similar to: Cisco 7970 problems

I don't see that anywhere. Here is my zapata.conf This is only happing on my 7970 all other phone are working without trouble. [channels] context=pri signalling=pri_cpe switchtype=dms100 group=1 usecallerid=yes hidecallerid=no restrictcid=no usecallingpres=no useincomingcalleridonzaptransfer=yes callerid=asreceived faxdetect=incoming musiconhold=default echocancel=yes

Hi All I'm trying to get my 7970 working on the latest head version of Asterisk without success, perhaps someone could help. I'm using the head version of Asterisk with the chan_sccp from berlios.de dated 7th August. The compilation of chan_sccp seems to have worked without any problem, however I'm pretty sure the problem I have is with the config files in TFTPBOOT:- With the 7970

I just wanted to post this so that it was out there and Googleable. Hopefully it will save other people a bit of time. If you have a Cisco phone (I was testing with a 7970, though presumably it would affect 7960 and others as well) that is looping trying to fetch the CTL tlv file - it may be because you are using Debians 'tftpd' (should be netkit-tftpd...*cough*hey, Debian

I search Google to find how to get the message light to flash on my Cisco 7960 running (Application Load ID POS3-06-3-00) (Boot Load ID PC03M030) (DSP Load ID PS03AT38) All I see is about the sip.conf file witch mine has the mailbox=XXXX but still no light. Also the messages button does not work. Any ideas?

I've just recieved a copy of the new SIP firmware for the Cisco 7970, those of you with Cisco accounts may wish to try it (shock horror I'm sticking with SCCP). This coincides with the release of v8 firmware for all Cisco phones (and for those of you running Sergio's chan_sccp v8 works fine) The firmware is now also (and for the 7970 SIP, only) distributed in ".cop" files,

- How to restart the phone? (On 7960 it is *+6+Settings) - How to setup working dtmf? - How to setup hinting? For line is <line button="4"> <featureID>9</featureID> ... For speeddial is <line button="5"> <featureID>2</featureID> <featureLabel>341</featureLabel> <speedDialNumber>341</speedDialNumber> </line>

Yes, but the 7970 relies on the very latest SCCP protocol version which was introduced with Call Manager 4.0. As far as I know the SCCP module for Asterisk doesn't support the latest SCCP version so I don't think it will work. The 7960 works with the older versions of SCCP. I have yet to hear of anyone getting the 7970 to work with *. If someone has please update the list with

Does anyone have the 7970 work with sccp? I have used the example configurations from the wiki. I can see that the phone is failing to retrieve the CTLSEP<MAC>.tlv file and then is able to retrieve the SEP<MAC>.cnf.xml file. The phone is hanging with the message "updating ctl". Thanks, John SEP<MAC>.cnf.xml: <device> <devicePool>

Evnin' (o; As chan_sccp is pretty much dead, doesn't compile on FBSD anyway and isn't supported on * 1.4.x I tried going with chan_skinny... The Cisco 7970 registers and is being acknowledged by * but that's it... I see no lines on the 7970 display configured and it is not reachable or it can't make any outboudn calls... The docs are pretty non-existent for skinny and the

I currently have two Cisco phones, a 7960 and 7970. The 7960 has a SIP OS on it and the 7970 has a SCCP. When the 7960 powers up it loads OS79XX.TXT, SIPDefault.cnf, SIP000E3875266C.cnf, RINGLIST.DAT, and dialplan.xml. I have a Cisco SmartNet agreement with the phone so I have access to download the firmware. I recently purchased a Cisco 7970 phone and was in the process of configuring

Do you know where to find clear developers' guides (with some examples) for developing apps that run *on* Cisco 79xx phones (especially the 7970)? Examples that can run against Asterisk (not CallManager) with SIP firmware (not SCCP), and/or LDAP directories (or other open servers) would be best. On Sat, 2007-09-01 at 12:00 -0500, asterisk-users-request at lists.digium.com wrote: > Date:

I am currently testing an asterisk server with some cisco 7960 phones. I have been having problems with phones rebootin using 6.3 firmware in the asterisk voicemail menus. The phones reboot after a dozen or so random button presses while in the voicemail menus. To try and fix this, I upgraded to sip 7.1 only to find that now the phones reboot even if i'm trying to press a button to

I'm trying to buy the cisco firmware update but it seems that i cannot order online because I bought my 7970 on ebay. Is there any other chance to get this update? ... anyone can make me a favour and send it to me by email? thank you

Hi Everyone - I just got my hands on a Cisco 7970 and was told that I should do a factory reset before trying to configure it to work with Asterisk. After the factory reset, it will not boot at all, instead sits with the line button lights flashing one at a time in sequence. I have had no luck trying to figure it out - anyone run into the same problem that can lend a hand..? Thanks

Hi, I use Asterisk-1.4.22-3 (on Trixbox) and I have a problem with Cisco 7941G with firmware SIP41.8-0-2SR1S (but also with SIP41.8-3-1S), my problem is that Cisco phone isn't authenticated on Asterisk. In tftp directory I have: apps41.1-1-1-15.sbn cnu41.3-1-1-15.sbn copstart.sh cvm41sip.8-0-1-18.sbn dialplan.xml dsp41.1-1-1-15.sbn jar41sip.8-0-1-18.sbn load115 load308 load309 load30018

Hello; Maybe this is a little off-topic, but I need help. I need to repair a cisco 7970, but in my country(spain) cisco is only selling, they don't repair if you're not client. Because I bought on ebay, I'm not client, so I have no chance. I tried to repair by myself, the problem is on the LCD screen, I need a replace, anyone know which part number is it (manufacturer and part

Dear Asterisk People, I am having problems putting a SIP image on a 7970. I was wondering if anyone can help? First problem is the phone is running version Load IDJar70.2-5-47-17.sbn Boot Load ID7970_64054100.bin Version5.0(0.6S) So I did read that you couldn't simply put the latest SIP image on such an old phone and a newer firmware version should be used. I got

Aaron Any idea how to change it from 24hr to 12hr ? Thanks again! -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Hall, Eric M. Sent: Friday, May 05, 2006 11:55 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: RE: Spam? Re: [Asterisk-Users] Cisco 7970 running SIP question Aaron Yes it

Does anyone know what triggers the 7970 to update its config? I was able to get it to update to SIP, but the config I used initially won't go away. I am making small changes to the SEPxxx.cnf.xml file and rebooting the phone, the phone is downloading the (TFTP) new config file, but I don't see any change on the phone itself. I've looked at the VersionStamp and incremented that, but

Hello I patche dmy 7970 with the current SIP image i have 2 lines on it via sip and 6 hint speeddials but it seems thats only a speeddial no infos about busy status or so comes to the speddial button. somebody can help me?