Displaying 20 results from an estimated 2000 matches similar to: "Please help on chan_h323."
2008 Feb 08
1
(no subject)
Hi,
I am trying to communicate H323 and SIP users. I have configured h323.conf, sip.conf and ooh323.conf. If I am using gatekeeper (gnugk) then I am able to call successfully to h323 users using SJphone. And same for SIP users also.
But when I disabled gatekeeper and trying to call using gateway with sjphone then every time whatever number I dial the call goes to asterisk and some computerized
2004 Sep 07
0
chan_h323: remote ip address -> context
Hi,
I'm looking for a mean in chan_h323 to jump to a specific
context dependent on the remote ip address.
E.g. an argument, let's tell it "ignore_h323_name", in h323.conf
users like this:
[BillyBob]
ignore_h323_name=yes
type=user
host=1.2.3.4
context=path1
in a way, every incoming call from ip 1.2.3.4
will fit this user, not only when the H323-name is BillyBob.
Or a variable
2005 Jul 08
0
GnuGK Nufone H323 -HEAD - Prefix issue
Greetings-
As most of you who monitor this list know, I've been messing about
with Asterisk -HEAD, Cisco Callmanager, and the nufone H323 channel
driver here for some time- with pretty decent success. I'm hoping to
cash in a chip here- I've run into something that is probably a very
simple answer, yet not found a decent reference to resolve it.
Scenario- -HEAD as of last week
2004 Sep 16
1
ERROR[16384]: chan_h323.c:1987 load_module: Gatekeeper registration failed
I'm trying to configure Chan_H323 to register with GnuGK... without
success... i've failed finding sample configurations.
I'd greatly appreciate anyone who can provide sample config of H323.conf
and gnugk.ini
I am tyring to configure Asterisk as a neighbor in GnuGK.
I'm always getting this error on Asterisk.
ERROR[16384]: chan_h323.c:1987 load_module: Gatekeeper registration
2004 May 04
1
Asterisk and windows h.323 gatekeeper calling problems...
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Hi there, i have a working Microsoft ISA firewall with buildin H.323
Gatekeeper....
So Far, i got registerd the asterisk on the M$ Gatekeeper...
here is the h.323 configuration:
; Open H.323 driver configuration
;
[general]
port = 1720
bindaddr = 0.0.0.0
allow=all ; turns on all installed codecs
dtmfmode=rfc2833
gatekeeper =
2003 May 22
2
Symbol NetVision phone with chan_h323 - Complete Success!
Just thought I'd share my success with chan_h323 and our Symbol NetVision
phone (4046-100-US).
Voice quality is excellent, and setup was trivial. The new NetVision
firmware (4.21) is much better than the 3.x stuff. It gives the phone a
whole new look and feel.
The hardest (and longest) part was getting OpenH323 compiled. After that,
H.323 ran out of the box. I simply uncommented
2006 Mar 24
1
chan_h323 problem
Hello,
I installed Asterisk from CVS on Redhat Linux 9 and working with chan_h323 module and g729/g723 free codecs too.
My network connection diagram:
----------------------------------------------
X-lite/X-Pro-->Asterisk--chan_h323-->GnuGK--->AS5300-->PSTN
boldsoft*CLI> show version
Asterisk CVS-v1-0-03/24/06-15:27:08 built by root@boldsoft on a i686 running Linux
I can make
2005 Sep 11
0
OpenH323-Channel Q.931-Problems with Gatekeeper
Dear Mailinglist-User
currently we`re working with an IP-PBX, based on Asterisk, with SIP, H.323
and ISDN-Capabilities.
SIP and ISDN works fine, but H.323 not.
In our first test, we started to connect Asterisk to an Cisco IOS-Gatekeeper
with the "chan_oh323" (version 0.6.5).
We successfully tested in/egress calls without any problems.
But when we started to connect our Asterisk
2003 Sep 17
0
chan_h323 as a gatekeeper?
hi
IIRC, Jeremy once said that chan_h323 could be used as a gatekeeper but
perhaps lacking a few features as compared to gnugk. Is this possible? I
have some dlink DPH-100H phoes here for testing, but they require a
gatekeeper, and if I can do it, I'd love to keep gnugk out of this.
thanks
roy
2004 Sep 08
0
asterisk+chan_h323+redhat9 troubles
hi,
i had asterisk and gnugk running on fedora core 2. it worked quite well. then, i needed
to change to red hat 9, and i'm experiencing troubles with h.323 :-( making a call from
a h.323 phone (innovaphone) does not work, and dial-in also doesn't. below
is an excerpt of what happens, when i try to dial-in my extension (126). it takes
about 10(!) seconds, until the 'Called 126'
2003 May 20
1
chan_h323 core dumps
hi
just after talking to Jeremy, I downloaded the source he's using and compiled.
