similar to: Asterisk & BRI in the USA - Episode 2 "The Phantom Sales Rep"

Hey all, It such a shame that BRI technology is such a flop in the USA. For a small office such as mine it would be a great product. So her goes my question.... What is a known asterisk working BRI card that will operate in the USA. I need to weigh price/quality. I need to do DID/DDI (or what ever you want to call it). Asterisk will do everything else I need. The ILEC has at the other

Ok here is one for you. I know we all do the this for 911: exten => _911,1,Dial(Zap/1/911) exten => _9911,1,Dial(Zap/1/911) And this probably is more then acceptable for most of us. However I have a system setup that uses SIP for most calls and 1 POTS line. We use a "least cost" routing that uses the POTS line for local calls AND SIP when appropiate. What I want to do is

Hello all, I'm looking for software for my asterisk logs that will compile the information into nice web-based charts and graphs. Something that works similar to webalizer for apache. I want to be able to spot trends of usage, call volume levels, disconnect/failure levels, and basically see exactly where my system has been at over the past day/week/month, etc. . I would prefer for

Ok this is a simple question... What has been your experience with the WellTech 38xx series (I'm looking specifically at the 3802) VoIP gateway? I'm looking for a good (and hopefully not too expensive) VoIP/T.38 gateway for my office. Asterisk intergration is not a major factor at this time but may be later on. How well does it work? Is Echo a problem? Do the T.38 capablities

Does anybody have a good link how to connect Sipura with Asteriks, both behind NAT? I'm using FWD but their connection is like a weather (especially IAX), I need something more reliable. I was thinking of using stun and/or proxy but can not find any good link explaining how to setup Linux server -- #Joseph

Hello, I'm looking for an ISDN BRI-U interface for use in the US. I'm primarily interested in using the BRI as a trunking interface into the PSTN with Asterisk. Naturally, cheaper is better. I currently use a Nortel Norstar system with BRI-U trunks, and really like the digital PSTN interface. Would really like to replace the whole mess with Asterisk but want to keep the ISDN trunks.

Hi list, I'm evaluating a private telephony scenario of about 20 locations - 300 phones, 50 FAX machines. Initial overview points to the installation of asterisk at three locations connected to the PSTN via ISDN PRI. All other locations, small by themselves, would get SIP phones managed by asterisk, since there is good IP connectivity between all sites. Now on to the

Hello Everyone, I am looking to getting converged with the local ILEC here in Canada (Bell or Telus), and was wondering if I can get some more information about typical setups. DIDs and channel offerings from third party clecs does not fit our business model and that's why we are looking to purchasing phone numbers directly from the ILEC, and manging our own PRIs for a convergence of sorts.

I am looking for a provider that will provide an equivalent of DID/DOD trunks via IAX, IAX2 or SIP using numbers in Metro Chicago (prefer Skokie), LA (prefer West Hollywood or Venice), and/or Orlando (prefer Winter Garden). If I can migrate some of my existing numbers using LNP, that would be even better, but it is not a requirement. While I know that there are several companies that will

Folks -- First, apologies for not lurking for weeks or months to get the culture of the list. I read the recent post about improvement to the quality of posts with some amusement and full agreement. The problem is a big and very real one. I hope I'm not deepening it. But my question isn't explicitly asked with this subject line or definitively answered in the archives -- that I have

Hello Everyone, We are looking to interconnect with a local ILEC over an OC-n transport layer. They basically gave us two options in terms of mapping the SONET to the DS3: * VT1.5s mapping * DS1s mapping The second option is quite clear. We would MUX the connection, and plug the lines into qaud t1 cads etc... The tech mentioned that with the second option we would also need a DACS to convert

Hi folks. My client is wanting to use call forwarding configured on their phones (Linksys SPA942), with a PRI from their provider. When we configure call forwarding, we invariably get a "The number you have dialed is not in service" message from the providers. Examining the detailed dial plan debugging as well as the PRI debugging, the number is dialed correctly. The only difference

I was playing around with conferencing tonight. I was able to place a bunch of SIP phones and a couple of my Zap FXS phones into a conference. So I thought, "Let's see what it's like when people come in from outside." So I called a friend and had him call in on one of my Zap channels, WHICH IS CONNECTED TO MY POTS LINE THAT DOESN'T DO DISCONNECT SUPERVISION. When he

Hi, I've briefly reviewed your excellent software (OpenSSH) and thought I'd let you know. The podcast aired on 27/06/2009 . You can find it on www.sourcetrunk.com . If you are under the impression that your software was not reviewed like it should and/or did not get the review that it deserved, please let me know and I'll make adjustments and addenda in the next episode. Since the

I''m working with a similar model in Episode 73, (my scenario is editing multiple pictures for a product using attachment_fu). And I''m getting an error when I try the technique suggested: ./views/admin/_form.rhtml <% for picture in product.pictures %> <% fields_for "product[picture_attributes][]", picture do | picture_form| %> Title: <%=

Asterisk 1.2 has no support of t.38 whatsoever, the call will drop before t.38 is ever utilised, not even pass-thru. 1.4 Adds support for T.38 pass through only and no other sort of faxing, the endpoint must support T.38 and you must send your call to a T.38 gateway and you must not use NAT anywhere in your network and you must enable re-invites which could cause CDRs not to reflect the true

I recently updated to the newest stable wine through the ppa for Ubuntu. I didn't have problems running Half Life 2 E1 before upgrading but now I have a few issues. When launching the game it's in a sort of a windowed mode and then when it goes to load the main menu it tries to go fullscreen but I can still see my dock and my top panel. If I adjust the screen resolution and set it back I

Hi there. When I launch setup.exe with wine, I've got Code: wine: cannot find L"C:\\windows\\system32\\dxdllreg.exe" fixme:win:DisableProcessWindowsGhosting : stub wine: Call from 0x7ef91690 to unimplemented function MFC42.DLL.6467, aborting wine: Call from 0x7ef91690 to unimplemented function MFC42.DLL.6467, aborting MFC42.DLL is a .dll file which I had to download. I put it in

Hey, I solved my "The installation source given by device ['sdb2'] could not be found". Apparently ignoredisk is so strong it not only ignores the disks to be partitioned but also the disks holding the installation source... Now I ran into: ? In interactive step cleardiskssel, can't continue In anaconda.log I saw: ? step installtype does not exist ? step confirminstall

Hello Community, Getting back to my previous post, here a a complement: - Having enabled sieve, I can store mails and create folder under the recipient - Having enabled public folders, I can move mail into them using a client (eg Thunderbird); security is therefore ok (actually I gave full control to the user) eg Public/Newsletters/SomeCompany - *BUT* running a sieve script to store to