be reproduced if all of the following is true: 1. You enable auto answer in the configurations 2. You call from an Aastra phone to another Aastra phone using the alertinfo that auto answers the phone. 3. You hangup and then try using a softbutton programmed as a

Does anyone have success in upgrading Aastra/Sayson 480i CT firmware? All I get, no matter what I've tried is "Unable to upgrade firmware". tftpd is working because the dialplan freshens, and I have aastra.cfg whatevermacaddressfile.cfg and firmware.st in /tftpboot Am I missing something stupid? Is there another way to upgrade it? Chris Coulthurst chris@shuksan.com

Anyone know what the POE draw is for the Aastra 480i phones? We have switches that will do 15 watts on 12 ports but only do 7.7 watts on all 24 ports. A Cisco 3560 switch will do 15.6 watts on all 24 ports. Just trying to find out if we need that much power. Can't seem to find any info on the Aastra site. Comments?

Try a Nokia E61/E62... Version 3 supports SIP and WiFi and they have a big battery that allows long talking and standby times. CS -----Urspr?ngliche Nachricht----- Von: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] Im Auftrag von Justin Moore Gesendet: Donnerstag, 24. Mai 2007 10:16 An: Asterisk Users Mailing List - Non-Commercial Discussion Betreff:

Environment: Asterisk 1.2.14, FreePBX 2.2.0, Aastra 480i IP telephones firmware version 1.4.1.1077. Problem: Intercom feature: the dialed phone does not play the splash tone when auto-answering an intercom call. Otherwise, intercom works perfectly. Questions: What is the extensions.conf syntax to trigger a splash tone in Asterisk 1.2.14 (from the documentation and posts I've found, it has

There is no release note, just a text file that says AASTRA TELECOM INC. February 2006 FC-000046-01-07.st - 9133i Generic SIP Firmware 1.3.1.1095 for customer release. ________________________________ From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Gareth Owen Sent: 15 February 2006 02:00 To: asterisk-users@lists.digium.com

But where do can you get this later firmware from? I'm still on 1.0.0.78 on my 480i. Regards Lee -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Peter Passchier Sent: 05 August 2005 00:04 To: asterisk-users@lists.digium.com Subject: [Asterisk-Users] AASTRA 480i Firmware 1.2.0.162 SIP ALERT_INFOproblems

I have two Aastra phones, a 6730 and a 6757, both connected to Asterisk v1.6.2.1. They can call each other's extensions (and make and receive calls otherwise), but they cannot transfer calls, not even to outside extensions on the PSTN. The procedure I use is to accept a call on one phone, press the transfer button, dial the other extension, and then press "transfer" again after the

Getting "no service" display on aastra 480i. Sip debug shows an "unathorized" blub when the aastra tries to register. Some reading indicates that 1.4 firmware wants aastra.cfg and mac.cfg in /tftpboot/. There are none. Anyone have basic config files? Or can point me to a good link? All links I have tried, that purport to have config files, are either dead or error out.