similar to: Broadvoice does it again

So it was all working well and then suddenly I'm unable to get incoming calls from BV. Outgoing is fine. I'm using AAH. I have the following settings; register=9738281625@sip.broadvoice.com:PASSWORD-GOES-HERE:9738281625@sip.broadvoice.com/2208 [broadvoice] username=9738281625 user=phone type=peer secret=PASSWORD-GOES-HERE qualify=1000 port=5060 nat=yes insecure=very

I did a quick google search of the lists site and couldn't find a definitive answer, so if it's there, I apologize for asking again. Starting about noon yesterday, I am no longer able to send/receive calls via Broadvoice. When calling in, I get a fast busy, and when calling out I get the following error: -- Executing Dial("SIP/112-572a",

Hi all, I signed up for BV over the weekend. I have set everything up as per their howto. I can receive calls to my BV number but cannot make any. I'm running CVS head 1/30/2005 so assume that the patch is already in my code. Am I correct? Is it the patch that's stopping me from making calls? Mark

I finally got my incoming and outgoing to work on Broadvoice with a configuration file that is no where close to the one given by them. Here it Is (sip.conf). For others who have a working config could u please share so that I could compare. Thank You [broadvoice] type=friend username=[number] fromuser=[number] secret=[password] host=sip.broadvoice.com fromdomain=sip.broadvoice.com

I'd be grateful if someone could point me in the right direction. I have a Broadvoice trunk attached to Asterisk which I use for frequent calls to the UK using the following in extensions.conf exten => _0[1-68].,1,Ringing exten => _0[1-68].,2,Dial(SIP/BV/01144${EXTEN:1}) exten => _0[1-68].,3,Hangup The caller hears immediate ringing, though it seems that Broadvoice

Let me start by stating that I've been thinking about setting up an unofficial broadvoice-users mailing list for a while. I've asked Broadvoice techs about it a couple times by phone and email and it looks like they haven't passed it up to the people who would make that decision or said people aren't interested in creating/maintaining one. If there's enough interest (read 10

Hello All, I have one X100P card for inbound calls. I use two Broadvoice SIP accounts for all my outbound calls. I'm unable to place calls using BV. Inbound BV calls are ok. Verbosity is at least 3 -- Executing Macro("SIP/201-365c", "dialout-default|XXXXXXX") in new stack -- Executing GotoIf("SIP/201-365c", "1?4") in new stack -- Goto

I can call my Broadvoice DID from a outbound caller-id blocked phone, and BV happily delivers the CID to Asterisk (and then on to my IP phone display.) I've tested with the *67 prefix from a PSTN phone to make sure it was supposed to be blocked. The number is always correct, but sometimes the the caller ID name is set to something funky (like a CO or switch center name.) I *think* this

HELP! Ok, so I have the following SIP.CONF: [general] context=default port=5060 bindaddr=10.1.1.200 externip = XX.XXX.XX.XX localnet=10.0.0.0/255.0.0.0 disallow=all allow=ulaw allow=g729 allow=g726 allow=alaw register => ##########@sip.broadvoice.com:XXXXXXXXX:##########@sip.broadvoice.com/1234 [sip.broadvoice.com] type=peer host=sip.broadvoice.com fromdomain=sip.broadvoice.com

--------------- Hi, I got hit with a funny one today; my configuration, which had been running fine for many weeks, suddenly stopped registering with Broadvoice's SIP. I switched among BV SIP hosts, verified my account was OK, even tried upgrading Asterisk. The weird thing was that I could associate OK with my WiFi SIP phone. So it looked like an Asterisk- specific SIP interoperability

Hi, We've been using Broadvoice with * for several months, mostly successfully. However, sometime last weekend (Sat, Dec 4 - Mon, Dec 6), BV seems to have stopped passing DTMF on incoming calls. We've not made any changes to the * system during this time. We even switched to using their DC server instead of the usual LA server, with no effect on the problem. We have applied the

I got a call from GV on Monday evening telling me they wanted me to move my Asterisk server over to a new IP address (216.229.127.40) by this saturday. Why the couldn't tell me this in an email is beyond me but anyways .. So I done changed the number and so far its all ok but whilst testing I noticed that I could no longer accept incoming phone calls. I swapped back and still no inbound

Hello All, I have 4 Broadvoice lines. If I call any of the lines it shows that is coming from the first line. exaple register=XXXXXXXXX1@sip.broadvoice.com:passwd:XXXXXXXXX1@sip.broadvoice.com register=XXXXXXXXX2@sip.broadvoice.com:passwd:XXXXXXXXX2@sip.broadvoice.com register=XXXXXXXXX3@sip.broadvoice.com:passwd:XXXXXXXXX3@sip.broadvoice.com

Hi, all. The asterisk setup is working fine, receiving calls via broadvoice "initially". ? When call comes in via broadvoice number, asterisk picks it up and routes correctly, as long as the call came in within ~2 min from the previous one. In other words, as long as a call comes in within ~2 min since the previous one, asterisk will answer the call. However, if the call comes in

I have been going crazy with this also since Sat. Our server was working perfectly with BV but will now not place calls to BV. Incoming from BV works fine. I felt sad rebooting it today, it had been running for almost 200 days! Here is my error message from the console... Notice I am running today's CVS Connected to Asterisk CVS-03/08/05-14:32:39 currently running on com (pid = 1624)

Is anyone else experiencing 404 errors on outbound dial with Broadvoice? I've followed the instructions posted by Broadvoice to configure sip.conf, and inbound calling works fine. Every time I try to dial out, I get a 404 "Not Found" error. Here are the relevant sections from my configs. sip.conf: context=broadvoice-in register =>

Hello All, I'm just getting into *, and trying to use a Broadvoice account. It works inbound, but Outbound fails no matter what sip.conf parameters I try. From the recent posts here I think it could be: A bad CVS release - I will try to download and build from a new one Broadvoice not challenging and/or Asterisk not responding with an Authorization: in the INVITE header. I am

I have configured asterisk with the AMP php configuration utility. I am able to make outgoing calls through broadvoice but incoming calls are sent to BV's Voicemail and never actually enter the IVR. When I show sip debug info through the asterisk prompt it actually reads the incoming call from BV but then issues a busy signal sending the call to BV's voicemail. I also modified

I just upgraded a box to 1.2.3 this morning after encountering the issues noted earlier on the list. Everything is great. In fact, a LOT better. In the past few weeks, I've been battling with BV to address dropped outgoing voice packets (the flipside is that I haven't experienced this with other providers during tests), and an annoying mechnical 'chirp' at the start of a call.

Hi all, I'm not sure if this is the correct mailing list for this (I was going to send to Asterisk-Biz, but seems more for this one). Anyway, I'm having more problems with Broadvoice. I still can't get calls unless I comment out the secret= line in sip.conf, but now I can't even place test calls to it from my cell phone. When I do, I get a fax macine. Debugging SIP shows NO