similar to: Office to Office via IAX2 problems

Setup: Office A: router: Linksys WRT54GS running SVEASOFT Alchemy-pre7a v3.37.6.8sv Asterisk: v.1.2.4 static IP Office B: router: Linksys WRT54GL running Linksys firmware v4.30.2 Asterisk: v.1.2.7.1 dynamic IP (using dyndns name) Office A is set up with refresh dns and cron job for iax2 reload every 5 minutes. It rarely looses connection to Office B. Surprisingly, Office B is the one loosing

Hello List, I am currently having a bit of a strange issue with a pair of asterisk servers that we recently set up. For a bit of background, this particular business has two sites in two different towns, about 10 minutes apart. They have 3 analogue PSTN lines connected to the asterisk servers at each location, via a Sangoma A200 (with HEC). They are trying to have just the one receptionist for

Hi everyone, I am trying to connect 2 asterisk servers via IAX, but it just fails to do so.. I'm using SIP to connect the IP phones on the LAN at the 2 different physical locations where each server resides and I'm able to communicate on my LAN via SIP without any issues. The problem is that I'm unable to make Asterisk servers talk with each other via IAX.. Here is my issue.

Have asterisk@home 1.2.1 The server is on an internal network eg 10.10.10.10 It is NAT'd 1:1 via Checkpoint firewall to external public IP eg 50.50.50.50 The remote IAX2 phone (ATCOM320) is configured to call 50.50.50.50 on extension 1055. Outbound calls to 1055 work perfectly. Inbound calls from 1055 get picked up as if it were an external call (see below) and goes straight to the ring

Hello, I have just set up an asterisk box (Debian unstable) and I would like to test it with a H.323 application (gnomemeeting). When I call the demo voice menu, I can't hear any sound. asterisk says that the soundfile is played: -- Executing BackGround("H323/ip$212.9.189.172:30005/29597", "demo-congrats") in new stack -- Playing 'demo-congrats' (language

Hi, I've tried to upgrade my asterisk to 1.2.3 again after disastrous bug incident yesterday but when I called and the phone was picked up, there was simply busy tone... Weird, is this another bug in asterisk 1.2.3? Currently, I rollback again to asterisk 1.0.10...:( Is there any configuration change issue in 1.2.3 cause I've just used my configuration that worked in asterisk1.2.2 ?

I am having a problem with your my nufone service. I'm trying to setup incoming calls and I'm having no success. Outgoing works fine though. The message I'm getting is "the person you are call is not currently reachable". I'm going to give you as much info as I can. I'm also an asterisk newb! Anyways, I installed asterisk@home. Set up extensions which communicate

I went to put in the new sound files over the weekend, but forgot to backup the custom folder and lost my custom digital receptionist files. I then had to copy the old files back from a duplicate machine. The problem is now though that voicemail just hangs up when I dial it. Other apps work - *70 for example gives me 'call waiting...activated' so I know it's accessing the files

Hello! I have a number of IAX clients behind a NAT (on the same LAN) and asterisk server on the Internet. And that clients doesn't speak directly to each other, traffic goes through the asterisk server. What should I configure to make IAX clients on the same LAN to speak directly, please? notraster=no is set in iax.conf The asterisk server is on real IP behind a NAT (at DMZ with full 1-to-1

Hello all, I hope this is not off-topic, if it is please let me know. I'm currently playing with an Asterisk at home, in order to get to know it's ins and outs. Very very impressive indeed. I've got it hooked up to my home phone line via a Wildcard clone board (Intel modem with Ambient chipset), and it works like a charm. Zaptel picks up the card as a generic clone, and works with it

I've had an spa3k in service here at the house for a while now. After some initial wrangling, it's been working okay. I've had to reboot it a couple times and have noticed something rather annoying though. My setup is pretty simple and, dare I say, common. I have the SPA-3000 "inline" between my incoming POTS line and the internal house phone. It's setup to deliver

Hello list! I?m having an issue when reloading Asterisk, I?ve had this problem in Asterisk 1.6.1.6 so I upgrade to 1.6.2.1 version, but I still have the same error. For example, I send a "reload" in Asterisk CLI and this is the output: isb152*CLI> reload == Parsing '/etc/asterisk/extconfig.conf': == Found == Parsing '/etc/asterisk/manager.conf': == Found

I've added an introduction article about the ARA on my web site http://www.voip-forum.com/ The same text is now also added to CVS head as README.realtime. On the same site, you will also find the news item about how we used Asterisk for a call from an airline jet above Greenland to Stockholm, Sweden. The world is getting smaller and more connected every day! /Olle

Hello, i try to setup asterisk with hylafax: the config is: egrep -v "(^#|^$)" /etc/hylafax/config.ttyIAX0 CountryCode: 49 AreaCode: xxx FAXNumber: +49xxxxxxxx LongDistancePrefix: 0 InternationalPrefix: 00 DialStringRules: etc/dialrules ServerTracing: 1 SessionTracing: 11 RecvFileMode: 0600 LogFileMode: 0600 DeviceMode: 0600 RingsBeforeAnswer: 1 SpeakerVolume: off GettyArgs:

https://bugzilla.mindrot.org/show_bug.cgi?id=3170 Bug ID: 3170 Summary: Sometimes sshd responds with different server signature Product: Portable OpenSSH Version: 8.1p1 Hardware: ARM OS: Other Status: NEW Severity: normal Priority: P5 Component: sshd

Hi, We are using VOIP-SIP gateway to route outbound PSTN calls. Recently, I am getting == No one is available to answer at this time message, after making 5 SIP attempts (Retransmitting #5 (no NAT):), and the calls are going out through alternate Zap-trunk. I do not see any hit (sip-debug traffic) on the voip-gateway for the failed calls. Strange thing is that this is happening randomly,

I run VMWare server 1.07 on Centos 5. Last night I left a Windows 2000 virtual machine doing a ClamWin scan of drive M: when I went to bed around midnight. Drive M: is actually a volume on the Centos 5 host, mounted via Samba. It has about 40Gb of photos on it, plus a few other things. I had the VM up visible in the VMWare Server Console running under KDE on display 8 (X session #1), my

Hello, I have 2 offices connected through VPN (all ipv4 and ipv6 traffic allowed), every office with it's own subnet. I built a DC in office1 for mydomain.local, built a second one in same office and joined mydomain.local with no problem. Then i built a DC in office2, but when i try it to join mydomain.local, the join process blocks at "Setting account password for OFFICE2-DC$" and

I have several branch offices all running Asterisk PBX's that register to each other via SIP so that calls can be transferred from office to office. Everything is working great on the office to office transfers, but I'd like to somehow make the CallerID more useful. Currently if an extension at Office1 dials an extension at Office2 the CID on the phone at Office2 says

via google, I found the reference regarding digit maps for the Polycom phones: http://lists.digium.com/pipermail/asterisk-users/2005-January/082884.html But I don't see any instruction for prepending digits to the number dialed. Does anyone know how to prepend a digit to the number dialed (from the Polycom side, not Asterisk)? I can do this pretty easily on a Sipura. i.e. Say I want to