core dump! This was without gatekeeper:
(gdb) bt
#0 0x40141118 in mallopt () from /lib/libc.so.6
#1 0x401400fc in malloc () from /lib/libc.so.6
#2 0x405e981b in PAbstractArray::SetSize(int) () from
/usr/src/pwlib/lib/libpt_linux_x86_r.so.1
#3 0x405ed006 in PString::SetSize(int) () from
2005 Mar 20
0
H323 Gatekeeper Registering Question
Hello,
I'm trying to register with a gatekeeper using chan_h323, I have a
Login, Password and a user (telephone) number,
This is my h323.conf
[general]
port=1720
bindaddr=x.x.x.x (my fixed IP)
gatekeeper=x.x.x.x (gk ip)
allowgkrouted=yes
allow=all
[xx] (my login)
type=h323
e164=111 (my assigned phone number)
secret=1111 (my password)
context=incoming
I'm getting this error when trying
2004 May 13
0
IVR with chan_h323 module
Hi there,
I have the following scenario:
I have a GK that controls my H323 GWs. And, I am needing an IVR royalty-free
system. More than an IVR, it's only something that should play a sound file
depending on the called digits.
So, I wanted to use asterisk as my IVR. So, I've installed asterisk with the
chan_h323 module and used the Playback comand in my extensions.conf
2005 Mar 15
0
What different between asterisk-oh323 andastersk's chan_h323 ?
I have one and only one reason to use OH323, and that is it
works with Cisco's CallManager. The standard H323 channel
has one-way audio issues when connected to CCM and fixing them
has been identified as a low priority/never going to happen
task.
Dan
-----Original Message-----
From: asterisk-users-bounces@lists.digium.com
[mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of
2003 May 26
3
chan_h323 and extensions.conf
Hi all,
I try to ask helps again about chan_h323 extensions.
I define this in h323.conf:
[general]
port = 1720
bindaddr = 0.0.0.0
allow=gsm
allow=ulaw
gatekeeper = DISABLE
context=default
[gm1]
type=friend
host=192.168.1.20
context=default
[gm2]
type=friend
host=192.168.1.25
context=default
and I have in extensions.conf :
[demo]
2005 Mar 13
0
What different between asterisk-oh323 and astersk's chan_h323 ?
Dear ALL:
I find that everybody discuss with asterisk-oh323 instead of chan_h323
of asterisk channels. Why do they choose asterisk-oh323 and not use
the build-in module (chan_h323)? What different between these two
componments?
In my guess, the build-in module should be easy to implement rather
than setup another application(asterisk-oh323) expect some bugs or
failed functions on chan_h323.
2004 Dec 17
1
Forcing E.164ID with chan_h323 & or chan_oh323
I am trying to figure out the correct way to send my E.164 ID with
chan_h323 and or chan_oh323 as my H323 provider requires this in the
format of 'account-pin'.
With chan_oh323 I have been able to register with the gatekeeper and
can recieve incomming calls, but outgoing calls do not work.
With chan_h323, I can call H323 clients (netmeeting, ATAs etc) but
cannot place a call through my
2007 May 30
0
Configuring Asterisk as Gateway SIP-H.323 via ooh323
Hi,
I'm trying to configure Asterisk as SIP-H.323 Gateway via ooh323, but I have
an error relatively to the GK Confirmation message.
>From the log:
"H323 RAS channel creation - succesful
Sent GRQ message
Gatekeeper Confirmed (GCF) message received
ERROR:No Gatekeeper ID present in received GKconfirmed message
Ignoring message and will retransmit GRQ after timeout
Error: Failed to
2005 Jul 07
0
h323 how to ?????
I try to get H323 to run, but have so far only partial success:
There is a Gatekeeper GK, where asterisk connects to.
The Gatekeeper sees Asterisk, and Asterisk sees the gatekeeper.
From the Network on the GK, asterisk is reachable via the number
070333333. I have an extension on asterisk 6002, which is reachable.
I try to call a number attached to the gatekeeper (070168177) with the
2005 Feb 16
0
Outbound calling timeout
I am running asterisk 1.0.1 with OH323 compiled in.
We have a 323 trunk to CallManager with a mgcp controlled pri router.
When using sip phones (directly registered with asterisk) to call out
the 323 trunnk to PSTN, calls timeout after 3 rings. If I answer b4 3
rings - no problem, otherwise I get "no one is available to answer at
this time" on the consoel and it redirects to an