similar to: Compiling chan_bluetooth

Just to close the thread. The problem was that I was using an old version of the code. If anyone has the same problem, you can download the code from here: http://www.thetechguide.com/howto/asterisk/bluetoothfiles.tar.gz Good luck, Danko ----- Original Message ----- From: "Danko Miocevic" <danko@santirso.com.ar> To: "Asterisk

The short of it: I am unable to compile chan_bluetooth on Asterisk 1.2.1 on CentOS 4.2. I installed using the Asterisk@Home 2.2 iso. Server is a plain Celeron 2.93GHz box. Asterisk source is in /usr/src/asterisk, newest chan_bluetooth source is in /usr/src/asterisk-test/bluetooth/chan_bluetooth (I have two older versions in other directories). Steps taken: Followed the instructions here to a

I have compiled chan_bluetooth and I have used it many times before... but now I have a problem and I can?t find a solution. I have a bluetooth dongle (MSI) connected to my asterisk and I use a V3 phone to make calls to another cell phones... the thing is that I just get one way audio.. I can hear people from my IAX softphone but they can?t hear me... I don?t know what could be.. anyone had

Hi, i was reading about connecting a cellular phone over chan_bluetooth. I was wondering, if one is able then to make/receive concurrent calls or if you can make just one at time? Peter

I am running Asterisk 1.0.9 with chan_bluetooth (kernel 2.6.11) I have managed to get the module loaded and it connects to my phone and dials (Nokia 6310i) okay, but once the call connects I hear no sound on either end. It is not who I am calling since it works with any other bluetooth headset or without one. It isn't the SIP phone or codecs because they work with any other number. I think

Has anyone had experience with Theo's chan_bluetooth with asterisk-1.2.0 on FC3. When I try to make a call to my home through the channel my phone shows calling but my home phone never rings. I get this on screen: == Spawn extension (outgoing, 3234600, 2) exited non-zero on 'SIP/2299-9131' -- Executing Dial("SIP/2299-7743", "BLT/John/3541107") in new stack

I have been looking at chan_bluetooth, so far being unable to make it compile with Asterisk SVN trunk. I was wondering about the different ways it can be used. What I have read so far implies two possibilities: 1. Asterisk pretends to be a handsfree unit, and can use the cell phone for placing calls over the mobile network, or answer inbound calls from the mobile network. 2. Asterisk

I googled on this for about an hour and the most relevant hit I got was, of course, the first hit: http://www.sowerbutts.com/linux-mac-mini/#support In it, he indicates that the stock Bluetooth module "should work, but untested" - he doesn't qualify the statement with anything. Has anyone tried chan_bluetooth or even the Bluz stack on a Mini or a G5? If so, under Linux or OSX?

Editing subject line to reflect current status. On 1/26/06, Nilesh Londhe <lvnilesh@gmail.com> wrote: > Since T616 is not answering (and incoming calls are going to Cingular > voicemail after 30 sec,) I suspect the problem focus area is... > > > -- Executing Answer("BLT/T616", "") in new stack > > Is

I have a Motorola Razr successfully connected to asterisk using a bluetooth dongle and chan_bluetooth. Here's some issues I've run across: - You have to ignore the instructions in bluetooth.conf, saying to run "sdptool search --bdaddr xx:xx:xx:xx:xx:xx 0x111F" to determine the correct channel to use for your phone. My phone reported Channel 7, but will not work with anything

If anyone can help im trying to get my jabra bt200 or bt250 headset working with chan_bluetooth. They seem to pair ok but they will not come out of "Negotiating" state. I get this on first start of *: [HS] jabra > AT^SPTT=? [HS] jabra < ERROR If anyone can be of help please advise, im pulling my hair out on this one. Thanks Jason Price NOTES: JABRA BT200/250

asterisk-users-request@lists.digium.com is believed to have said: >Bluetooth enabled phones to talk to Bluetooth headsets; I guess there's a >protocol for the phone to talk to any Bluetooth headset, no matter who made >it. This protocol would have to include something to allow voice to pass >from the phone to the headset and vice versa. It might also include >something for

Hello, I start trying to use a USB dongle and a Bluetooth GSM phone to make GSM call with asterisk using the BLT channel provided by the GSM phone. Unfortunately I get a "Everyone is busy/congested at this time" whenever I try to Dial("IAX2/****@****/2", "BLT/MotorolaLara/3474501***") For sure I make some mistake in the configuration. Unfortunately I don't find

I've just set up 1.0.9 with chan_bluetooth.so, my Nokia 6680 registers and I can dial out and the called phone rings. The problem is that the Nokia keeps ringing it doesn't know that the call has been answered. (System is SFR calling to France Telecom POTS) Any thoughts? -- Dave Cotton <dcotton@linuxautrement.com>

28th February I am working with Asterisk 1.2.15. I have configured sip.conf for two soft phones (I am using Xlite).I have installed the Bluez stack and so far, i manage to make a phone call from a soft phone to a GSM network. However, i have an audio problem. The soft phone can be heart by the GSM costumer but the voice in Xlite is not transmitted to the GSM. In asterisk all i got is the

I'm looking at version.h installed by Asterisk 1.2.3/4 - and the default value is 000000. I thought the value should be 010200. I know many people have problems compiling chan_bluetooth because of this inconsistency. Anyone has the last word on this?

I've seen in the wiki that it is possible to use a celldock device to use a cell phone as a PSTN line to Asterisk, but I haven't seen any comments as to how well this actually works. I was thinking about hooking a celldock to a FXO input of my Digium TDM400P card and use it to connect via bluetooth to my RAZR V3C. I am aware of the software solution (chan_bluetooth), but my Asterisk

Mine goes to chan_bluetooth. Somewhat of a pain getting it going but I am totally floored with how cool it is! Thanks, Steve Totaro

Where can I get some asterisk books.. or tutorials..? I?ve been searching in google.. but I find just some tutorials explaining how to fast set up an asterisk server. I want to learn how to use it and how to make my own configurations. So, the thing is that I want to know what is the best book or tutorial that you know? recomendations? Thanks to everyone... Danko Miocevic

Hello, Quick question. I have written a C function - I would like to make it return two vectors to the R environment - one STRSXP vector, and one INTSXP vector. Is this possible/ easy to do using the API? I looked, but could not find the answer to this question in the "Writing R Extensions" guide. Thanks very much for your help! Charles [[alternative HTML version deleted]]