similar to: $1000USD for fix of Asterisk g726-32 codec

With sipura (I tried this with both the 3000 and 841) set to prefer the g726-32 codec, a call from the sipura to asterisk will use g726. Asterisk sip.conf has: disallow=all allow=g726 allow=gsm allow=alaw When the call is from asterisk to the sipura, asterisk will not use g726. It ends up using alaw. I usually use stable but I tried this with head too, and same thing happens. Anybody know how

Hello list, Grandstream GXP2010 phone calling to Snom 320, Asterisk in the middle. Grandstream allows for 8 different codec specifications. I have defined them as 4 x G726 & 4 x alaw. Snom allow for 7 different codec specifications. I have defined them as 3 x G726 & 4 x G729. The SIP peers are both defined as : disallow=all allow=g726 allow=alaw allow=g729 allow=gsm This is the

We are evaluating starting a small VoIP consumer based platform. What is the best codec to use with customers using primarily DSL as internet connectivity? I know that g729 is the king-all, but I want to know what the rest of the professional are using out there. g729 has a cost involved, so does the cost really offset the performance? Or is it better to go with g711 to start off? We plan

Hi, I am running FC1 with latest patches of 3/30/04, and I have the latest CVS as of this morning 3/30/04 of asterisk, zap and libpri. The SIP device I am using is a Sipura SPA-2000 with G726-32 "Forced". When I 'make clean" and recompiled zaptel, libpri, asterisk and start asterisk I can see: [format_g726.so] [format_g726.so] => (Raw G.726 (16/24/32/40kbps) data) ==

Ok, I built a test system to duplicate my problem and provide myself a platform that I can mess around with to try and break any features. My problem is G729 pass-through from a gateway to a phone. I think I even have transcoding working, which makes me more confused on what's wrong with my pass-through. It must be a configuration issue. The basics... *CLI> core show version Asterisk

Hello, I'm wondering if anyone has benn able to successfully get g726-16 passthrouhg to work? I am wanting to use this codec instead of g729 as I'm running out of DSPs using a high complexity codec on the Ciscos. I would think it would work just as g729 does, which has been working fine for me, but it does not. G726-32 does work great however, but it's like Asterisk doesn't

Hi everybody, A customer requires G726-40 with Asterisk... I know G726-32 is pseudo-standard, but he definitely wants G726-40... Is there any (easy) way, to integrate G726-40 into Asterisk? Has anyone done this before? Any hints? Please help! Due to a misunderstanding, my product manager already offered this to the customer and now i do not know how to do it... Thanks a lot in advance,

Ok, With everything restore on rtp.c, still I have no audio however the call is not destroyed immediately as before. I'm going to put a second Granstream box, and findout if between two boxes this happen too. I cannot believe that we cannot do 2 g726 on the same box at one time. Carlos -----Original Message----- From: Carlos Alperin [mailto:calperin@senecacom.net] Sent: Wednesday,

**** DRAFT **** DRAFT **** DRAFT **** DRAFT **** I've been using the DTA310 from Packet8.net for a couple of weeks. The DTA310 is about $130 without the Packet8.net VoIP service. It only supports SIP. On the back of the DTA310 is a power connector (power supply is provided with the product), a 10/100 Ethernet port, an FXS port, and a reset button. The front of the device has LEDs for

I am able to use sox to convert audio files from ulaw to wav (MS ADPCM), is there a way, using sox or another command line tool, to convert them to g726 ? ( g726-32 since it is supported by * ) tia, -baji. --

Hi All, We are experiencing a a problem when running calls over IAX with g.729. The call flow is as follows: Sip handset -(SIP)> Asterisk1 -(IAX)> Asterisk2 -(SIP)> Carrier The first Asterisk system is running 1.2 and the second is running 1.0. When using g726 from the handset all the way thru to Asterisk2(then 729 for the carrier leg) calls go thru fine, but when using g729, there

I'm looking for opinions on g726-32 vs. g711u.. They both have decent audio quality.. and looking at the wiki I get the impression that g726 is like the little brother to g711. Yet, I've run into quite a few sip termination vendors who don't support it. Does anyone on the list actively use g726 for anything and what have those experiences been? The g726 codec for me at least

Hi all, I would like to make a call using the asterisk IAX with g726 - 16 bits codec. How could I configure it in the iax.conf file. Do I need to modify the file like this? . . disallow = all allow = g72616k . . I have tried it but it hasn´t worked. Thanks in advance and best regards Guild __________________________________ Do you Yahoo!? Meet the all-new My Yahoo! - Try it today!

I'm having a horrible experience getting a Cisco ATA-186 to work with *. I can make calls from the ATA with no problems. However, incoming calls make the ATA ring once, and then the call is disconnected. I have no problems with my Sipura 2000 or my Grandstream phones. I am running 2.16.1 sip code on the ATA 186. Neither * nor the ATA is behind a NAT. They are both on public IP addresses

To me it's a error if I can't complete calls using the ATA configured to use the g726 codec. I just tried it usign a sipura SPA-2000 (preferred codec: G726-32) and I received NOTICES and WARNINGS, but I can't complete a call. On a zap channel: -- Executing Dial("SIP/2007-e4d8", "Zap/1/2217008") in new stack -- Called 1/2217008 -- Zap/1-1 answered

Hi Users, I was wondering if someone of you have the same thing on CentOS 64x? asterisk01*CLI> core show translation Translation times between formats (in microseconds) for one second of data Source Format (Rows) Destination Format (Columns) g723 gsm ulaw alaw g726aal2 adpcm slin lpc10 g729 speex ilbc g726 g722 siren7 siren14 slin16 g723

I have many endpoints and each endpoint has some parameter in common so i wonder is there any way to config one for all endpoints? Like in my example I have two endpoints and I repeat the same thing, [100] type=endpoint aors=100 auth=100-auth allow=ulaw,alaw,gsm,g726 context=from-internal callerid=device <100> dtmf_mode=rfc4733 use_avpf=no ice_support=no

Hello list, I have always though codec translation table is dircetly connected to system speed, utill i came across this: in my lab, i have 2 boxes, First box is an Intel Celeron 1.7 GHZ with 256M RAM: show translation Translation times between formats (in milliseconds) for one second of data Source Format (Rows) Destination Format (Columns) g723 gsm ulaw alaw

Hello Michael, you are referring to the following behavior - did I get it correctly?: outbound broken: asterisk offers g722 / g711 to provider (callee), callee answers g711. Asterisk now transcodes between caller and callee (g722 <-> g711). inbound works: call from provider: g711 -> asterisk drops g722 and passes g711 to internal callee -> no transcoding. As far as I know,

I have a ATA 186 with SIP firmware 3.1 when I changed the configurations to use the g.726 codec I received many erros and the calls doesn't work. I changed the fields: - LBRCodec: 6 <- the code for g.726 - TXCodec: 6 - RxCodec: 6 The errors: Jul 9 13:15:37 NOTICE[1192491824]: rtp.c:500 ast_rtp_read: Unable to calculate samples for format G726 Jul 9 13:15:37 NOTICE[1192491824]: