similar to: FW: WiFi / GSM VoIP Handsets..

I use dovecot to push email to my SE P1i and it works very well. :) However, I have two email accounts set up on the phone, one using my domain for GPRS and public WiFi and one using my WLAN address for use at home, the idea being I don't want to pay for GPRS data at home. The trouble is the GPRS account remains logged on and I get the mail in both inboxes. There is no option in the email

I have a Broadcom 802.11b/g hardware on my dual-boot laptop. Note first that in the WinXP partition, the wifi makes DHCP connections to my router with no problem. Since this was not working in my new CentOS 6 partition, and remembering that there was a driver problem with the old Fedora partition it replaced, I followed instructions founs at:

Hi Guys, is there a client which can be used on the SonyEricsson P800/P900...? IAX would be cool, but i take anything that can connect (via bluetooth) to an asterisk-server ;-). The phone is Symbian, and can also execute java-stuff... Greez Andreas _________________________________________________________________ Find your perfect match @ http://personals.xtramsn.co.nz with XtraMSN

hi list members, my goal is to make one of my DomU''s act as a wireless accesspoint... So, i need it to have access to the pcmcia wlan card attached to dom0. But how ? when i give the pci=[] option to the domU config file its shows up with lspci but i cant use it... (on debian with module-assistent get rt2x00 in de DomU) Is it possible or would it be better to use a more direct interface

Greetings: I'm just installed Centos-4 on an IBM T-21 laptop. So far so good. Now I'd like to pop in a wireless lan adapter. I'm looking at a buying a Linksys WPC54G adapter (although I haven't done so yet). After doing some searching, it looks like the best way to get this card working is via ndiswrapper [http://ndiswrapper.sourceforge.net] and then to use Windoze

Hi folks! First post here, so please don't bother if it's not the right place to post those kind of questions. I'm currently running a 4.7-release (upgrade to 4.8 planned but not yet started) on my production box. As I would like to setup a small WLAN (major use for my notebook, other clients are possible) I need to know which cards are really supported. The handbook is IMHO not

Hello, I''ve installed xen-4.1.1 on with Gentoo xen-sources-2.6.34-r4 (both dom0 and domU) on an AMD athlon XP 32 bits. I PCI passthrugh the whole USB-2.0 controler to the domU to gain access to my wifi dongle and everything works fine and stable. However, I''ve got an USB drive that I want to use on my dom0 wich requires USB-2.0 too and then cannot use anymore the PCI passthrugh

Hi everyone, My PC don't have an integrated WLAN card, so I bought an USB WIFI device which use the MediaTek MT7601U chip(image 'dongle.jpg'). ------------------------------------------------------------------------------------------------------ My PC specification- OS = CentOS 7.8.2003. Processor = AMD Ryzen 5 1600. Mother-Board = GA-Gigabyte A320M-S2H

tinc 1.0.19 worked fine on Raspberry Pi as long as my Pi was connected via ethernet cable. Today i changed the connection to wlan. Pi crashed. worse, it was no longer operational, even if connected via cable. recovery from backup before tinc was installed (yes, i had a backup ;) tried again. installed tinc: worked as long as connected via cable. crash after connecting via wlan. no longer

Hi list, I bought two UTStarcom F1000 phones, pre-equipped with the latest firmware, including WPA support. Those are configured to register to an asterisk server on the internet (not LAN), and registration works. Calling and being called also, with transfer and all bells and whistles. After a few minutes up to 5 hours (varies widely), the display tells me that an Accesspoint is not available

changed mode from router to switch on 2 Linux and 2 WinXP nodes. configured Linux bridging per the website and that worked for hardwired ethernet over cat5. For the wifi wireless xp clients, i didnt have any luck. Maybe i did something wrong, but it seems so easy to create a bridge in xp. highlight 2 or more nics, right click and choose bridge. Did it numerous tmes years ago, but not sure w

Although 1.4 is now released, there is one aspect of Shorewall''s design that I''m still quite unhappy with. It involves two areas: a) when and when not to create rules to allow inbound traffic on an interface to be routed back out that same interface. b) intrazone traffic. I''m currently running 1.4.0 plus a change that: a) Allows intrazone traffic unconditionally --

Hi, i want to ask about sip.conf & extension.conf the configuration. is it possibility to make sip.conf configuration like this [1510891531543268 at wlan.mnc089.mcc510.3gppnetwork.org] type = friend context = tutorial username = 1510891531543268 at wlan.mnc089.mcc510.3gppnetwork.org secret = 12345 host = dynamic and the extension.conf like this exten => 1510891531557268 at

Zitat von Steve Totaro <stotaro at totarotechnologies.com>: > Are you using the wifi on on the cellphone? The peer IP is showing as > 192.168.200.3 which is not a routable address. Unless things have changed, > double NAT configurations do not work. Hi Steve, My Asterisk is behind a NAT, but my cellphone was NOT in NAT, but direct in Internet. But maybe my Provider does a

Hi, If somebody is interested in having a crack at this (and think's they have a reasonable chance of succeeding) then there is a dev kit up for grabs. John, we actually already have a LM9638 (1280x1024, B/W) image sensor interfaced to the board. There is a colour version drop in replacement. We also have a color QVGA TFT hooked up for video out. So a good demo system would be to capture

I see that ABPTech are now offering this SIP Wifi phone. Does anyone have an experience with it? I've considered the Pulver/Zyxel wifi phone but would really rather have something that can handle WEP or WPA. I run an 802.11g wlan with 256 bit WPA encryption. This Hitachi phone looks very much like a cell phone, which could be ideal. Michael -- Michael Graves

Hi, this is my first pos here, please be lenient. My problem shuld be a FAQ and, in fact I found a lot of references googling around, but nothing could really solve my problem, so here I am. I have a Samba server: Very basic wheezy amd64 installation on a small VIRTUAL server (Xen). Only fancy thing is direct access to a couple of RAID1 (mirror) arrays where data is stored. I normally access

Hi! I have some problems with an bridge between wlan0 and eth0 device... It works and I can from both sides ping the router with the bridge device but I cant ping the devices from other net so I cant ping wlan devs from eth net and other way around the wlan card is an atmel usbw11 from linksys and eth is a intel e100 10/100mbit nic I have configured the bridge according to the how to and

Hi! We have an installation with WLAN SIP phones only. Sometimes we have connection drops. What is the best way to debug if we have problems with the WLAN or the SIP devices or the uplink to the IAX Provider. TIA, Mike

To all, I have a firewall with 3 NICS. eth0 connects to the Internet eth1 connects to a wired lan eth2 connects to a wireless lan In my rules, I would like to create a zone loc which encompassed eth1 and eth2 and create 2 sub-zones: lan for eth1 and wlan for eth2. Because I only want to open what I need on that firewall and because that firewall is also used for different services (I know