similar to: RV: DELL PowerEdge 2850 and TE4110P and TE110P

Hi All Before I go out and buy a DELL PowerEdge 2850 has anyone had problems (or any other useful experience) getting a TE411P to work with it. I also have a legacy TE110P. Has anyone had problems with this combo. -- Dr. Rodney G. McDuff |Ex ignorantia ad sapientiam Manager, Strategic Technologies Group| Ex luce ad tenebras Information Technology Services | The

I am trying to get the temperature of a Poweredge 2850 with CentOS 6.3 on it. Has anybody on this list done this successfully? Thanks -Surya PS: Apologies for cross posting if you are on the Poweredge list. -- Surya Saha Department of Plant Pathology and Plant-Microbe Biology Cornell University, NY, USA http://www.linkedin.com/in/suryasaha

Did anyone manage to have xen (3.0.1 stable) run on this config? (this is on FC4 if it matters). I''ve tried recompiling the xen0 kernel with the Fusion options from my current kernel added, but it keeps removing some of them (maybe some that didn''t exist yet in kernel 2.6.12), and it seems I end up without the correct driver. If someone has this running, I''d be

Hi all, I got the previously mentioned Dell Poweredge 2850 with 4GB RAM and Perc4e raid controller. Installation went well and the raid is pretty fast even with level 5. However I have another problem now... CentOS 5.2 only sees 256MB RAM. Googling a bit, got me to install kernel-PAE, this went well, but CentOS still sees only 256MB. Googling some more, I found a bios update was suggested and

It's Digium, not Dell. I have two identical Dell 1850s, each with the allegedly offensive built-in E100 Ethernet ports. I placed a TE410P card in each. One worked great, the other would not modprobe. Upon examination, we discovered that the two TE410P cards had different firmware revisions. Turns out the one with the older version was the one that worked. We sent the second card back

Hello, Just chiming in here: >From: asterisk-users-bounces@lists.digium.com >[mailto:asterisk-users-bounces@lists.digium.com] On >Behalf Of >bdolljr@bigskytech.com >Sent: Viernes, 22 de Julio de 2005 01:24 p.m. >To: Asterisk Users Mailing List - Non-Commercial >Discussion >Subject: RE: [Asterisk-Users] Dell Hardware >> Mmhh nice !! So, why did Digium forbid it :)?

Hi all, We are running Asterisk 1.2.7.1 on our Dell Poweredge 2850 and are having massive sound quality issues. We are experiencing call quality issues for our remote location, namely calls cutting out and breaking up for our agents. The two main issues seem to be 'popping' and 'dropping' - popping would be pops and crackles on the line, where dropping would be complete audio

Hi, recently I came across a deal on a bunch of Dell PowerEdge 2850 servers and I was hoping to use them to run Debian with Xen to provided virtualization support for Windows 2003 and other Debian installations. I was hoping to install 2 copies of Windows 2003 as well as 2 copies of Debian all on top of the DOM0 Debian installation. The servers have dual 3.2ghz CPU''s and include 16GB

Hello, Digium uses the Dell PE 2850 for their testing. This site says that 3.3V PCI slot. http://www.voip-info.org/wiki/view/Asterisk+hardware We are planning on purchasing a Dell PE 2850 and putting a TE205P card on it. However, the needs a 5V PCI slot. Does Dell PE 2850 has a 5V PCI slot? A person in our group tried to call Dell's customer support but they do not seem to know.

Hello I have a problem to boot my xen kernel, I have a debian sarge 3.1 stable, download xen-3.0.2-src.tgz, extract and compil it with the command "make world" But at boot I have an error : "cannot open root filesystem sda1" My raid controler is a perc4/di raid 5 controler lspci -v said : 0000:02:0e.0 RAID bus controller: Dell PowerEdge Expandable RAID controller 4 (rev

On Fri, Dec 5, 2014 at 3:23 PM, Rodrigo Montiel <guevara2309 at yahoo.com.ar> wrote: > Hi masters, > > I?m not an expert on this my friends, but I?m trying to understand which the > expected behaviour is from Asterisk side when you deal with the following > scenario: > > Caller ?> GSM Gateway with SIM card A ?> Asterisk queue ?> extension 1000 > > GSM

> -----Original Message----- > From: Remco Barende [mailto:asterisk@barendse.to] > Why is it bad to put a vpn server on the * box? CPU load. IPSec can be quite CPU intensive. So can asterisk. Putting two CPU-intensive, time-sensitive applications on one machine is asking for trouble. It may work, though, if you don't have too many simultaneous users. > I was considering

Has anyone had any compatibility issues with a TE110P card installed on a Dell Poweredge 1950? I noted the following error on the LCD display of the Dell Poweredge 1950: E1711 PCI PErr Slot 1 E171F PCIE Fatal Error B0 D4 F0. The Dell hardware owners manual states that it means the system BIOS has reported a PCI parity error on a component that resides in PCI configuration space at bus 0,

I currently have a single server with a few SIP and IAX upstreams for origination and termination with IAX clients. I am adding a second server that will have a much higher capacity and will be handling a larger call volume. However, this second server is not going to be geographically near the first. It will largely share the same upstreams. I would like for this to be an integrated system

Does anyone know if you can have multiple TE110P cards in one chassis? -Thermal -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20061011/adbceeb5/attachment.htm

Hi, Any folks on this list who have installed CentOS 6.3 on the new Dell Poweredge R815 servers? How was your experience? Thanks -Surya -- Surya Saha Department of Plant Pathology and Plant-Microbe Biology Cornell University, NY, USA http://www.linkedin.com/in/suryasaha

The issues I''ve had with PE2650 and Linux in general all related to a lack of IRQ''s. I had to disable all non-essential devices in the BIOS (lpt, usb and com). It seems the BIOS on that server still has legacy IRQ issues (< IRQ15). In my xenU''s I also renamed /etc/sysconf/hwconf so it would''nt try to init any hardware devices directly. Maybe these options

This error appears when y try to login into a SQL server . I run the aplication Silverlab.exe ( in VB6) , and in the first windows appear a image and two butonms 1 for exit an 2 to login ... I press a bottom "Login " and .... in a windows the wine put: Database Engine Open Error ! Server Name : Connection_String = Provider=SQLOLEDB.1;Persist Security Info=False;User ID=sa;Initial

I thought of creating an htb class for each user, but as you said I haven''t got enough bw to do soo. That’s why my setup only has 5 classes with WRR queues so I get sure each user doesn’t affects the other users. On top of that I have an iplimit to a maximum of 15 parallel connections per user. So I get the following conclusions: A) change link B) upgrade to kernel 2.6 and use l7

Ronald, Grandstream products have a one year warrantee. If you don't have any luck with Pulver, contact us and we can probably get your phones exchanged. Please don't assume that your experience with Grandstream is typical. We sell a lot of these phones and the overwhelming majority of the purchasers are very happy with their units. The quality has improved tremendously over the last